Optimisation and control of the inflow to a wastewater treatment plant using integrated modelling tools

1998 ◽  
Vol 37 (1) ◽  
pp. 347-354 ◽  
Author(s):  
Ole Mark ◽  
Claes Hernebring ◽  
Peter Magnusson
Keyword(s):  
Wastewater Treatment ◽  
Real Time ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Pilot Project ◽  
Integrated Modelling ◽  
Real Time Control ◽  
Sewer System ◽  
Time Control ◽  
The Impact

The present paper describes the Helsingborg Pilot Project, a part of the Technology Validation Project: “Integrated Wastewater” (TVP) under the EU Innovation Programme. The objective of the Helsingborg Pilot Project is to demonstrate implementation of integrated tools for the simulation of the sewer system and the wastewater treatment plant (WWTP), both in the analyses and the operational phases. The paper deals with the programme for investigating the impact of real time control (RTC) on the performance of the sewer system and wastewater treatment plant. As the project still is in a very early phase, this paper focuses on the modelling of the transport of pollutants and the evaluation of the effect on the sediment deposition pattern from the implementation of real time control in the sewer system.

Interaction between the treatment plant and the sewer system in Halmstad: integrated upgrading based on real time control

1998 ◽  
Vol 37 (9) ◽  
pp. 127-134
Author(s):  
C. Hernebring ◽  
L. Ohlsson ◽  
M. Andreasson ◽  
L.-G. Gustafsson
Keyword(s):  
Wastewater Treatment ◽  
Real Time ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Rehabilitation Program ◽  
Real Time Control ◽  
Sewer System ◽  
Time Control ◽  
Flow Control Devices ◽  
Effective Use

In Halmstad, Sweden great efforts have been made during the 1990's to improve the functionality and to reduce the environmental impact of the sewer system and the wastewater treatment plant. The investment and rehabilitation program includes to a great extent an effective use of existing resources. The wastewater treatment plant is reconstructed to meet increased nutrient removal demands. A five year rehabilitation plan for the sewer system is under completion, where the measures mainly are motivated by the aim to reduce the combined sewer overflow volumes and to minimize the risk of local flooding. It was soon realized that an integrated use of storage volumes at the wastewater treatment plant and within the sewer system could improve the general conditions for the treatment at the plant. To implement this strategy a real time control system was introduced by installing controllable weirs and flow control devices in the main sewer. The article describes the background of the sewerage master plan, how the upgrading work has been carried out by means of simulations and measurement, gives examples of some expected potential benefits, and outlines plans for the future.

Model reduction through boundary relocation to facilitate real-time control optimisation in the integrated urban wastewater system

2002 ◽  
Vol 45 (4-5) ◽  
pp. 373-381 ◽  
Author(s):  
J. Meirlaen ◽  
P.A. Vanrolleghem
Keyword(s):  
Water Quality ◽  
Model Reduction ◽  
Real Time ◽  
Treatment Plant ◽  
Model Complexity ◽  
Urban Wastewater ◽  
Real Time Control ◽  
Sewer System ◽  
Time Control ◽  
The Impact

Real time control is one of the possibilities to minimise the impact of the integrated urban wastewater system (sewer system and treatment plant) on the receiving water quality. Integrated control uses information about the river state to act in the sewer system or in treatment plant. In order to test and tune these integrated controllers, a simplified integrated model is needed. Even with these simplified models, the simulation times may be too long and further model reduction is needed. In this paper, dependency-structure based model reduction is proposed as a technique to further reduce model complexity. Three steps are proposed: relocation of the upstream system boundaries to just upstream of the first control point, relocation of the downstream boundaries to just downstream of the last measurement point, and third, a further model simplification based on an analysis of the sensitivity of the control actions on submodel elimination. The effect of applying the different reduction approaches on the control strategy and on the resulting river water quality is discussed on the basis of a case study of the catchment of Tielt.

EVALUATION OF MODELLING TECHNIQUES FOR WASTEWATER TREATMENT PLANT AUTOMATION

1994 ◽  
Vol 30 (2) ◽  
pp. 149-156 ◽  
Author(s):  
Andrea G. Capodaglio
Keyword(s):  
Wastewater Treatment ◽  
Real Time ◽  
Wastewater Treatment Plant ◽  
Dynamic Properties ◽  
Treatment Plant ◽  
Real Time Control ◽  
Full Account ◽  
Time Control ◽  
Modelling Techniques ◽  
Plant Automation

Wastewater treatment plant automation and real-time control have become important topics of research and development. Real-time control is nowadays considered a desirable goal for medium- to large-sized utilities for attaining better treatment efficiencies and improved compliance with discharge permit limitations. For an efficient implementation, real-time control must be supported by adequate modelling methodologies that take into full account the dynamic properties of the treatment system. This paper evaluates the requirements of such applications and the properties of available modelling approaches. Some applications examples are discussed.

Integrated modelling: comparison of state variables, processes and parameters in sewer and wastewater treatment plant models

1997 ◽  
Vol 36 (5) ◽  
pp. 373-380 ◽  
Author(s):  
C. Fronteau ◽  
W. Bauwens ◽  
P.A. Vanrolleghem
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Drainage System ◽  
Integrated Modelling ◽  
Urban Drainage ◽  
State Variables ◽  
Sewer System ◽  
Wastewater Treatment Process ◽  
Urban Drainage System

All the parts of an urban drainage system, i.e. the sewer system, the wastewater treatment plant (WWTP) and the river, should be integrated into one single model to assess the performance of the overall system and for the development of design and control strategies assisting in its sustainable and cost effective management. Existing models for the individual components of the system have to be merged in order to develop the integrated tool. One of the problems arising from this methodology is the incompatibility of state variables, processes and parameters used in the different modelling approaches. Optimisation of an urban drainage system, and of the wastewater treatment process in particular, requires a good knowledge of the wastewater composition. As important transformations take place between the emission from the household and the arrival at the treatment facility, sewer models should include these transformations in the sewer system. At present, however, research is still needed in order to increase our knowledge of these in-sewer processes. A comparison of the state variables, processes and parameters has been carried out in both sewer models (SMs) and activated sludge models (ASMs). An ASM approach is used for the description of reactions in sewer models. However, a difference is found in the expression for organic material (expressed in terms of BOD) and heterotrophic biomass is absent as a state variable, resulting in differences in processes and parameters. Reconciliation of both the models seems worthwhile and a preliminary solution is suggested in this paper.

Effects of real time control of sewer systems on treatment plant performance and receiving water quality

2002 ◽  
Vol 45 (3) ◽  
pp. 229-237 ◽  
Author(s):  
T. Frehmann ◽  
A. Niemann ◽  
P. Ustohal ◽  
W.F. Geiger
Keyword(s):  
Real Time ◽  
Treatment Plant ◽  
Drainage System ◽  
Control Measures ◽  
Plant Performance ◽  
Integral Model ◽  
Real Time Control ◽  
Time Control ◽  
The Impact ◽  
Receiving Water

Four individual mathematical submodels simulating different subsystems of urban drainage were intercoupled to an integral model. The submodels (for surface runoff, flow in sewer system, wastewater treatment plant and receiving water) were calibrated on the basis of field data measured in an existing urban catchment investigation. Three different strategies for controlling the discharge in the sewer network were defined and implemented in the integral model. The impact of these control measures was quantified by representative immission state-parameters of the receiving water. The results reveal that the effect of a control measure may be ambivalent, depending on the referred component of a complex drainage system. Furthermore, it is demonstrated that the drainage system in the catchment investigation can be considerably optimised towards environmental protection and operation efficiency if an appropriate real time control on the integral scale is applied.

Astlingen – a benchmark for real time control (RTC)

2018 ◽  
Vol 2017 (2) ◽  
pp. 552-560 ◽  
Author(s):  
Manfred Schütze ◽  
Maja Lange ◽  
Michael Pabst ◽  
Ulrich Haas
Keyword(s):  
Real Time ◽  
Preliminary Analysis ◽  
Control Strategies ◽  
Treatment Plant ◽  
Drainage System ◽  
Real Time Control ◽  
Sewer System ◽  
Time Control ◽  
System 2 ◽  
Water Association

Abstract This contribution serves two purposes. (1) It presents an updated version of the Astlingen example developed by the working group ‘Integral Real Time Control’ of the German Water Association (DWA), which serves as a benchmark example for the setup and evaluation of real time control strategies. As this benchmark is also intended for educational use, it demonstrates a simple RTC algorithm, illustrating the main concepts of RTC of drainage system. (2) The paper also encourages the preliminary analysis of the potential feasibility and benefit of a temporal increase of inflow to the wastewater treatment plant (WWTP) before analysing the WWTP behaviour in detail. For the present example, RTC within the sewer system alone led to almost the same reduction of overflow volume as permitting the inflow to the WWTP to be increased for 6 h within any 24 h, if at all permitted.

Integrated modelling of sewer system and wastewater treatment plant for investigating the impacts of chemical dosing in sewers

2012 ◽  
Vol 65 (8) ◽  
pp. 1399-1405 ◽  
Author(s):  
K. R. Sharma ◽  
S. Corrie ◽  
Z. Yuan
Keyword(s):  
Wastewater Treatment ◽  
Hydrogen Sulfide ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Integrated Modelling ◽  
Sewer System ◽  
Sewer Network ◽  
Modelling Methodology ◽  
P Removal

Chemicals are often dosed to control the production and accumulation of hydrogen sulfide in sewers. The biological and/or chemical actions of these chemicals have profound impacts on the composition of wastewater entering a WWTP, thereby affecting its performance. In this paper, an integrated modelling methodology for simultaneously investigating the effects of dosing of chemicals in sewer network and N and P removal at the downstream WWTP is reported. The sewer system is modelled using a sewer model (SeweX), and the WWTP is modelled using ASM2d model with some modifications. The importance of integrated modelling in sewer management is also demonstrated.

Sign in / Sign up

Export Citation Format

Share Document