Combination of coagulation and catalytic wet oxidation for the treatment of pulp and paper mill effluents

2001 ◽  
Vol 44 (5) ◽  
pp. 145-152 ◽  
Author(s):  
S. Verenich ◽  
A. Laari ◽  
M. Nissen ◽  
J. Kallas
Keyword(s):  
Paper Mill ◽  
Thermomechanical Pulp ◽  
Wet Oxidation ◽  
Pulp And Paper Mill ◽  
Catalytic Wet Oxidation ◽  
Paper Mills ◽  
Paper Mill Effluents ◽  
Suitable Combination ◽  
Chemical Sludge ◽  
Positive Effect

Wet oxidation (WO) is a well established process for purification of concentrated municipal and industrial wastewaters. Many attempts have been made to modify the WO process or to create a suitable combination of processes. This work was undertaken to investigate wet oxidation integrated with coagulation, i.e. to treat the sludge remaining after coagulation with a WO process. The possibility of regeneration of the used coagulant was also considered. Two waters from paper mills were used: TMP (thermomechanical pulp) circulation water and membrane concentrate. About 50% of the COD in the original water can be removed by coagulation using Fe2(SO4)3. The results from the wet oxidation experiments show the positive effect of iron in the chemical sludge as a catalyst. The efficiency of the WO process was enhanced almost by 100%. The remaining dissolved organic matter can be easily removed biologically.

scholarly journals A review on bioremediation of pulp and paper mill effluent – An alternative to conventional remedial technologies

2018 ◽  
Vol 10 (1) ◽  
pp. 367-374 ◽  
Author(s):  
Sangeeta Madan ◽  
Preeti Sachan ◽  
Utkarsh Singh
Keyword(s):  
Biological Treatment ◽  
Oxygen Demand ◽  
Paper Mill ◽  
Pulp And Paper ◽  
Residual Effects ◽  
Organic Load ◽  
Pulp And Paper Mill ◽  
Paper Mills ◽  
Paper Mill Effluent ◽  
Paper Mill Effluents

At present, a large amount of water required for paper production and various chemicals has been identified in effluents, which is produced at different steps of paper making in paper mills. The pulp and paper industry is typically related to pollution difficulties related to high biological oxygen demand (BOD), chemical oxygen demand (COD), colour, suspended solids, lignin and chlorinated compounds. Several studies have been made on eliminate these difficulties of pulp and paper effluents, the problem still continues. Although the physical and chemical methods are on the track of treatment, they are not on par with biological treatment because of cost ineffectiveness and residual effects. The biological treatment is known to be effective in reducing the organic load and toxic effects of paper mill effluents. Some microorganisms including bacteria and fungi have been involved in degrading the chemicals present in pulp and paper mill effluent. This article is an overview of the attempts made by several researchers worldwide to use biotechnological methods for degradation of the toxic compounds present in pulp and paper mill effluents by using fungi, bacteria, algae and enzymes. The current study clearly shows that application of native dominant bacterial and fungal isolates may be used forthe treatment of large pulp and paper mills effluents.

scholarly journals Integral indices for quality assessment of pulp and paper mill effluents

2014 ◽  
Vol 33 (1) ◽  
Author(s):  
Konstantin Bogolitsyn ◽  
Maria Gusakova ◽  
Nina Samsonova ◽  
Natalia Selivanova ◽  
Alexsandra Pochtovalova
Keyword(s):  
Oxygen Demand ◽  
Paper Mill ◽  
Pulp And Paper ◽  
Complex Nature ◽  
Pulp And Paper Mill ◽  
Pulp And Paper Mills ◽  
Paper Mills ◽  
Paper Mill Effluents ◽  
Northwest Region ◽  
Qualitative And Quantitative Characteristics

AbstractThe first part of this investigation studied complex nature of chemical oxygen demand (COD ) parameter on local and overall effluents, which were obtained from two pulp and paper mills, located in the Northwest region of Russia. Contribution of individual compounds and fractions of matters having different chemical nature to COD for these effluents was established. The second part of this study shows that, qualitative and quantitative characteristics of priority pollutants and their contribution to COD for different pulp and paper mills are not the same, though these mills use similar technologies and produce similar products.

Practical experiences with aerobic biofilters in TMP (thermomechanical pulping), sulfite and fine paper mills in Canada

1997 ◽  
Vol 35 (2-3) ◽  
pp. 227-234 ◽  
Author(s):  
A. Kantardjieff ◽  
J. P. Jones
Keyword(s):  
Pilot Plant ◽  
Pulp Mill ◽  
Paper Mill ◽  
Pulp And Paper ◽  
Full Scale ◽  
Pulp And Paper Mill ◽  
Paper Mills ◽  
Paper Mill Effluents ◽  
Sulfite Pulp ◽  
Practical Experiences

An industrial aerobic biofilter technology has been piloted extensively in Canada on several types of pulp and paper mill effluents, resulting in one full scale operational facility at one Canadian fine paper mill. In addition two industrial scale pilot plant tests were performed with the same technology, one in an integrated sulfite pulp and paper mill and one in a TMP mill. In the case of the fine paper mill, the full scale plant has two cells (8 m × 8 m × 6 m height of the media) and treats an unclarified but screened effluent with a loading of 3500 kg BOD/d. The system produces low quantities of biosludge (0.28 kg TSS/kg BOD removed), has a rapid rate of recovery after shock loadings and is very energy efficient (150 kW installed power for aeration). Pilot plant treatability studies were performed at one integrated Canadian sulfite mill using a combination of a biofilter-aerated lagoon system. The biofilter treated the most concentrated stream (sulfite pulp mill effluent) and this stream was then combined with the remaining wastewaters of the mill and polished in an aerated stabilization basin (ASB). The high quality ASB effluent (50 mg BOD/L/30 mg TSS/L) was non toxic to rainbow trout, Daphnia magna and photoluminescent bacteria. Integrated TMP mill effluents were treated in a 5 m3 aerobic biofilter filled with two types of media (10 to 20 mm and 20 to 30 mm). Under average loading conditions of 3.5 kg BOD/d.m3 media, the system produced effluents meeting regulation limits for BOD, TSS as well as for toxicity.

Anaerobic treatment of pulp and paper mill effluents – status quo and new developments

2007 ◽  
Vol 55 (6) ◽  
pp. 223-230 ◽  
Author(s):  
Leo Habets ◽  
Willie Driessen
Keyword(s):  
Paper Industry ◽  
Industrial Effluents ◽  
Paper Mill ◽  
Anaerobic Treatment ◽  
Pulp And Paper ◽  
Pulp And Paper Mill ◽  
Widespread Application ◽  
Paper Mills ◽  
Paper Mill Effluents ◽  
Pre Treatment

Since the early 1980s, anaerobic treatment of industrial effluents has found widespread application in the pulp and paper industry. Over 200 installations are treating a large variety of different pulp and paper mill effluents. Amongst various anaerobic systems the UASB and IC are the most applied anaerobic reactor systems. Anaerobic treatment is well feasible for effluents originated from recycle paper mills, mechanical pulping (peroxide bleached), semi-chemical pulping and sulphite and kraft evaporator condensates. The advantages of anaerobic pre-treatment are (1) net production of renewable energy (biogas), (2) minimized bio-solids production, (3) minimal footprint and (4) reduced emission of greenhouse gases. Via in-line application of anaerobic treatment in closed circuits (paper kidney technology) further savings on cost of fresh water intake and effluent discharge levies are generated.

Studies on the toxicity of pulp and paper mill effluents—I. Mutagenicity of the sediment samples derived from Kraft paper mills

1981 ◽  
Vol 15 (1) ◽  
pp. 17-24 ◽  
Author(s):  
N KINAE ◽  
T HASHIZUME ◽  
T MAKITA ◽  
I TOMITA ◽  
I KIMURA ◽  
...  
Keyword(s):  
Paper Mill ◽  
Pulp And Paper ◽  
Pulp And Paper Mill ◽  
Paper Mills ◽  
Sediment Samples ◽  
Paper Mill Effluents ◽  
Kraft Paper

The Benefits of Biotreatment for Reducing the Effects of Pulp and Paper Mill Effluents on Fish Reproduction in Laboratory Tests

2008 ◽  
Vol 43 (2-3) ◽  
pp. 161-171 ◽  
Author(s):  
Pierre Martel ◽  
Tibor Kovacs ◽  
Virginie Bérubé
Keyword(s):  
Laboratory Tests ◽  
Egg Production ◽  
Pimephales Promelas ◽  
Paper Mill ◽  
Pulp And Paper ◽  
Reproductive Capacity ◽  
Fish Reproduction ◽  
Pulp And Paper Mill ◽  
Paper Mill Effluents ◽  
Gonad Size

Abstract Pulp and paper mill effluents have been reported to cause changes in reproductive indicators of fish in laboratory and field studies. These changes include reduced egg production and gonad size, and altered hormone levels and expression of secondary sex characteristics. We examined the performance of biotreatment plants for their potential in abating effects of pulp and paper mill effluents on fish reproduction under laboratory conditions. A bleached kraft mill effluent (BKME) treated in an aerated lagoon and a thermomechanical pulp mill effluent (TMPE) treated by aerobic sludge in a sequential batch reactor were selected for study. Mature fathead minnows (Pimephales promelas) were exposed to effluents before and after biotreatment under continuous renewal conditions for 21 days. Egg production was monitored daily, while morphometric parameters (length, weight, gonad size), secondary sexual characteristics, and steroid hormone and vitellogenin levels were measured at the end of the effluent exposure. The effluent from both mills before biotreatment impaired the reproductive capacity of minnows (egg production) at concentrations of 10 and 20% vol/vol, but not at 2% vol/vol. Exposure to biotreated effluents from both mills at concentrations of 2, 10, 20, and 40% vol/vol caused no significant differences in overall reproductive capacity of minnows as compared with controls. These results indicate that biotreatment can significantly improve the quality of a BKME and an effluent from a TMP mill with respect to the reproductive capacity of fish as determined in laboratory tests.

Mutagenicity in Pulp and Paper Mill Effluents and in Recipient

1988 ◽  
Vol 20 (2) ◽  
pp. 143-152 ◽  
Author(s):  
A. Langi ◽  
M. Priha
Keyword(s):  
Activated Sludge ◽  
Mutagenic Activity ◽  
Chinese Hamster Ovary Cells ◽  
Chinese Hamster ◽  
Paper Mill ◽  
Pulp And Paper ◽  
Pulp And Paper Mill ◽  
Sludge Treatment ◽  
Paper Mill Effluents ◽  
Kraft Mill

The mutagenic properties of pulp and paper mill effluents were studied in three mills: bleached kraft mill with aerated lagoon treatment (Mill 1), bleached kraft mill with activated sludge treatment (Mill 2) and mechanical pulp/paper mill (Mill 3). Both treated and untreated effluents, process streams and molecular fractions were tested for mutagenicity (Ames test. Salmonella typhimurium TA100 and SCE sister chromatid exchange test, Chinese hamster ovary cells). To verify the potential environmental effects the mutagenic activity of concentrated recipient lake water (Mill 2) was also studied. The Ames mutagenicity of the bleached kraft mill effluent (BKME) originated from the first chlorination filtrate, SCE mutagenicity also occurred in the alkali extraction stage filtrate (Mill 1). No Ames mutagenicity was detected in the paper mill effluent, but it was SCE mutagenic. Activated sludge treatment of BKME removed both Ames and SCE mutagenicity, but the aerated lagoon treated BKME was still SCE mutagenic. No mutagenic activity was detected in the recipient water concentrates.

Sign in / Sign up

Export Citation Format

Share Document