NMR Elucidation of Non-productive Binding Sites of 13C-Labeled Lignin Models with Carbohydrate Binding Module of Cellobiohydrolase I for Efficient Biomass Conversion

Abstract Background: Highly efficient enzymatic saccharification of pretreated lignocellulose is a primary key step in achieving lignocellulosic biorefinery. Cellobiohydrolase I (Cel7A) secreted by Trichoderma reesei is an industrially used cellulase possessing carbohydrate binding module 1 (TrCBM1) as the C-terminal domain. Non-productive binding of TrCBM1 to lignin significantly decreases enzymatic saccharification efficiency and enhance cost of biomass conversion due to required additional enzymes. Understanding of the interaction mechanism between lignin and TrCBM1 is essentially required to realize cost-effective biofuels production, but the binding sites in lignin have not been clearly elucidated. Results: Three types of 13C-labeled b-O-4 lignin oligomer models were synthesized and characterized. The 2D 1H-13C HSQC spectra of the 13C-labeled lignin models exhibited that 13C-labels were correctly incorporated in the (1) aromatic rings and b positions, (2) a positions, and (3) methoxy groups, respectively. The TrCBM1 binding sites in lignin were analyzed by observing NMR chemical shift perturbations (CSPs) using the synthetic 13C-labeled b-O-4 lignin oligomer models. Obvious CSPs were observed in signals from the aromatic regions in oligomers bound to TrCBM1, whereas perturbations in the signals from aliphatic regions and methoxy groups were insignificant. This indicated that hydrophobic interactions and p–p stacking were dominating factors in non-productive binding. The synthetic lignin models have two configurations whose terminal units were differently aligned and donated C(I) and C(II). The C(I) ring showed remarkable perturbation compared with C(II), which indicated that binding of TrCBM1 is evidently affected by configuration of lignin models. Long-chain lignins (DP 4.16–4.70) clearly bound to TrCBM1. Interactions with short-chain lignins (DP 2.64–3.12) were insignificant, indicating that a DP greater than 4 was necessary for TrCBM1 binding. Conclusion: The CSP analysis using 13C-labeled b-O-4 lignin oligomer models enabled us to identify TrCBM1 binding sites in lignin at the atomic level. This specific interaction analysis will lead to new molecular design of cellulase having controlled affinity to cellulose and lignin for cost-effective biorefinery process.

Download Full-text

NMR elucidation of nonproductive binding sites of lignin models with carbohydrate-binding module of cellobiohydrolase I

Biotechnology for Biofuels ◽

10.1186/s13068-020-01805-w ◽

2020 ◽

Vol 13 (1) ◽

Author(s):

Yuki Tokunaga ◽

Takashi Nagata ◽

Keiko Kondo ◽

Masato Katahira ◽

Takashi Watanabe

Keyword(s):

Binding Sites ◽

Specific Interaction ◽

Enzymatic Saccharification ◽

Cost Effective ◽

Biofuel Production ◽

Carbohydrate Binding ◽

Carbohydrate Binding Module ◽

Cellobiohydrolase I ◽

Methoxy Groups ◽

Nonproductive Binding

Abstract Background Highly efficient enzymatic saccharification of pretreated lignocellulose is a key step in achieving lignocellulosic biorefinery. Cellobiohydrolase I (Cel7A) secreted by Trichoderma reesei is an industrially used cellulase that possesses carbohydrate-binding module 1 (TrCBM1) at the C-terminal domain. The nonproductive binding of TrCBM1 to lignin significantly decreases the enzymatic saccharification efficiency and increases the cost of biomass conversion because of the additionally required enzymes. Understanding the interaction mechanism between lignin and TrCBM1 is essential for realizing a cost-effective biofuel production; however, the binding sites in lignin have not been clearly elucidated. Results Three types of 13C-labeled β-O-4 lignin oligomer models were synthesized and characterized. The 2D 1H–13C heteronuclear single-quantum correlation (HSQC) spectra of the 13C-labeled lignin models confirmed that the three types of the 13C labels were correctly incorporated in the (1) aromatic rings and β positions, (2) α positions, and (3) methoxy groups, respectively. The TrCBM1-binding sites in lignin were analyzed by observing NMR chemical shift perturbations (CSPs) using the synthetic 13C-labeled β-O-4 lignin oligomer models. Obvious CSPs were observed in signals from the aromatic regions in oligomers bound to TrCBM1, whereas perturbations in the signals from aliphatic regions and methoxy groups were insignificant. These findings indicated that hydrophobic interactions and π–π stacking were dominating factors in nonproductive binding. The synthetic lignin models have two configurations whose terminal units were differently aligned and donated C(I) and C(II). The C(I) ring showed remarkable perturbation compared with the C(II), which indicated that the binding of TrCBM1 was markedly affected by the configuration of the lignin models. The long-chain lignin models (degree of polymerization (DP) 4.16–4.70) clearly bound to TrCBM1. The interactions of TrCBM1 with the short-chain lignin models (DP 2.64–3.12) were insignificant, indicating that a DP greater than 4 was necessary for TrCBM1 binding. Conclusion The CSP analysis using 13C-labeled β-O-4 lignin oligomer models enabled the identification of the TrCBM1 binding sites in lignins at the atomic level. This specific interaction analysis will provide insights for new molecular designs of cellulase having a controlled affinity to cellulose and lignin for a cost-effective biorefinery process.

Download Full-text

NMR Elucidation of Nonproductive Binding Sites of Lignin Models with Carbohydrate-Binding Module of Cellobiohydrolase I

10.21203/rs.3.rs-36005/v2 ◽

2020 ◽

Author(s):

Yuki Tokunaga ◽

Takashi Nagata ◽

Keiko Kondo ◽

Masato Katahira ◽

Takashi Watanabe

Keyword(s):

Binding Sites ◽

Specific Interaction ◽

Enzymatic Saccharification ◽

Cost Effective ◽

Biofuel Production ◽

Carbohydrate Binding ◽

Carbohydrate Binding Module ◽

Cellobiohydrolase I ◽

Methoxy Groups ◽

Nonproductive Binding

Abstract Background : Highly efficient enzymatic saccharification of pretreated lignocellulose is a key step in achieving lignocellulosic biorefinery. Cellobiohydrolase I (Cel7A) secreted by Trichoderma reesei is an industrially used cellulase that possesses carbohydrate-binding module 1 (TrCBM1) at the C-terminal domain. The nonproductive binding of TrCBM1 to lignin significantly decreases the enzymatic saccharification efficiency and increases the cost of biomass conversion because of the additionally required enzymes. Understanding the interaction mechanism between lignin and TrCBM1 is essential for realizing a cost-effective biofuel production; however, the binding sites in lignin have not been clearly elucidated.Results: Three types of 13C-labeled β-O-4 lignin oligomer models were synthesized and characterized. The 2D 1H–13C heteronuclear single-quantum correlation (HSQC) spectra of the 13C-labeled lignin models confirmed that the three types of the 13C labels were correctly incorporated in the (1) aromatic rings and β positions, (2) α positions, and (3) methoxy groups, respectively. The TrCBM1 binding sites in lignin were analyzed by observing NMR chemical shift perturbations (CSPs) using the synthetic 13C-labeled β-O-4 lignin oligomer models. Obvious CSPs were observed in signals from the aromatic regions in oligomers bound to TrCBM1, whereas perturbations in the signals from aliphatic regions and methoxy groups were insignificant. These findings indicated that hydrophobic interactions and π–π stacking were dominating factors in nonproductive binding. The synthetic lignin models have two configurations whose terminal units were differently aligned and donated C(I) and C(II) . The C(I) ring showed remarkable perturbation compared with the C(II) , which indicated that the binding of TrCBM1 was markedly affected by the configuration of the lignin models. The long-chain lignin models (degree of polymerization (DP) 4.16–4.70) clearly bound to TrCBM1. The interactions of TrCBM1 with the short-chain lignin models (DP 2.64–3.12) were insignificant, indicating that a DP greater than 4 was necessary for TrCBM1 binding.Conclusion: The CSP analysis using 13C-labeled β-O-4 lignin oligomer models enabled the identification of the TrCBM1 binding sites in lignins at the atomic level. This specific interaction analysis will provide insights for new molecular designs of cellulase having a controlled affinity to cellulose and lignin for a cost-effective biorefinery process.

Download Full-text

Novel xylan-binding properties of an engineered family 4 carbohydrate-binding module

Biochemical Journal ◽

10.1042/bj20070128 ◽

2007 ◽

Vol 406 (2) ◽

pp. 209-214 ◽

Cited By ~ 19

Author(s):

Lavinia Cicortas Gunnarsson ◽

Cedric Montanier ◽

Richard B. Tunnicliffe ◽

Mike P. Williamson ◽

Harry J. Gilbert ◽

...

Keyword(s):

Ligand Binding ◽

Binding Site ◽

Hydrophobic Interactions ◽

Molecular Engineering ◽

Carbohydrate Binding ◽

Carbohydrate Binding Module ◽

Wild Type ◽

Rhodothermus Marinus ◽

Binding Properties ◽

Carbohydrate Binding Modules

Molecular engineering of ligand-binding proteins is commonly used for identification of variants that display novel specificities. Using this approach to introduce novel specificities into CBMs (carbohydrate-binding modules) has not been extensively explored. Here, we report the engineering of a CBM, CBM4-2 from the Rhodothermus marinus xylanase Xyn10A, and the identification of the X-2 variant. As compared with the wild-type protein, this engineered module displays higher specificity for the polysaccharide xylan, and a lower preference for binding xylo-oligomers rather than binding the natural decorated polysaccharide. The mode of binding of X-2 differs from other xylan-specific CBMs in that it only has one aromatic residue in the binding site that can make hydrophobic interactions with the sugar rings of the ligand. The evolution of CBM4-2 has thus generated a xylan-binding module with different binding properties to those displayed by CBMs available in Nature.

Download Full-text

The family 21 carbohydrate-binding module of glucoamylase from Rhizopus oryzae consists of two sites playing distinct roles in ligand binding

Biochemical Journal ◽

10.1042/bj20051982 ◽

2006 ◽

Vol 396 (3) ◽

pp. 469-477 ◽

Cited By ~ 27

Author(s):

Wei-I Chou ◽

Tun-Wen Pai ◽

Shi-Hwei Liu ◽

Bor-Kai Hsiung ◽

Margaret D.-T. Chang

Keyword(s):

Ligand Binding ◽

Binding Sites ◽

Catalytic Domain ◽

Rhizopus Oryzae ◽

Structural Information ◽

Molecular Model ◽

Site Directed Mutagenesis ◽

Carbohydrate Binding ◽

Carbohydrate Binding Module ◽

Ligand Binding Sites

The starch-hydrolysing enzyme GA (glucoamylase) from Rhizopus oryzae is a commonly used glycoside hydrolase in industry. It consists of a C-terminal catalytic domain and an N-terminal starch-binding domain, which belong to the CBM21 (carbohydrate-binding module, family 21). In the present study, a molecular model of CBM21 from R. oryzae GA (RoGACBM21) was constructed according to PSSC (progressive secondary structure correlation), modified structure-based sequence alignment, and site-directed mutagenesis was used to identify and characterize potential ligand-binding sites. Our model suggests that RoGACBM21 contains two ligand-binding sites, with Tyr32 and Tyr67 grouped into site I, and Trp47, Tyr83 and Tyr93 grouped into site II. The involvement of these aromatic residues has been validated using chemical modification, UV difference spectroscopy studies, and both qualitative and quantitative binding assays on a series of RoGACBM21 mutants. Our results further reveal that binding sites I and II play distinct roles in ligand binding, the former not only is involved in binding insoluble starch, but also facilitates the binding of RoGACBM21 to long-chain soluble polysaccharides, whereas the latter serves as the major binding site mediating the binding of both soluble polysaccharide and insoluble ligands. In the present study we have for the first time demonstrated that the key ligand-binding residues of RoGACBM21 can be identified and characterized by a combination of novel bioinformatics methodologies in the absence of resolved three-dimensional structural information.

Download Full-text