Application of ionic liquids for the removal of heavy metals from wastewater and activated sludge

2012 ◽  
Vol 65 (10) ◽  
pp. 1765-1773 ◽  
Author(s):  
Maria Fuerhacker ◽  
Tadele Measho Haile ◽  
Daniel Kogelnig ◽  
Anja Stojanovic ◽  
Bernhard Keppler
Keyword(s):  
Heavy Metals ◽  
Ionic Liquids ◽  
Activated Sludge ◽  
Wastewater Treatment Plants ◽  
Industrial Effluents ◽  
Acid Extraction ◽  
Removal Of Heavy Metals ◽  
A New Technique ◽  
Wastewater Samples ◽  
Standard Solutions

This paper presents the results of adsorption studies on the removal of heavy metals (Cr, Cu, Cd, Ni, Pb and Zn) from standard solutions, real wastewater samples and activated sewage sludge using a new technique of liquid–liquid extraction using quaternary ammonium and phosphonium ionic liquids (ILs). Batch sorption experiments were conducted using the ILs [PR4][TS], [PR4][MTBA], [A336][TS] and [A336][MTBA]. Removal of these heavy metals from standard solutions were not effective, however removal of heavy metals from the industrial effluents/wastewater treatment plants were satisfactory, indicating that the removal depends mainly on the composition of the wastewater and cannot be predicted with standard solutions. Removal of heavy metals from activated sludge proved to be more successful than conventional methods such as incineration, acid extraction, thermal treatment, etc. For the heavy metals Cu, Ni and Zn, ≥90% removal was achieved.

scholarly journals Efficiency and Technological Reliability of Contaminant Removal in Household WWTPs with Activated Sludge

2021 ◽  
Vol 11 (4) ◽  
pp. 1889 ◽  
Author(s):  
Agnieszka Micek ◽  
Krzysztof Jóźwiakowski ◽  
Michał Marzec ◽  
Agnieszka Listosz ◽  
Tadeusz Grabowski
Keyword(s):  
Activated Sludge ◽  
Wastewater Treatment Plants ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Pollutant Removal ◽  
Treated Wastewater ◽  
Contaminant Removal ◽  
Nitrogen And Phosphorus ◽  
Wastewater Samples ◽  
Polish Law

The results of research on the efficiency and technological reliability of domestic wastewater purification in two household wastewater treatment plants (WWTPs) with activated sludge are presented in this paper. The studied facilities were located in the territory of the Roztocze National Park (Poland). The mean wastewater flow rate in the WWTPs was 1.0 and 1.6 m3/day. In 2017–2019, 20 series of analyses were done, and 40 wastewater samples were taken. On the basis of the received results, the efficiency of basic pollutant removal was determined. The technological reliability of the tested facilities was specified using the Weibull method. The average removal efficiencies for the biochemical oxygen demand in 5 days (BOD5) and chemical oxygen demand (COD) were 66–83% and 62–65%, respectively. Much lower effects were obtained for total suspended solids (TSS) and amounted to 17–48%, while the efficiency of total phosphorus (TP) and total nitrogen (TN) removal did not exceed 34%. The analyzed systems were characterized by the reliability of TSS, BOD5, and COD removal at the level of 76–96%. However, the reliability of TN and TP elimination was less than 5%. Thus, in the case of biogenic compounds, the analyzed systems did not guarantee that the quality of treated wastewater would meet the requirements of the Polish law during any period of operation. This disqualifies the discussed technological solution in terms of its wide application in protected areas and near lakes, where the requirements for nitrogen and phosphorus removal are high.

Performances of three R-AN-D-N wastewater treatment plants in the Czech Republic

2004 ◽  
Vol 50 (7) ◽  
pp. 249-255 ◽  
Author(s):  
Z. Bejvl ◽  
P. Matuška ◽  
J. Stara ◽  
P. Chudoba
Keyword(s):  
Wastewater Treatment ◽  
Czech Republic ◽  
Activated Sludge ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Industrial Effluents ◽  
Filamentous Bacteria ◽  
The Czech Republic ◽  
Treated Sewage ◽  
Nutrient Removal Efficiency

The evolution of Czech standards requires higher efficiency of nutrient removal from municipal wastewaters. At the beginning of the last decade of 20th century, a new activated sludge configuration called R-AN-D-N process has been described, successfully tested and now largely used at several wastewater treatment plants (WWTP) in the Czech republic. The main feature of the R-AN-D-N process is the introduction of a regeneration zone in sludge recycle, which enables to increase sludge age in the system without any substantial increase in WWTP volume. Performances of three Czech large WWTP with R-AN-D-N configuration have been monitored and compared within a period of one and a half years. The results confirmed excellent nutrient removal efficiency for wastewaters with different proportion between sewage and industrial effluents. Two of three monitored WWTP received wastewaters from breweries (Budweiser and Pilsner Urquell). The settleability of activated sludge from all three WWTP was correct, with SVI values usually ranging from 50 to 150 ml/g. Monitoring of sludge composition indicated proliferation of several filamentous bacteria, particularly types 0581, 0092 and M. parvicella. No severe bulking events were observed. Finally, the operational costs expressed in CZK (Czech crown: 1CZK = €0.0322) per cubic metre of treated sewage or per capita amounts respectively from 2.24 to 6.52, and from 285 to 342.

Sign in / Sign up

Export Citation Format

Share Document