scholarly journals Development of online detection system for natural frequency of brake discs based on the improved least squares complex frequency domain method

2017 ◽  
Vol 19 (4) ◽  
pp. 2795-2805 ◽  
Author(s):  
Zhigang Chu ◽  
Di Huang ◽  
Jiang Wang ◽  
Yang Yang
2004 ◽  
Vol 11 (3-4) ◽  
pp. 395-409 ◽  
Author(s):  
Bart Peeters ◽  
Herman Van der Auweraer ◽  
Patrick Guillaume ◽  
Jan Leuridan

Recently, a new non-iterative frequency-domain parameter estimation method was proposed. It is based on a (weighted) least-squares approach and uses multiple-input-multiple-output frequency response functions as primary data. This so-called “PolyMAX” or polyreference least-squares complex frequency-domain method can be implemented in a very similar way as the industry standard polyreference (time-domain) least-squares complex exponential method: in a first step a stabilisation diagram is constructed containing frequency, damping and participation information. Next, the mode shapes are found in a second least-squares step, based on the user selection of stable poles. One of the specific advantages of the technique lies in the very stable identification of the system poles and participation factors as a function of the specified system order, leading to easy-to-interpret stabilisation diagrams. This implies a potential for automating the method and to apply it to “difficult” estimation cases such as high-order and/or highly damped systems with large modal overlap. Some real-life automotive and aerospace case studies are discussed. PolyMAX is compared with classical methods concerning stability, accuracy of the estimated modal parameters and quality of the frequency response function synthesis.


Author(s):  
Shuncong Zhong ◽  
S. Olutunde Oyadiji

This paper proposes a response-only method in frequency domain for structural damage detection by using the derivative of natural frequency curve of beam-like structures with a traversing auxiliary mass. The approach just uses the response time history of beam-like structures and does not need the external source of force excitation. The natural frequencies of a damaged beam with a traversing auxiliary mass change due to change in flexibility and inertia of the beam as the auxiliary mass is traversed along the beam. Therefore the auxiliary mass can enhance the effects of the crack on the dynamics of the beam and, therefore, facilitating locating the damage in the beam. That is, the auxiliary mass can be used to probe the dynamic characteristic of the beam by traversing the mass from one end of the beam to the other. However, it is impossible to obtain accurate modal frequencies by the direct operation of the Fast Fourier Transform of the response data of the structure because the frequency spectrum can be only calculated from limited sampled time data which results in the well-known leakage effect. A spectrum correction method is employed to estimate high accurate frequencies of structures with a traversing auxiliary mass. In the present work, the modal responses of damaged simply supported beams with auxiliary mass are computed using the Finite Element Analysis. The graphical plots of the natural frequencies versus axial location of auxiliary mass are obtained. The derivatives of natural frequency curve can provide crack information for damage detection of beam-like structures. However, it is suggested that the derivative do not go beyond the third derivative of natural frequency curves to avoid the difference approximation error which will be magnified at higher derivative. The sensitivity of crack index for different noise, crack depth, auxiliary mass and damping ratio are also investigated. The simulated result demonstrated the efficiency and precision of the response-only frequency-domain method which can be recommended for the real application in structural damage detection.


2018 ◽  
Vol 30 (11) ◽  
pp. 1024-1027 ◽  
Author(s):  
Di Wu ◽  
R. Ohnishi ◽  
R. Uemura ◽  
T. Yamaguchi ◽  
S. Ohnuki

Author(s):  
Yuan Huang ◽  
Grigorios Dimitriadis ◽  
Robert E. Kielb ◽  
Jing Li

This paper presents the results from a research effort on eigenvalue identification of mistuned bladed rotor systems using the Least-Squares Complex Frequency-Domain (LSCF) modal parameter estimator. The LSCF models the frequency response function (FRF) obtained from a vibration test using a matrix-fraction description and obtains the coefficients of the common denominator polynomial by minimizing the least squares error of the fit between the FRF and the model. System frequency and damping information is obtained from the roots of the denominator; a stabilization diagram is used to separate physical from mathematical poles. The LSCF estimator is known for its good performance when separating closely spaced modes, but few quantitative analyses have focused on the sensitivity of the identification with respect to mode concentration. In this study, the LSCF estimator is applied on both computational and experimental forced responses of an embedded compressor rotor in a three-stage axial research compressor. The LSCF estimator is first applied to computational FRF data obtained from a mistuned first-torsion (1T) forced response prediction using FMM (Fundamental Mistuning Model) and is shown to be able to identify the eigenvalues with high accuracy. Then the first chordwise bending (1CWB) computational FRF data is considered with varied mode concentration by varying the mistuning standard deviation. These cases are analyzed using LSCF and a sensitivity algorithm is developed to evaluate the influence of the mode spacing on eigenvalue identification. Finally, the experimental FRF data from this rotor blisk is analyzed using the LSCF estimator. For the dominant modes, the identified frequency and damping values compare well with the computational values.


Sign in / Sign up

Export Citation Format

Share Document