Climbing the ladder: a step by step approach to international guidelines for water recycling

2001 ◽  
Vol 43 (10) ◽  
pp. 1-8 ◽  
Author(s):  
J. Anderson ◽  
A. Adin ◽  
J. Crook ◽  
C. Davis ◽  
R. Hultquist ◽  
...  

Given the pressures on the world's freshwater resources, recycled water is a valuable resource. Recycled water can increase the reliability of water supply because it is an independent source of water. Water recycling requires effective measures to protect public health and the environment. In the absence of comprehensive international guidelines, different countries have developed different approaches to managing water recycling depending on the understanding of the health risks, their individual economic circumstances, and affordability. Approaches vary between high technology/high cost/low risk and low technology/low cost/controlled risk. Furthermore, differences occur between countries and within individual countries. Inconsistencies can often be traced to lack of a unified scientific position on health effects. These inconsistencies increase public concerns about health risks and may give rise to conservative controls on responses to water recycling projects that some countries may be unable to afford. In this paper, an international panel of authors discusses how the different water recycling approaches might be linked together into international water recycling guidelines. These guidelines would incorporate a uniform approach to assessing hazards and risks while providing flexibility for individual countries to vary requirements to suit local circumstances of affordability and risk. The authors propose a framework of guidelines in which individual countries can progressively improve recycled water quality as lower risk levels become more affordable. The authors argue that a uniform international approach will result in a number of benefits including a better focus on risk management, better targeted research and development efforts and greater public confidence in water recycling. The authors invite discussion on the concepts put forward in the paper.

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Ywetta Maleterova ◽  
Frantisek Kastanek ◽  
Milena Rouskova ◽  
Martina Matejkova ◽  
Petr Kastanek ◽  
...  

Microalgae have increasingly gained research interest as a source of lipids for biodiesel production. The wet way processing of harvested microalgae was suggested and evaluated with respect to the possible environmental impacts and production costs. This study is focused on the three key steps of the suggested process: flocculation, water recycling, and extraction of lipids. Microalgae strains with high content of lipids were chosen for cultivation and subsequent treatment process. Ammonium hydroxide was tested as the flocculation agent and its efficiency was compared with chitosan. Determined optimal flocculation conditions for ammonium hydroxide enable the water recycling for the recurring microalgae growth, which was verified for the use of 30, 50, and 80% recycled water. For extraction of the wet microalgae hexane, hexane/ethanol and comparative chloroform/methanol systems were applied. The efficiency of hexane/ethanol extraction system was found as comparable with chloroform/methanol system and it seems to be promising owing to its low volatility and toxicity and mainly the low cost.


1982 ◽  
Vol 14 (9-11) ◽  
pp. 1337-1352 ◽  
Author(s):  
G G Cillié

An estimated 80 % of all illnesses in developing countries is in one way or another related to water. In order to alleviate this most serious condition, the united Nations has initiated the “International Water Decade”, for which the estimated costs are $600 000 million, a sum which is far beyond any available means. By application of “low-cost technology” this sum could be reduced to $100 000 million which brings the objective within the reach of possibility. Details are given of the design and methods of construction of units which are best suited to the specific requirements and which would be simple, reliable and economical to operate. These can be constructed largely from local materials and by local labour. The need for appropriate training of both operators and the user population is stressed.


Author(s):  
Tianpei Tang ◽  
Senlai Zhu ◽  
Yuntao Guo ◽  
Xizhao Zhou ◽  
Yang Cao

Evaluating the safety risk of rural roadsides is critical for achieving reasonable allocation of a limited budget and avoiding excessive installation of safety facilities. To assess the safety risk of rural roadsides when the crash data are unavailable or missing, this study proposed a Bayesian Network (BN) method that uses the experts’ judgments on the conditional probability of different safety risk factors to evaluate the safety risk of rural roadsides. Eight factors were considered, including seven factors identified in the literature and a new factor named access point density. To validate the effectiveness of the proposed method, a case study was conducted using 19.42 km long road networks in the rural area of Nantong, China. By comparing the results of the proposed method and run-off-road (ROR) crash data from 2015–2016 in the study area, the road segments with higher safety risk levels identified by the proposed method were found to be statistically significantly correlated with higher crash severity based on the crash data. In addition, by comparing the respective results evaluated by eight factors and seven factors (a new factor removed), we also found that access point density significantly contributed to the safety risk of rural roadsides. These results show that the proposed method can be considered as a low-cost solution to evaluating the safety risk of rural roadsides with relatively high accuracy, especially for areas with large rural road networks and incomplete ROR crash data due to budget limitation, human errors, negligence, or inconsistent crash recordings.


Author(s):  
OJS Admin

Advance high technology in professional life is progressing very fast. Technological advances, particularly, innovation of computers, have reorganized the aspect of working. Computer has become an essential unit of our life. However, its use is not free from health risks.


2021 ◽  
Vol 303 ◽  
pp. 01048
Author(s):  
Elena Murko ◽  
Vasily Murko ◽  
Jurgen Kretchmann

Technologically contaminated water, formed during processing of coal slurries, finds its application in modern technological cycles of coal enrichment. Limitation of use of untreated recycled water of coal concentration plants is caused by a high degree of its mineralization by various salts, presence of insoluble solid particles and presence of flotation reagents, coagulants and flocculants. Part of technical water purified from mineral and organic contaminants can be used in heating systems and heat exchange equipment of industrial enterprises, including the coal industry. For this purpose, it is necessary to reduce the scale-forming ability of service water (to reduce the content of soluble calcium and magnesium salts in water). One of the most effective and advanced methods is the stabilization treatment of water with an electric field. In addition, this method is environmentally safe, low-cost and simple. The article gives the foundation of the method of stabilization treatment of recycled water of concentrating plants by an electric field, a description of the methodology of the laboratory experiment for scaling reduction, and the analysis of the results.


RSC Advances ◽  
2019 ◽  
Vol 9 (67) ◽  
pp. 39011-39024 ◽  
Author(s):  
Gargi Goswami ◽  
Ratan Kumar ◽  
Ankan Sinha ◽  
Soumen Kumar Maiti ◽  
Babul Chandra Dutta ◽  
...  

A low-cost and scalable microalgal harvesting process with high harvesting efficiency has been demonstrated using a commercial flocculant and spent-water recycling.


Water Policy ◽  
2009 ◽  
Vol 11 (1) ◽  
pp. 21-35 ◽  
Author(s):  
Stewart Russell ◽  
Colleen Lux

Discussion of public reactions to water recycling is now framed around the idea of a ‘yuck factor’: advocates tend to assume an emotional response is the primary determinant of people's attitudes to reuse and they despair of people accepting rational arguments on its merits. Academic and consultancy work in the area has been dominated by particular work from social psychology: theories of disgust, models of attitude causation, and psychometric methods for measuring attitudes and determining the influences on them. This paper questions the models, their assumptions, the methods used to apply and validate them, their implications for change, and the practical consequences of framing the problem this way. It suggests that more fruitful explanations and more effective public engagement both require a shift to a more sociological and cultural explanation, one that examines users’ practices around the sociotechnical systems of providing water and handling waste. The paper concludes there are no compelling arguments or evidence that negative reactions to recycled water cannot change with opportunities to learn about the issues; indeed deliberative consultation mechanisms are essential if people are to reach an informed, reasoned and robust evaluation of the option. The ‘yuck’ discourse is of limited value in explaining public responses and counterproductive in formulating strategies for increasing public support.


2016 ◽  
Vol 881 ◽  
pp. 134-139 ◽  
Author(s):  
Marcos Flavio de Campos ◽  
Daniel Rodrigues

Ceramic magnets as barium ferrite or strontium ferrite have many applications in high technology. One of the reasons is the low cost when compared to competitor materials, as Alnico, MnBi, MnAl or NdFeB. In this study, the advantages and disadvantages of Ba and Sr ferrite magnets are discussed. One clear advantage is that ferrites are already oxides, and do not present the corrosion problems typical of NdFeB and other metallic alloys. As ferrites are oxides, the processing is much easier and cheaper. For example sintering can be done at air, and milling under wet condition. One of the main conclusions is the excellent ratio cost/benefit of ferrites, giving advantage in many applications. Special attention is given for application of ferrites in high efficiency motors.


2009 ◽  
Vol 30 (1) ◽  
pp. 22
Author(s):  
Peter Cox ◽  
Mark Angeles ◽  
Michael Storey

Sydney Water is seeking to maximise the delivery of recycled water meeting suitable standards for the intended use. The approach of health risk management through the 12 components of the national guidelines for water recycling is used in close consultation with the NSW Department of Health. Considerable effort is being put into demonstrating compliance with the guidelines when they are applied to specific recycling projects.


Author(s):  
M. Caprioli ◽  
R. Trizzino ◽  
F. Mazzone ◽  
M. Scarano

In this paper the results of some surveys carried out in an area of Apulian territory affected by serious environmental hazard are presented. Unmanned Aerial Vehicles (UAV) are emerging as a key engineering tool for future environmental survey tasks. UAVs are increasingly seen as an attractive low-cost alternative or supplement to aerial and terrestrial photogrammetry due to their low cost, flexibility, availability and readiness for duty. In addition, UAVs can be operated in hazardous or temporarily inaccessible locations, that makes them very suitable for the assessment and management of environmental risk conditions. In order to verify the reliability of these technologies an UAV survey and A LIDAR survey have been carried outalong about 1 km of coast in the Salento peninsula, near the towns of San Foca, Torre dellOrso and SantAndrea( Lecce, Southern Italy). This area is affected by serious environmental risks due to the presence of dangerous rocky cliffs named falesie. The UAV platform was equipped with a photogrammetric measurement system that allowed us to obtain a mobile mapping of the fractured fronts of dangerous rocky cliffs. UAV-images data have been processed using dedicated software (AgisoftPhotoscan). The point clouds obtained from both the UAV and LIDAR surveys have been processed using Cloud Compare software, with the aim of testing the UAV results with respect to the LIDAR ones. The total error obtained was of centimeter-order that is a very satisfactory result. The environmental information has been arranged in an ArcGIS platform in order to assess the risk levels. The possibility to repeat the survey at time intervals more or less close together depending on the measured levels of risk and to compare the output allows following the trend of the dangerous phenomena. In conclusion, for inaccessible locations of dangerous rocky bodies the UAV survey coupled with GIS methodology proved to be a key engineering tool for the management of environmental risks.


Sign in / Sign up

Export Citation Format

Share Document