INFLUENCE OF PROLONGED CONTINUOUS ORTHODONTIC FORCE ON THE SHEAR BOND STRENGTH OF METALLIC BRACKETS BONDED WITH VARIOUS ADHESIVE SYSTEMS

2017 ◽  
Vol 63 (4) ◽  
pp. 2931-2938
Author(s):  
Ahmad Hafez ◽  
Essam Nassar ◽  
Yasser Abdelnaby
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Adhesive Systems ◽  
Orthodontic Force

Shear Bond Strength of Different Adhesive Systems to Primary Dentin and Enamel

2007 ◽  
Vol 31 (1) ◽  
pp. 35-40 ◽  
Author(s):  
Carla Miranda ◽  
Luiz Henrique Maykot Prates ◽  
Ricardo de Souza Vieira ◽  
Maria Cristina Marino Calvo
Keyword(s):  
Bond Strength ◽  
Failure Mode ◽  
Shear Bond Strength ◽  
Adhesive System ◽  
Mode Analysis ◽  
Single Bond ◽  
Adhesive Systems ◽  
Mean Values ◽  
Failure Mode Analysis ◽  
Distal Direction

The aims of this study were to evaluate the shear bond strength (SBS) of four adhesive systems applied to primary dentin and enamel and verify, after SBS testing, the failure mode of the adhesive interface. Sixty extracted sound primary molars were selected and crowns were sectioned in a mesial-distal direction. Specimens were randomly assigned into two groups (adhesion to enamel and adhesion to dentin) and then subdivided into four subgroups according to the adhesive system (n=15): Scotchbond Multi-Purpose (SMP) – Single Bond (SB) – Clearfil SE Bond (and Adper Prompt LPop (APL) – SBS tests were performed and the obtained values were statistically analyzed using ANOVA and Tukey tests (p<0.05). The failure mode analysis was performed with a Scanning Electron Microscope (XL-30, Philips). SBS mean values on enamel were [MPa (SD)]: SMP – 27.89 (7.49); SB – 23.92 (8.8); CSB – 24.36 (6.69); APL – 25.96 (4.08); and on dentin: SMP – 17.29 (4.25); SB – 18.2 (8.74); CSB – 16.13 (7.14); APL – 6.04 (3.35). The predominant failure mode was cohesive (primarily of the bonding agent). On enamel SBS was statistically similar for all four adhesives. On dentin SBS of APL was lower than the other tested adhesives.

The effect of the nanofilled adhesive systems on shear bond strength of all-ceramics to dentin

2015 ◽  
Vol 6 (2) ◽  
pp. 75
Author(s):  
Filiz Keyf ◽  
Sencan Ozlu ◽  
Tayfun Vural ◽  
EmirBaki Denkbas
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Adhesive Systems

Shear Bond Strength of Different Adhesive Systems in Amalgam Repair

2020 ◽  
Vol 52 (5) ◽  
pp. 805-811
Author(s):  
Ö. Erçin ◽  
F. Alkan ◽  
N. Arhun
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Adhesive Systems

scholarly journals Shear Strength of Brackets Bonded with Universal Adhesive Containing 10-MDP after 20,000 Thermal Cycles

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Mariana Almeida Mello Proença ◽  
Karime Tavares Lima da Silva ◽  
Alisson Costa e Silva ◽  
Edilausson Moreno Carvalho ◽  
José Bauer ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Dental Enamel ◽  
Adhesive System ◽  
Test Machine ◽  
Adhesive Systems ◽  
Thermal Cycles ◽  
Universal Adhesive ◽  
Adhesive Remnant Index ◽  
One Way Anova

Objectives. The aim of this study was to evaluate the shear bond strength of metal brackets bonded with different universal adhesive systems containing 10-MDP and Transbond Plus Self Etching Primer after 20,000 thermal cycles. Materials and Methods. A total of 130 sound bovine teeth were used, which are divided into 5 groups (n = 26) according to the adhesive system used: All-Bond Universal (Bisco), Ambar Universal (FGM), Clearfil Universal Bond (Kuraray), Single Bond Universal (3M/ESPE), and Transbond Plus SEP (3M/ESPE) as control. The adhesives were applied for 20 seconds and bonded with a resin Transbond XT (3M/ESPE). After this, the teeth were submitted to 20,000 cycles at 5°C and 55°C. Afterwards, the shear bond strength test was performed in a universal test machine (Instron 3342). The adhesive remnant index (ARI) was evaluated under a stereomicroscope at 10x magnification and scanning electronic microscopy (SEM, Hitachi 3030). The shear bond strength data were submitted to One-Way ANOVA (α = 0.05) and the ARI to the Kruskal–Wallis test (α = 0.05). Results. Statistical analysis showed that the universal adhesive systems presented mean shear bond strength values similar to Transbond Plus SEP (p<0.05). The universal adhesive presented similar ARI values among them but differed from those of Transbond Plus SEP (p<0.001). Transbond Plus SEP presented a high ARI value when compared with the universal adhesive systems and high demineralization of enamel. Conclusions. The results show that universal adhesive systems may be used for bonding metal brackets if the orthodontist wants to maintain dental enamel health.

Bond Strength Comparison of Orthodontic Bonding Systems: A Systematic Review

2019 ◽  
pp. 20-26
Author(s):  
Tubayesha Hassan ◽  
MH Sattar
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Dental Treatment ◽  
Enamel Surface ◽  
Adhesive Systems ◽  
Scientific Review ◽  
Bonding System ◽  
Etch And Rinse ◽  
Bonding Systems ◽  
Self Etch

As a means of regular practice in orthodontics and aesthetic dentistry, resin based adhesive systems are being used exclusively. Keeping up with the ever-increasing demand for aesthetic dental treatment all over the world, newer and more improved adhesive systems have been developed. However, regarding the comparison as to which bonding system performs better in clinical perspective, there is lack of existing scientific review articles. In this review, we tend to explore the conventional etch and rinse bonding system and the self-etch primer bonding system. The different tests to assess and compare bond strength between these two types of adhesives from various bibliography are discussed. The results of shear bond strength test, adhesive remnant index (ARI), enamel-adhesive interface using scanning electron microscope (SEM) and the effect of saliva contamination and time are discussed. Interestingly, each system has its strengths and weaknesses. In shear bond strength, self-etch bonding systems clearly exhibits less strength than conventional bonding systems. Resin tags into enamel surface are shorter in self-etch primer adhesives which results from milder etching to enamel compared to the conventional aid-etch and rinse adhesives. Contrarily, the irreversible changes to enamel surface is more aggressive in conventional acid-etching which states that self-etching systems are better according to the principles of minimal intervention dentistry. Ban J Orthod & Dentofac Orthop, April 2017; Vol-7 (1-2), P.20-26

scholarly journals Shear bond strength of fibre-reinforced composite nets using two different adhesive systems

2010 ◽  
Vol 33 (1) ◽  
pp. 66-70 ◽  
Author(s):  
M. F. Sfondrini ◽  
V. Cacciafesta ◽  
A. Scribante
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Adhesive Systems ◽  
Reinforced Composite
Sign in / Sign up

Export Citation Format

Share Document