Positively Charged Quaternized Chitosan Poly(Vinylidene Fluoride) Membrane for Selective Separation of Negatively Charged Polysaccharides –Exemplified with Heparin

A commercial ultrafiltration (UF) membrane (HFM-183 de Koch Membrane Systems) made of poly(vinylidene fluoride) (PVDF), was recovered with a negatively-charged polyelectrolyte (poly(sodium 4-styrenesulfonate)) (PSS), and the effects on its electric, chemical, and morphological properties were analyzed. Atomic force microscopy (AFM), liquid–liquid displacement porometry, Electrical Impedance Spectroscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy were used to investigate the modifications induced by the deposition of PSS on the PVDF positively-charged membrane and after its treatment by a radio frequency Ar-plasma. These techniques confirmed a real deposition and posterior compaction of PSS with increasing roughness and decreasing pore sizes. The evolution of the electric resistances of the membranes confirmed crosslinking and compaction with shielding of the sulfonated groups from PSS. In this way, a membrane with a negatively-charged active layer and a pore size which was 60% lower than the original membrane was obtained. The composition of the additive used by manufacturers to modify PVDF to make it positively charged was obtained by different procedures, all of which depended upon the results of X-ray photoelectron spectroscopy, leading to fairly consistent results. This polymer, carrying positive charges, contains quaternary nitrogen, as confirmed by XPS. Moreover, Raman spectroscopy confirmed that PVDF changes from mostly the to the α phase, which is more stable as a substrate for the deposited PSS. The aim of the tested modifications was to increase the retention of divalent anions without reducing permeability.

Download Full-text

Piezoelectric β-polymorph formation of new textiles by surface modification with coating process based on interfacial interaction on the conformational variation of poly (vinylidene fluoride) (PVDF) chains

The European Physical Journal Applied Physics ◽

10.1051/epjap/2020200158 ◽

2020 ◽

Vol 91 (3) ◽

pp. 31301

Author(s):

Nabil Chakhchaoui ◽

Rida Farhan ◽

Meriem Boutaldat ◽

Marwane Rouway ◽

Adil Eddiai ◽

...

Keyword(s):

High Efficiency ◽

Vinylidene Fluoride ◽

Research Work ◽

Research Area ◽

Interfacial Interaction ◽

Tetraethyl Orthosilicate ◽

Poly Vinylidene Fluoride ◽

Carbon Nanofillers ◽

The Impact ◽

Advanced Applications

Novel textiles have received a lot of attention from researchers in the last decade due to some of their unique features. The introduction of intelligent materials into textile structures offers an opportunity to develop multifunctional textiles, such as sensing, reacting, conducting electricity and performing energy conversion operations. In this research work nanocomposite-based highly piezoelectric and electroactive β-phase new textile has been developed using the pad-dry-cure method. The deposition of poly (vinylidene fluoride) (PVDF) − carbon nanofillers (CNF) − tetraethyl orthosilicate (TEOS), Si(OCH2CH3)4 was acquired on a treated textile substrate using coating technique followed by evaporation to transform the passive (non-functional) textile into a dynamic textile with an enhanced piezoelectric β-phase. The aim of the study is the investigation of the impact the coating of textile via piezoelectric nanocomposites based PVDF-CNF (by optimizing piezoelectric crystalline phase). The chemical composition of CT/PVDF-CNC-TEOS textile was detected by qualitative elemental analysis (SEM/EDX). The added of 0.5% of CNF during the process provides material textiles with a piezoelectric β-phase of up to 50% has been measured by FTIR experiments. These results indicated that CNF has high efficiency in transforming the phase α introduced in the unloaded PVDF, to the β-phase in the case of nanocomposites. Consequently, this fabricated new textile exhibits glorious piezoelectric β-phase even with relatively low coating content of PVDF-CNF-TEOS. The study demonstrates that the pad-dry-cure method can potentially be used for the development of piezoelectric nanocomposite-coated wearable new textiles for sensors and energy harvesting applications. We believe that our study may inspire the research area for future advanced applications.

Download Full-text