scholarly journals Transmission of the AC electric power to a long distance

2018 ◽  
pp. 10-15
Author(s):  
Gennadii Ivanovich Davydov ◽  
◽  
Aleksandr Mikhailovich Khoiutanov ◽  
Pavel Filippovich Vasilev ◽  
Vitalii Petrovich Kobylin ◽  
...  
Keyword(s):  
2007 ◽  
Vol 46 (11) ◽  
pp. 1701-1717 ◽  
Author(s):  
Cristina L. Archer ◽  
Mark Z. Jacobson

Abstract Wind is the world’s fastest growing electric energy source. Because it is intermittent, though, wind is not used to supply baseload electric power today. Interconnecting wind farms through the transmission grid is a simple and effective way of reducing deliverable wind power swings caused by wind intermittency. As more farms are interconnected in an array, wind speed correlation among sites decreases and so does the probability that all sites experience the same wind regime at the same time. The array consequently behaves more and more similarly to a single farm with steady wind speed and thus steady deliverable wind power. In this study, benefits of interconnecting wind farms were evaluated for 19 sites, located in the midwestern United States, with annual average wind speeds at 80 m above ground, the hub height of modern wind turbines, greater than 6.9 m s−1 (class 3 or greater). It was found that an average of 33% and a maximum of 47% of yearly averaged wind power from interconnected farms can be used as reliable, baseload electric power. Equally significant, interconnecting multiple wind farms to a common point and then connecting that point to a far-away city can allow the long-distance portion of transmission capacity to be reduced, for example, by 20% with only a 1.6% loss of energy. Although most parameters, such as intermittency, improved less than linearly as the number of interconnected sites increased, no saturation of the benefits was found. Thus, the benefits of interconnection continue to increase with more and more interconnected sites.


2016 ◽  
Vol 850 ◽  
pp. 1000-1003
Author(s):  
Jiang Yu Wang ◽  
Xiao Jie Sun ◽  
Mi Zhang ◽  
Sha Wu ◽  
Zhi Yu Zhang

Oil and gas long-distance pipelines which are buried under ground often have to be closely laid in the narrow area with the high voltage electric-power line. The earth electrode of the electric tower seriously impacts the cathodic protection system of the pipeline when it discharges electricity into the earth. Sometimes the cathodic protection system may even lose its efficacy and the pipe being corroded. Under this condition, fiber reinforced plastics (FRP) has been paid more and more attention as the alterative of the steel pipe because of its outstanding cathodic-resisting property. In this article, the property of FRP compared with the steel was analyzed. The advantages and shortcomings of FRP as the material of oil and gas long-distance pipeline were introduced. Furthermore the feasibility of FRP pipeline was discussed.


2013 ◽  
Vol 361-363 ◽  
pp. 107-110
Author(s):  
Stefan Tkac ◽  
Zuzana Vranayova

Population is concentrated in the major cities which are facing the energy deficiency issues. The unregulated development of micro-urban areas is underestimated in both cases (Slovak Republic and Taiwan R.O.C.) so are the energy issues bound with them. Centralized energy sources require long distance wires to support remote areas.


Electronics ◽  
2021 ◽  
Vol 10 (17) ◽  
pp. 2179
Author(s):  
Imdadullah ◽  
Basem Alamri ◽  
Md. Alamgir Hossain ◽  
M. S. Jamil Asghar

An interconnection of electric power networks enables decarbonization of the electricity system by harnessing and sharing large amounts of renewable energy. The highest potential renewable energy areas are often far from load centers, integrated through long-distance transmission interconnections. The transmission interconnection mitigates the variability of renewable energy sources by importing and exporting electricity between neighbouring regions. This paper presents an overview of regional and global energy consumption trends by use of fuel. A large power grid interconnection, including renewable energy and its integration into the utility grid, and globally existing large power grid interconnections are also presented. The technologies used for power grid interconnections include HVAC, HVDC (including LCC, VSC comprising of MMC-VSC, HVDC light), VFT, and newly proposed FASAL are discussed with their potential projects. Future trends of grid interconnection, including clean energy initiatives and developments, UHV AC and DC transmission systems, and smart grid developments, are presented in detail. A review of regional and global initiatives in the context of a sustainable future by implementing electric energy interconnections is presented. It presents the associated challenges and benefits of globally interconnected power grids and intercontinental interconnectors. Finally, in this paper, research directions in clean and sustainable energy, smart grid, UHV transmission systems that facilitate the global future grid interconnection goal are addressed.


2015 ◽  
Vol 792 ◽  
pp. 293-299 ◽  
Author(s):  
Evgeny Shishkov ◽  
Valery Goldstein ◽  
Ivan Krivihin

Ultra High-Voltage Overhead Lines (UHV OHL) currently are successfully applied for solving two problems. The first case is powerful interconnection of two or more electric power systems. The second one is transition of significant power flows from generation areas to consuming areas – densely populated urban agglomerations and industrial centers. Longitudinal compensation installations are integral part of long-distance UHV OHL. The possibility of designing self-compensated OHL is considered in the paper.


2018 ◽  
Vol 67 ◽  
pp. 01013 ◽  
Author(s):  
Iswanjono ◽  
Y.B. Lukiyanto ◽  
Budi Setyahandana ◽  
Rines

Wind energy converter commonly converts wind power to shaft and electric power. One of the problems of transmitting shaft power is the limited distance between the driving to the driven shaft. This paper describes an experimental study of electrical transmission from driving to the driven shaft that was carried out on three modes of cable lines transmission. The driving shaft was attached to an electric generator that converts shaft r to electric power. The driven shaft was coupled by electric motor which reconverts the electric to shaft power. The generator and motor were BLDC and BDC permanent magnet electric machines. The distance of the driving to the driven shaft was 300 meters. The electric power was transmitted using wires. The wires consisted of 2 and 3 cables commonly used by peoples and sold in market place. The results showed that electric transmission mode on the experiment has important role on performance of shaft power to electric power conversion on driving generator and energy losses on cables transmission. DC on small wires electric transmission gave total efficiency of 16.2 %. DC on large wires electric transmission gave total efficiency of 32.9 %. AC on large wires electric transmission gave total efficiency of 36.4 %.


Sign in / Sign up

Export Citation Format

Share Document