Parametric Study of Stacked Microstrip Patch Antenna with Dissimilar Substrates

2018 ◽  
Vol 10 (4) ◽  
pp. 04004-1-04004-4
Author(s):  
S. Bouttout ◽  
◽  
Y. Bentrcia ◽  
S. Benkouda ◽  
T. Fortaki ◽  
...  

This paper presents broadband circular polarized conformal antenna with a square patch for on-board applications. The substrate is located in between patch and the ground. A novel Circular polarized square patch with microstrip feed with two truncated corners with conformal structure is designed. Using a parametric study on the effect of the position of feed, the antenna parameters VSWR bandwidth, half power beam width and polarization of antenna are analysed. Finally fabrication of conformal square patch on 2.2 dialectic substrate and measured results are discussed.


2020 ◽  
Vol 17 (2) ◽  
pp. 1469-1473
Author(s):  
Ahmed Jamal Abdullah Al-Gburi ◽  
I. M. Ibrahim ◽  
Z. Zakaria

A rectangular microstrip patch antenna over ultra-wideband with superstrate are designed and analyzed. Four iterations A, B, C, D were designs. Iterations A and B represent the parametric study of the microstrip patch antenna. Iteration C represents Ultrawide band microstrip patch antenna with peak realized gain 4.196 dB at frequency 10.12 GHz, the gain was enhance using superstrate above the microstrip patch antenna as in iteration D, a novel enhancement happens for the whole ultra-wideband frequency band (3.1–10.6 GHz) with highest salient realised gain of 5.3 dB at frequency 10.55 GHz. The proposed antenna gain at iteration D is increased by 26.49%, which is useful for many applications such as satellite communication. Simulation and discussion results of the proposed antenna are present within this paper.


2020 ◽  
Vol 13 (3) ◽  
pp. 1-4 ◽  
Author(s):  
V. A. Sankar Ponnapalli ◽  
Kaithi Deepthi Reddy ◽  
Shaik Aqeel

AbstractParametric study and analysis of microstrip patch antenna with multiple slit positions is presented in this research contribution. This work is aimed to design a microstrip patch antenna, which can able resonate dual-band frequencies (i.e. 3.5 GHz and 5.3 GHz) with a trade-off between the geometrical parameters. The proposed antenna designed using the multiple slits on the patch, RT Duroid 5880 as substrate material, and with a defected ground structure. Owing to the geometrical miniaturization this antenna will be capable to work at sophisticated communication systems where size of the communication system is a desired parameter.


2016 ◽  
Vol 35 (2) ◽  
pp. 316-339
Author(s):  
Huat Yeap Kim ◽  
Widad Ismail ◽  
Leng Yap Soon ◽  
Ho Yeap Kim

2012 ◽  
Vol 2 (8) ◽  
pp. 130-133
Author(s):  
Amandeep Singh Amandeep Singh ◽  
◽  
Sankul Agarwal ◽  
Vaibhav Sharma ◽  
Shivam Pandita

Sign in / Sign up

Export Citation Format

Share Document