scholarly journals Meshless particle modelling of free surface flow over spillways

2015 ◽  
Vol 18 (2) ◽  
pp. 354-370 ◽  
Author(s):  
Ehsan Jafari-Nodoushan ◽  
Khosrow Hosseini ◽  
Ahmad Shakibaeinia ◽  
Seyed-Farhad Mousavi
Keyword(s):  
Free Surface ◽  
Surface Profile ◽  
Particle Method ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Weakly Compressible ◽  
Wall Boundary Conditions ◽  
Free Surface Profile ◽  
Moving Particle ◽  
Lagrangian Particle Method

A meshless Lagrangian (particle) method based on the weakly compressible moving particle semi-implicit formulation (WC-MPS) is developed and analysed for simulation of flow over spillways. To improve the accuracy of the model for pressure and velocity calculation, some modifications are proposed and evaluated for the inflow and wall boundary conditions implementation methods. The final model is applied for simulation of flow over the 45° and 60° ogee spillways (with different inflow rates) and also shallow flow over a spillway-like curved bed channel. To evaluate the model, the numerical results of free surface profile and velocity and pressure field are compared with the available experimental measurements. Comparisons show the results’ accuracy of the developed model and proposed improvements. The results of this study will not only provide a reliable numerical tool for modelling of flow over spillways, but also provide an insight for better understating flow pattern over these hydraulic structures.

Free Surface Flow Profile and Fluctuations of a Circular Hydraulic Jump Formed by an Impinging Jet

1995 ◽  
Vol 117 (4) ◽  
pp. 677-682 ◽  
Author(s):  
J. W. Stevens
Keyword(s):  
Free Surface ◽  
Hydraulic Jump ◽  
Surface Profile ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Flow Profile ◽  
Flow Depth ◽  
Supercritical Flow ◽  
Jump Size ◽  
Free Surface Profile

A fine wire probe was used to make quantitative measurements of the free surface profile and surface fluctuations around the hydraulic jump formed by a normally impinging free liquid jet. Representative magnitudes of both radial and axial fluctuations were presented for two nozzle sizes and several jet Reynolds numbers and subcritical flow depths. The results were compared to previous measurements of the supercritical flow depth and to theoretical predictions of the circular hydraulic jump size. The agreement appeared reasonable for the supercritical flow depth while the analytical expressions predicted a shorter hydraulic jump than that found by the measurements for the same supercritical flow conditions.

Two-dimensional natural element analysis of double-free surface flow under a radial gate

2012 ◽  
Vol 39 (6) ◽  
pp. 643-653 ◽  
Author(s):  
Farhang Daneshmand ◽  
S.A. Samad Javanmard ◽  
Jan F. Adamowski ◽  
Tahereh Liaghat ◽  
Mohammad Mohsen Moshksar
Keyword(s):  
Free Surface ◽  
Surface Profile ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Element Analysis ◽  
Pressure Distributions ◽  
Free Surface Profile ◽  
Natural Element ◽  
Gravity Driven ◽  
Radial Gate

The gravity-driven free surface flow problems for which both the solid and free surface boundaries are highly curved are very difficult to solve. A computational scheme using a variable domain and a fixed domain natural element method (NEM) is developed in the present study for the computation of the free surface profile, velocity and pressure distributions, and the flow rate of a 2D gravity fluid flow through a conduit and under a radial gate. The problem involves two highly curved unknown free surfaces and arbitrary curved-shaped boundaries. These features make the problem more complicated than flow under a sluice gate or over a weir. The fluid is assumed to be inviscid and incompressible and the results obtained are confirmed by conducting a hydraulic model test. The results are in agreement with other flow solutions for free surface profiles and pressure distributions.

scholarly journals Free-surface flow due to a source submerged in a fluid of infinite depth with two stagnant regions

1993 ◽  
Vol 34 (3) ◽  
pp. 368-376 ◽  
Author(s):  
Hocine Mekias ◽  
Jean-Marc Vanden-Broeck
Keyword(s):  
Free Surface ◽  
Surface Profile ◽  
Free Surface Flow ◽  
Shear Layers ◽  
Free Surface Flows ◽  
Surface Flow ◽  
Surface Flows ◽  
Infinite Depth ◽  
Free Surface Profile ◽  
Series Truncation Method

AbstractTwo-dimensional free-surface flows produced by a submerged source in a fluid of infinite depth are considered. It is assumed that the point on the free surface just above the source is a stagnation point and that the fluid outside two shear layers is at rest. The free-surface profile and the shape of the shear layers are determined numerically by using a series-truncation method. It is shown that there is a solution for each value of the Froude number F > 0. When F tends to infinity, the flow also describes a thin jet impinging in a fluid at rest.

scholarly journals SPH Open Boundary Simulation of Free-Surface Flow Over Ogee-crested Spillway

2021 ◽  
Vol 28 (2) ◽  
pp. 137-151
Author(s):  
Rizgar Karim ◽  
Jowhar Mohammad
Keyword(s):  
Free Surface ◽  
Open Source ◽  
Water Surface ◽  
Surface Profile ◽  
Free Surface Flow ◽  
The United States ◽  
Surface Flow ◽  
Absolute Difference ◽  
Open Boundary ◽  
Water Surface Profile

This study was conducted to compare water surface profiles with standard ogeecrested spillways. Different methods were used, such as (experimental models, numerical models, and design nomographs for the United States Army Corps of Engineers, USACE). In accordance with the USACE specifications, three different models were constructed from rigid foam and then installed in a testing flume. The water surface profile has been recorded for these models with different design heads. For modeling the experimental model configurations, a numerical model based on the smoothed particle hydrodynamics (SPH) technique was used and is developed to simulate the water surface profile of the flow over the ogee-crested spillway. A 2D SPHysics open-source software has been used in this study, using the SPH formulation to model fluid flow, developing the SPH boundary procedure to handle open-boundary simulations, and modifying the open-source SPHysics code for this purpose. The maximum absolute difference between the measured and computed results of the water surface profile for all head ratios of (H/Hd), does not exceed 4.63% at the crest region, the numerical results for the water surface profile showed good agreement with the physical model results. The results obtained experimentally and numerically by SPH are compared with the CFD results in order to be more reassuring from the results. Additional comparisons were made using interpolated data from USACE, Waterways Experiment Station (WES), and design nomographs. The SPH technique is considered very promising and effective for free surface flow applications.

scholarly journals A physically consistent particle method for high-viscous free-surface flow calculation

2021 ◽  
Author(s):  
Masahiro Kondo ◽  
Takahiro Fujiwara ◽  
Issei Masaie ◽  
Junichi Matsumoto
Keyword(s):  
Angular Momentum ◽  
Free Surface ◽  
Particle Method ◽  
Free Surface Flow ◽  
Momentum Conservation ◽  
Free Surface Flows ◽  
Surface Flow ◽  
Particle Methods ◽  
Surface Flows ◽  
Angular Momentum Conservation

AbstractParticle methods for high-viscous free-surface flows are of great use to capture flow behaviors which are intermediate between solid and liquid. In general, it is important for numerical methods to satisfy the fundamental laws of physics such as the conservation laws of mass and momentum and the thermodynamic laws. Especially, the angular momentum conservation is necessary to calculate rotational motion of high-viscous objects. However, most of the particle methods do not satisfy the physical laws in their spatially discretized system. The angular momentum conservation law is broken mostly because of the viscosity models, which may result in physically strange behavior when high-viscous free-surface flow is calculated. In this study, a physically consistent particle method for high-viscous free-surface flows is developed. The present method was verified, and its performance was shown with calculating flow in a rotating circular pipe, high-viscous Taylor–Couette flow, and offset collision of a high-viscous object.

Sign in / Sign up

Export Citation Format

Share Document