scholarly journals Multiple Trinexapac-ethyl Applications Reduce Kentucky Bluegrass Sod Storage Temperatures

2001 ◽  
Vol 11 (4) ◽  
pp. 595-598 ◽  
Author(s):  
Neil L. Heckman ◽  
Roch E. Gaussoin ◽  
Garald L. Horst
Keyword(s):  
Methyl Ester ◽  
Experimental Design ◽  
Poa Pratensis ◽  
Acid Methyl Ester ◽  
Kentucky Bluegrass ◽  
Acid Methyl ◽  
Rate Of Heating ◽  
Market Areas ◽  
Storage Times ◽  
Storage Temperatures

Sod heating during storage can limit the distance sod may be shipped. Two experiments were conducted to determine the effect of multiple preharvest applications of trinexapac-ethyl [4-cyclopropyl-α-hydroxy-methylene)-3,5-dioxocyclohexanecarboxylic acid methyl ester] at 0.23 kg·ha-1 (0.21 lb/acre) on kentucky bluegrass (Poa pratensis) sod temperatures during the first 24 h of storage. Experimental design was completely randomized with three replications and a 2 (trinexapac-ethyl verses control) × 3 (8-h storage intervals) factorial arrangement of treatments. Trinexapac-ethyl treatments were applied 6 and 2 weeks before harvest in the first experiment and 10, 6, and 2 weeks before harvest in the second experiment. Two and three applications of trinexapac-ethyl reduced sod storage temperatures. The reduction in rate of heating in treated sod became significantly different than untreated sod within 4 h after harvest. Mean sod temperatures in both experiments were 3 °C (6 °F) cooler in treated sod after 12 h of storage than untreated sod. These results suggest that trinexapac-ethyl could be used by sod growers to extend storage times and increase shipping and market areas. A multiple application program can enable sod growers to maximize the enhancement effects of trinexapacethyl on sod storage life.

scholarly journals Heat Tolerance of Kentucky Bluegrass as Affected by Trinexapac-ethyl

HortScience ◽  
2001 ◽  
Vol 36 (2) ◽  
pp. 365-367 ◽  
Author(s):  
Neil L. Heckman ◽  
Garald L. Horst ◽  
Roch E. Gaussoin ◽  
Linda J. Young
Keyword(s):  
Heat Stress ◽  
Heat Tolerance ◽  
Vapor Pressure Deficit ◽  
Poa Pratensis ◽  
Acid Methyl Ester ◽  
Kentucky Bluegrass ◽  
Single Application ◽  
Heat Accumulation ◽  
Lethal Temperatures ◽  
Acid Methyl

Heat accumulation during storage of sod may reach lethal temperatures within 4 days, decreasing sod quality. Treatment with trinexapac-ethyl reduces heat accumulation during sod storage. However, heat tolerance of grasses treated with trinexapacethyl has not been documented. Our objectives were to: 1) determine the lethal temperatures for Kentucky bluegrass (Poa pratensis L.); and 2) identify the effect of a single application of trinexapac-ethyl on heat tolerance. Experimental design was a randomized complete block with three replications and a two (trinexapac-ethyl vs. control) × two (cultivars) factorial arrangement of treatments. Ten days after chemical treatment, Kentucky bluegrass sprigs were exposed to heat stress for 4 days in a temperature gradient block under low vapor pressure deficit. Treatment with trinexapac-ethyl at 0.23 kg·ha-1 reduced heat tolerance. Temperature needed to kill 50% of the population was 35.5 °C for treated vs. 36.1 °C for nontreated grass. Trinexapac-ethyl is in the same chemical family as the cyclohexanedione herbicides that interfere with lipid syntheses in grasses. This may be a reason for the slight decrease in heat tolerance. The practical value of trinexapac-ethyl treatment in reducing heat accumulation during storage of sod may be partially negated by a decrease in heat tolerance. Chemical name used: [(4-cyclopropyl-α-hydroxy-methylene)-3,5-dioxocyclohexanecarboxylic acid methyl ester] (trinexapac-ethyl).

Evaluation of the Impact of Fatty Acid Methyl Ester (FAME) Contamination on the Thermal Stability of Jet A

2013 ◽  
Author(s):  
Jr Morris ◽  
Shardo Robert W. ◽  
Higgins James ◽  
Cook Kim ◽  
Tanner Rhonda ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Fatty Acid ◽  
Methyl Ester ◽  
Fatty Acid Methyl Ester ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
The Impact ◽  
Thermal Stability Of

Optical Absorption Enhancement in Polymer BHJ thin Film Using Ag Nanostructures: A Simulation Study

2020 ◽  
Vol 16 (4) ◽  
pp. 556-567
Author(s):  
Asma Khalil ◽  
Zubair Ahmad ◽  
Farid Touati ◽  
Mohamed Masmoudi
Keyword(s):  
Absorption Spectrum ◽  
Solar Cell ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cell ◽  
Short Circuit ◽  
Acid Methyl Ester ◽  
Short Circuit Current ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

Background: The photo-absorption and light trapping through the different layers of the organic solar cell structures are a growing concern now-a-days as it affects dramatically the overall efficiency of the cells. In fact, selecting the right material combination is a key factor in increasing the efficiency in the layers. In addition to good absorption properties, insertion of nanostructures has been proved in recent researches to affect significantly the light trapping inside the organic solar cell. All these factors are determined to expand the absorption spectrum and tailor it to a wider spectrum. Objective: The purpose of this investigation is to explore the consequence of the incorporation of the Ag nanostructures, with different sizes and structures, on the photo absorption of the organic BHJ thin films. Methods: Through a three-dimensional Maxwell solver software, Lumerical FDTD, a simulation and comparison of the optical absorption of the three famous organic materials blends poly(3- hexylthiophene): phenyl C71 butyric acid methyl ester (P3HT:PCBM), poly[N-9″-heptadecanyl-2,7- carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)]: phenyl C71 butyric acid methyl ester (PCDTBT:PCBM) and poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b′]dithiophene)-alt- 4,7-(2,1,3-benzothiadiazole)]: phenyl C71 butyric acid methyl ester (PCDPDTBT:PCBM) has been conducted. Furthermore, FDTD simulation study of the incorporation of nanoparticles structures with different sizes, in different locations and concentrations through a bulk heterojunction organic solar cell structure has also been performed. Results: It has been demonstrated that embedding nanostructures in different locations of the cell, specifically in the active layer and the hole transporting layer had a considerable effect of widening the absorption spectrum and increasing the short circuit current. The effect of incorporation the nanostructures in the active layer has been proved to be greater than in the HTL. Furthermore, the comparison results showed that, PCDTBT:PCBM is no more advantageous over P3HT:PCBM and PCPDTBT:PCBM, and P3HT:PCBM took the lead and showed better performance in terms of absorption spectrum and short circuit current value. Conclusion: This work revealed the significant effect of size, location and concentration of the Ag nanostructures while incorporated in the organic solar cell. In fact, embedding nanostructures in the solar cell widen the absorption spectrum and increases the short circuit current, this result has been proven to be significant only when the nanostructures are inserted in the active layer following specific dimensions and structures.

scholarly journals Evaluation of 3-Methylbutanoic Acid Methyl Ester as a Factor Influencing Flavor Cleanness in Arabica Specialty Coffee

2021 ◽  
Vol 11 (12) ◽  
pp. 5413
Author(s):  
Keiko Iwasa ◽  
Harumichi Seta ◽  
Yoshihide Matsuo ◽  
Koichi Nakahara
Keyword(s):  
Methyl Ester ◽  
Methyl Esters ◽  
Acid Methyl Ester ◽  
Chemical Compounds ◽  
Gas Chromatography Mass Spectrometry ◽  
Arabica Coffee ◽  
Acid Methyl ◽  
Coffee Brew ◽  
Coffee Beans ◽  
Specialty Coffee

This paper reports on the chemical compounds in arabica coffee beans with a high Specialty Coffee Association (SCA) cupping score, especially those in specialty coffee beans. We investigated the relationship between the chemical compounds and cupping scores by considering 16 types of Coffea arabica (arabica coffee) beans from Guatemala (SCA cupping score of 76.5–89.0 points). Non-targeted gas chromatography-mass spectrometry-based chemometric profiling indicated that specialty beans with a high cupping score contained considerable amounts of methyl-esterified compounds (MECs), including 3-methylbutanoic acid methyl ester (3-MBM), and other fatty acid methyl esters. The effect of MECs on flavor quality was verified by spiking the coffee brew with 3-MBM, which was the top-ranked component, as obtained through a regression model associated with cupping scores. Notably, 3-MBM was responsible for the fresh-fruity aroma and cleanness of the coffee brew. Although cleanness is a significant factor for specialty beans, the identification of compounds that contribute to cleanness has not been reported in previous research. The chemometric profiling approach coupled with spiking test validation will improve the identification and characterization of 3-MBM commonly found in arabica specialty beans. Therefore, 3-MBM, either alone or together with MECs, can be used as a marker in coffee production.

Sign in / Sign up

Export Citation Format

Share Document