Wastewater Treatment by a Submerged Contact Media Process Using Net Plates

1991 ◽  
Vol 23 (10-12) ◽  
pp. 1853-1862 ◽  
Author(s):  
T. Nambu ◽  
K. Kawarura ◽  
M. Kaneko
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Retention Time ◽  
Municipal Wastewater ◽  
Pilot Scale ◽  
Recycled Water ◽  
Operational Conditions ◽  
Treatment Performance ◽  
Conventional Activated Sludge ◽  
Treated Municipal Wastewater

Wastewater treatment by using a series of bioreactors with submerged net plates, on which microbial growths could be developed, was studied to evaluate its treatment performance and to find suitable operational conditions for sufficient BOD and nitrogen removal. A comprehensive experimental study was carried out by using a bench-scale plant which treated artificial wastewater and a pilot-scale plant which treated municipal wastewater. This process treated well the wastewater with higher pollutant loads in comparison with the conventional activated sludge process. The wastewater containing 200 mg BOD/l was reduced to 20 mg BOD/l at the high BOD loading of 1,94 kg/m3 day and the retention time less than 5 hours. Nitrogen removal could be explained well by an index defined as the product of the water temperature and the retention time. When the ratio, in flow rate, of recycled water to influent was 4 and the index was more than 400, nitrogen removal more than 80 % was obtained.

Kinetic Model of Sequencing Batch Activated Sludge Process for Municipal Wastewater Treatment

1991 ◽  
Vol 23 (4-6) ◽  
pp. 1097-1106 ◽  
Author(s):  
H. Nakazawa ◽  
K. Tanaka
Keyword(s):  
Wastewater Treatment ◽  
Kinetic Model ◽  
Activated Sludge ◽  
Mathematical Models ◽  
Municipal Wastewater ◽  
Pilot Scale ◽  
Activated Sludge Process ◽  
Municipal Wastewater Treatment ◽  
Operational Conditions ◽  
Aeration Time

Mathematical models based on the kinetic aspect of the sequencing batch activated sludge process were developed to explain the characteristics of the process treating municipal wastewater. These models are a steady-state model dealing with the overall relationship between biomass concentrations in a reactor and operational conditions of the process, and a kinetic model dealing with the behaviors of biomass and substrate in a reactor within one cycle time of the process. Applying these mathematical models for the results of pilot-scale experiments for municipal wastewater treatment, reasonable parameters' values were obtained and the effects of operating strategies including the aeration time ratio and the solids retention time became clear for the process performance.

Alternate anoxic/aerobic operation for nitrogen removal in a membrane bioreactor for municipal wastewater treatment

2011 ◽  
Vol 64 (8) ◽  
pp. 1730-1735 ◽  
Author(s):  
G. Guglielmi ◽  
G. Andreottola
Keyword(s):  
Wastewater Treatment ◽  
Energy Consumption ◽  
Nitrogen Removal ◽  
Membrane Bioreactor ◽  
Municipal Wastewater ◽  
Pilot Scale ◽  
Ammonia Nitrogen ◽  
Municipal Wastewater Treatment ◽  
Biological Phosphorus Removal ◽  
The Impact

A large pilot-scale membrane bioreactor (MBR) with a conventional denitrification/nitrification scheme for municipal wastewater treatment has been run for one year under two different aeration strategies in the oxidation/nitrification compartment. During the first five months air supply was provided according to the dissolved-oxygen set-point and the system run as a conventional pre-denitrification MBR; then, an intermittent aeration strategy based on effluent ammonia nitrogen was adopted in the aerobic compartment in order to assess the impact on process performances in terms of N and P removal, energy consumption and sludge reduction. The experimental inferences show a significant improvement of the effluent quality as COD and total nitrogen, both due to a better utilization of the denitrification potential which is a function of the available electron donor (biodegradable COD) and electron acceptor (nitric nitrogen); particularly, nitrogen removal increased from 67% to 75%. At the same time, a more effective biological phosphorus removal was observed as a consequence of better selection of denitrifying phosphorus accumulating organisms (dPAO). The longer duration of anoxic phases also reflected in a lower excess sludge production (12% decrease) compared with the standard pre-denitrification operation and in a decrease of energy consumption for oxygen supply (about 50%).

The nitrogen removal potential of predenitrification systems in sensitive coastal areas

1995 ◽  
Vol 32 (7) ◽  
pp. 135-142
Author(s):  
E. Görgün ◽  
N. Artan ◽  
D. Orhon ◽  
R. Tasli
Keyword(s):  
Water Quality ◽  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Retention Time ◽  
Treatment Process ◽  
Hydraulic Retention Time ◽  
Domestic Sewage ◽  
Coastal Areas ◽  
Careful Evaluation ◽  
Denitrification Kinetics

Effective nitrogen removal is now required to protect water quality in sensitive coastal areas. This involves a much more difficult treatment process than for conventional domestic sewage as wastewater quantity and quality exhibits severe fluctuations in touristic zones. Activated sludge is currently the most widely used wastewater treatment and may be upgraded as a predenitrification system for nitrogen removal. Interpretation of nitrification and denitrification kinetics reveal a number of useful correlations between significant parameters such as sludge age, C/N ratio, hydraulic retention time, total influent COD. Nitrogen removal potential of predenitrification may be optimized by careful evaluation of wastewater character and the kinetic correlations.

Characteristics of nitrogen removal and microbial distribution by application of spent sulfidic caustic in pilot scale wastewater treatment plant

2010 ◽  
Vol 62 (8) ◽  
pp. 1965-1965
Author(s):  
S. Park ◽  
J. Lee ◽  
J. Park ◽  
I. Byun ◽  
T. Park ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Pilot Scale ◽  
Microbial Distribution ◽  
Spent Sulfidic Caustic ◽  
Sulfidic Caustic

Publisher‘s note. We regret that the published version of this article erroneously denoted the first author as corresponding author; in fact the formal corresponding author of this paper is Professor Taeho Lee, whose address is repeated below.

Bulking and Foaming Organism Control at Phoenix, AZ WWTP

1992 ◽  
Vol 26 (3-4) ◽  
pp. 461-472 ◽  
Author(s):  
O. E. Albertson ◽  
P. Hendricks
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Retention Time ◽  
Oxygen Transfer ◽  
Average Rate ◽  
Oxygen Transfer Efficiency ◽  
Solids Retention ◽  
Total Nitrogen Removal ◽  
The Cost ◽  
The City

A 1630 L/s activated sludge plant at Phoenix was limited to an average rate of 1050 L/s and operated, at 400-600 mg/L MLSS and 0.8-1.3 day solids retention time (SRT) due to bulking sludge and limited clarification capacity. Higher SRTs also produced uncontrolled Nocardia foaming and low dissolved oxygen due to partial nitrification. The City retained the services of a team of consultants to resolve these problems as well as to upgrade the plant to provide nitrification and total nitrogen removal. An anoxic selector design was implemented within the existing basin and the clarifiers were modified to improve inlet design and sludge transport. The modified advanced wastewater treatment (AWT) plant operating at 1450 L/s has averaged an effluent of 7.6 mg/L BOD5, 8.2 mg/L TSS, 1.3 mg/L NH4N, 4.1 mg/L NO3N and 2.9 mg/L TP. Oxygen transfer efficiency has increased about 80% in the nitrification-denitrification (NdeN) mode. The cost of modification/upgrading to AWT was approximately $730,000 and a 400 L/s increase in hydraulic capacity was realized. Upgrading costs were $5.63/m3 ($0.02/gal.)

Sign in / Sign up

Export Citation Format

Share Document