Urban Drainage Systems: Design and Operation

1993 ◽  
Vol 27 (12) ◽  
pp. 31-70 ◽  
Author(s):  
J. Marsalek ◽  
T. O. Barnwell ◽  
W. Geiger ◽  
M. Grottker ◽  
W. C. Huber ◽  
...  
Keyword(s):  
Sewage Treatment ◽  
Systems Design ◽  
Urban Drainage ◽  
Sewer System ◽  
Drainage Systems ◽  
Planning And Design ◽  
Sewer Systems ◽  
Combined Sewer ◽  
Urban Drainage Systems ◽  
Receiving Waters

Design and operation of urban drainage systems are addressed in the context of the urban water system comprising drainage, sewage treatment plants and receiving waters. The planning and design of storm sewers are reviewed with reference to planning objectives, design objectives, flows and pollutant loads, sewer system structures and urban runoff control and treatment. The discussion of combined sewers focuses on hydraulic design of combined sewer systems, including combined sewer overflow (CSO) structures, and the use of CSO structures and storage in control of CSOs. The section on operation of sewer systems focuses on real time control, its feasibility, planning, design, operation and applications. Sewer system planning and design are generally conducted using computer modelling tools and procedures which are reviewed in the last section. A brief listing of selected models focuses on internationally used models. Finally, it was concluded that further improvements in environmental and ecological protection of urban waters is feasible only by consideration of urban drainage systems in conjunctions with sewage treatment and water quality in the receiving waters.

scholarly journals Attribute-based intervention development for increasing resilience of urban drainage systems

2018 ◽  
Vol 77 (6) ◽  
pp. 1757-1764 ◽  
Author(s):  
Chris Sweetapple ◽  
Guangtao Fu ◽  
Raziyeh Farmani ◽  
Fanlin Meng ◽  
Sarah Ward ◽  
...  
Keyword(s):  
Case Studies ◽  
Distributed Storage ◽  
Intervention Development ◽  
Urban Drainage ◽  
System Failure ◽  
Sewer System ◽  
Drainage Systems ◽  
Combined Sewer ◽  
Urban Drainage Systems ◽  
Combined Sewer System

Abstract Resilience building commonly focuses on attributes such as redundancy. Whilst this may be effective in some cases, provision of specific attributes does not guarantee resilient performance and research is required to determine the suitability of such approaches. This study uses 250 combined sewer system virtual case studies to explore the effects of two attribute-based interventions (increasing distributed storage and reducing imperviousness) on performance-based resilience measures. These are found to provide improvement in performance under system failure in the majority of case studies, but it is also shown that attribute-based intervention development can result in reduced resilience.

Performance assessment of separate and combined sewer systems in metropolitan areas in southern China

2013 ◽  
Vol 69 (2) ◽  
pp. 422-429 ◽  
Author(s):  
Tian Li ◽  
Wei Zhang ◽  
Cang Feng ◽  
Jun Shen
Keyword(s):  
Performance Assessment ◽  
Metropolitan Areas ◽  
Southern China ◽  
Drainage System ◽  
Practical Experience ◽  
Urban Drainage ◽  
Drainage Systems ◽  
Sewer Systems ◽  
Combined Sewer ◽  
Urban Drainage Systems

To assess the performance of urban drainage systems in metropolitan areas in southern China, 12 urban drainage systems, including nine separate sewer systems (SSSs) and three combined sewer systems (CSSs) were monitored from 2008 to 2012 in Shanghai and Hefei. Illicit connection rates of SSS were determined. The results indicate that serious illicit connections exist for most SSSs. Annual volume balance for two SSSs with serious illicit connection was assessed with a hydraulic model to determine the dry weather overflow volume. Although interception facilities have been implemented in SSSs, for some systems with serious illicit connections, a considerable volume of dry weather overflow still existed. Combined with monitoring of dry/wet weather flow quality, the pollutant load caused by wet/dry weather overflow was quantified. The results revealed that there was no obvious advantage of having SSSs over CSSs in terms of pollutant control. The serious pollution caused by illicit connections and insufficient management occurs in many cities in China. The performance assessment of separate and CSSs in Shanghai and Hefei provides important lessons and practical experience that can be applied to the construction and management of urban drainage system in China as well as other developing countries.

Nowcasting of rainfall and of combined sewage flow in urban drainage systems

2009 ◽  
Vol 59 (6) ◽  
pp. 1145-1151 ◽  
Author(s):  
Stefan Achleitner ◽  
Stefan Fach ◽  
Thomas Einfalt ◽  
Wolfgang Rauch
Keyword(s):  
Spatial Scales ◽  
Radar Data ◽  
Urban Drainage ◽  
Real Time Control ◽  
Sewer System ◽  
Drainage Systems ◽  
Time Control ◽  
Sewer Systems ◽  
Urban Drainage Systems ◽  
The City

Nowcasting of rainfall may be used additionally to online rain measurements to optimize the operation of urban drainage systems. Uncertainties quoted for the rain volume are in the range of 5% to 10% mean square error (MSE), where for rain intensities 45% to 75% MSE are noted. For larger forecast periods up to 3 hours, the uncertainties will increase up to some hundred percents. Combined with the growing number of real time control concepts in sewer systems, rainfall forecast is used more and more in urban drainage systems. Therefore it is of interest how the uncertainties influence the final evaluation of a defined objective function. Uncertainty levels associated with the forecast itself are not necessarily transferable to resulting uncertainties in the catchment's flow dynamics. The aim of this paper is to analyse forecasts of rainfall and specific sewer output variables. For this study the combined sewer system of the city of Linz in the northern part of Austria located on the Danube has been selected. The city itself represents a total area of 96 km2 with 39 municipalities connected. It was found that the available weather radar data leads to large deviations in the forecast for precipitation at forecast horizons larger than 90 minutes. The same is true for sewer variables such a CSO overflow for small sub-catchments. Although the results improve for larger spatial scales, acceptable levels at forecast horizons larger than 90 minutes are not reached.

Parallel computing in conceptual sewer simulations

2010 ◽  
Vol 61 (2) ◽  
pp. 283-291 ◽  
Author(s):  
G. Burger ◽  
S. Fach ◽  
H. Kinzel ◽  
W. Rauch
Keyword(s):  
Parallel Computing ◽  
Software Tool ◽  
Computational Time ◽  
Limiting Factor ◽  
Urban Drainage ◽  
Pollution Effects ◽  
Drainage Systems ◽  
Sewer Systems ◽  
Urban Drainage Systems

Integrated urban drainage modelling is used to analyze how existing urban drainage systems respond to particular conditions. Based on these integrated models, researchers and engineers are able to e.g. estimate long-term pollution effects, optimize the behaviour of a system by comparing impacts of different measures on the desired target value or get new insights on systems interactions. Although the use of simplified conceptual models reduces the computational time significantly, searching the enormous vector space that is given by comparing different measures or that the input parameters span, leads to the fact, that computational time is still a limiting factor. Owing to the stagnation of single thread performance in computers and the rising number of cores one needs to adapt algorithms to the parallel nature of the new CPUs to fully utilize the available computing power. In this work a new developed software tool named CD3 for parallel computing in integrated urban drainage systems is introduced. From three investigated parallel strategies two showed promising results and one results in a speedup of up to 4.2 on an eight-way hyperthreaded quad core CPU and shows even for all investigated sewer systems significant run-time reductions.

A planning framework for sustainable urban drainage systems

Water Policy ◽  
2012 ◽  
Vol 14 (5) ◽  
pp. 865-886 ◽  
Author(s):  
Ole Fryd ◽  
Torben Dam ◽  
Marina Bergen Jensen
Keyword(s):  
Urban Drainage ◽  
Integrated Planning ◽  
Drainage Systems ◽  
Spatial Strategies ◽  
Planning And Design ◽  
Time Space ◽  
Planning Framework ◽  
The Social ◽  
Biophysical Processes ◽  
Urban Drainage Systems

Sustainable urban drainage systems (SUDS) call for collaborative and interdisciplinary practices. The problem with this is the social and technical complexities involved, and the absence of a shared understanding of the challenge and the scope of integrated solutions. It is necessary to clarify the contributions and interactions between disciplines in order to achieve integrated planning and design of SUDS. This paper reviews the literature across disciplinary fields and outlines key messages and uncertainties within each discipline. The outcome is a framework comprising time, space and human values, as well as biophysical processes (e.g. engineering), spatial strategies (e.g. urban design) and adaptive strategies (e.g. management). It identifies the planning of SUDS as a collective learning process with continuous iterations between disciplines, while also reflecting the past, present and future of a specific site.

A stochastic approach for automatic generation of urban drainage systems

2009 ◽  
Vol 59 (6) ◽  
pp. 1137-1143 ◽  
Author(s):  
M. Möderl ◽  
D. Butler ◽  
W. Rauch
Keyword(s):  
Case Studies ◽  
Real World ◽  
Drainage System ◽  
Stochastic Approach ◽  
Automatic Generation ◽  
Urban Drainage ◽  
Sewer System ◽  
Urban Drainage System ◽  
Drainage Systems ◽  
Urban Drainage Systems

Typically, performance evaluation of new developed methodologies is based on one or more case studies. The investigation of multiple real world case studies is tedious and time consuming. Moreover extrapolating conclusions from individual investigations to a general basis is arguable and sometimes even wrong. In this article a stochastic approach is presented to evaluate new developed methodologies on a broader basis. For the approach the Matlab-tool “Case Study Generator” is developed which generates a variety of different virtual urban drainage systems automatically using boundary conditions e.g. length of urban drainage system, slope of catchment surface, etc. as input. The layout of the sewer system is based on an adapted Galton-Watson branching process. The sub catchments are allocated considering a digital terrain model. Sewer system components are designed according to standard values. In total, 10,000 different virtual case studies of urban drainage system are generated and simulated. Consequently, simulation results are evaluated using a performance indicator for surface flooding. Comparison between results of the virtual and two real world case studies indicates the promise of the method. The novelty of the approach is that it is possible to get more general conclusions in contrast to traditional evaluations with few case studies.

Sign in / Sign up

Export Citation Format

Share Document