Longitudinal oscillation of a rod with a variable cross section

2019 ◽  
Vol 14 (2) ◽  
pp. 138-141
Author(s):  
I.M. Utyashev
Keyword(s):  
Cross Section ◽  
Natural Frequencies ◽  
Liouville Problem ◽  
Variable Cross Section ◽  
Variable Cross ◽  
Longitudinal Vibrations ◽  
Cross Sectional ◽  
Independent Functions ◽  
The Cross ◽  
The Right

Variable cross-section rods are used in many parts and mechanisms. For example, conical rods are widely used in percussion mechanisms. The strength of such parts directly depends on the natural frequencies of longitudinal vibrations. The paper presents a method that allows numerically finding the natural frequencies of longitudinal vibrations of an elastic rod with a variable cross section. This method is based on representing the cross-sectional area as an exponential function of a polynomial of degree n. Based on this idea, it was possible to formulate the Sturm-Liouville problem with boundary conditions of the third kind. The linearly independent functions of the general solution have the form of a power series in the variables x and λ, as a result of which the order of the characteristic equation depends on the choice of the number of terms in the series. The presented approach differs from the works of other authors both in the formulation and in the solution method. In the work, a rod with a rigidly fixed left end is considered, fixing on the right end can be either free, or elastic or rigid. The first three natural frequencies for various cross-sectional profiles are given. From the analysis of the numerical results it follows that in a rigidly fixed rod with thinning in the middle part, the first natural frequency is noticeably higher than that of a conical rod. It is shown that with an increase in the rigidity of fixation at the right end, the natural frequencies increase for all cross section profiles. The results of the study can be used to solve inverse problems of restoring the cross-sectional profile from a finite set of natural frequencies.

The Changes of Internal Forces and the Reliability of Curved Bridge Taking the Cross-Sectional Design of Axial Symmetrical

2014 ◽  
Vol 587-589 ◽  
pp. 1631-1636
Author(s):  
Zheng Jiu Zhao ◽  
Jing Hong Gao
Keyword(s):  
Cross Section ◽  
Variable Cross Section ◽  
Radius Of Curvature ◽  
Variable Cross ◽  
Cross Sectional ◽  
Box Girder ◽  
Curved Bridge ◽  
The Cross ◽  
Cross Sectional Design ◽  
Bridge Models

Taking a bridge of 160m long variable cross-section prestressed continuous curved box-girder as the research object and analyzing the cross-sectional design of axis with axial symmetrical or axial non-symmetrical to research the structure forces change of the upper part of bridge in different curvature. In order to test and verify the variable cross-section of prestressed continuous curved box-girder bridge is safe and reliable via cross-sectional design with axial symmetrical instead of axial non-symtrical within a radius of curvature of the interval. Creating the straight bridge and curved bridge models with different radius of curvature in same span by Midas/Civil to compare their structure forces.

Transmission Loss of Variable Cross Section Apertures

2014 ◽  
Vol 136 (4) ◽  
Author(s):  
J. Li ◽  
L. Zhou ◽  
X. Hua ◽  
D. W. Herrin
Keyword(s):  
Finite Element ◽  
Cross Section ◽  
Sound Propagation ◽  
Transmission Loss ◽  
Element Model ◽  
Variable Cross Section ◽  
Variable Cross ◽  
Cross Sectional ◽  
Radiation Impedance ◽  
The Cross

Openings in enclosures or walls are frequently the dominant path for sound propagation. In the current work, a transfer matrix method is used to predict the transmission loss of apertures assuming that the cross-sectional dimensions are small compared with an acoustic wavelength. Results are compared with good agreement to an acoustic finite element approach in which the loading on the source side of the finite element model (FEM) is a diffuse acoustic field applied by determining the cross-spectral force matrix of the excitation. The radiation impedance for both the source and termination is determined using a wavelet algorithm. Both approaches can be applied to leaks of any shape and special consideration is given to apertures with varying cross section. Specifically, cones and abrupt area changes are considered, and it is shown that the transmission loss can be increased by greater than 10 dB at many frequencies.

scholarly journals The Vibration of Tubular Beam Conveying Fluid with Variable Cross Section

2020 ◽  
Vol 65 (1) ◽  
pp. 56-62
Author(s):  
Mohamed Gaith
Keyword(s):  
Flow Velocity ◽  
Cross Section ◽  
Natural Frequencies ◽  
Variable Cross Section ◽  
System Stability ◽  
Variable Cross ◽  
Cross Sectional ◽  
Critical Flow Velocity ◽  
Constant Flow Rate ◽  
The Impact

The dynamics and stability of flow induced vibration of flow conveying in pipes particularly in case of high velocity flow may lead to severe damage. Predicting the circular natural frequencies and critical fluid velocities is an important tool in design and prevent system failures. In this study transverse dynamic response of simply supported pipe with variable tubular cross sectional area carrying fluid with a constant flow rate is investigated. Euler Bernoulli's beam theory is used to model the pipe. Hamilton's principle will be used to produce the governing equation of motion for the system. The resulting partial differential equation is solved using Galerkin's technique. The impact of the flow velocity and non-uniform variable cross section on the natural frequencies of the system, critical flow velocity and system stability is presented.

scholarly journals Częstość drgań własnych słupa o zmiennym przekroju poprzecznym

2019 ◽  
Vol 18 (3) ◽  
pp. 103-111
Author(s):  
Vazgen Bagdasaryan
Keyword(s):  
Cross Section ◽  
Elastic Material ◽  
Natural Frequencies ◽  
Variable Cross Section ◽  
Variable Cross ◽  
Continuous Change ◽  
The Cross

In the paper natural frequencies of a pole with a variable cross-section were obtained. The pole was made of a homogeneous, elastic material. Solutions were obtained by approximation of the continuous change of the cross-section by changing by steps. The results are compared with the results obtained with Rayleigh’s method.

scholarly journals Dynamic Analysis of Single-Layered Graphene Nano-Ribbons (SLGNRs) with Variable Cross-Section Resting on Elastic Foundation

2019 ◽  
Vol 6 (1) ◽  
pp. 132-145 ◽  
Author(s):  
Subrat Kumar Jena ◽  
S. Chakraverty
Keyword(s):  
Elastic Foundation ◽  
Cross Section ◽  
Differential Quadrature Method ◽  
Beam Theory ◽  
Nonlocal Elasticity Theory ◽  
Variable Cross Section ◽  
Variable Cross ◽  
Winkler Elastic Foundation ◽  
The Cross ◽  
Euler Bernoulli Beam

AbstractThis article deals with free vibration of the variable cross-section (non-uniform) single-layered graphene nano-ribbons (SLGNRs) resting on Winkler elastic foundation using the Differential Quadrature Method (DQM). Here characteristic width of the cross-section is varied exponentially along the length of the nano-ribbon while the thickness of the cross section is kept constant. Euler–Bernoulli beam theory in conjunction with Eringen nonlocal elasticity theory is considered in this study. The numerical as well as graphical results are reported by using MATLAB codes developed by authors. Convergence of present method is explored and our results are compared with known results available in literature showing excellent agreement. Further, effects various parameters on frequency parameters are studied comprehensively.

scholarly journals Theoretical and Experimental Research of The Stability of The Eccentrically Loaded Steel Columns with Variable Cross–Section

2018 ◽  
Vol 7 (3.2) ◽  
pp. 458
Author(s):  
Gennady Trusov ◽  
Vladimir Ruban
Keyword(s):  
Cross Section ◽  
Research Work ◽  
Variable Cross Section ◽  
Suggested Method ◽  
National Standards ◽  
Discrete Models ◽  
Practical Calculation ◽  
Variable Cross ◽  
Cross Sectional ◽  
Steel Columns

The article deals with the problem of determining the ultimate load for the eccentrically loaded steel columns with variable-cross section.The purpose of the research work is to offer an evaluation technique and practical calculation of load-bearing ability of the beam-columns with variable cross-section on the basis of numerical research, which will allow to consider the true form of element deflection curve, the effect of cross-section form, physical nonlinearity of the material, and variety of element boundary conditions. The distinctive characteristic of the suggested method is usage of the discrete models for cross-sectional parts, for the true stress-strain curves of the materials, and for the other input data. The method was tested and the results were compared to known theoretical solutions and national standards. To establish the reliability of the developed method, the experimental study of steel columns with variable cross-section was conducted. The suggested method allows to obtain column curves tables of lowering coefficients for these elements, that can be used in practice of civil engineering, and are convenient with national standards and Eurocode. 

Solar Concentrator Structural Optimization: A Variable Beam Cross Section Design

2017 ◽  
Author(s):  
Moucun Yang ◽  
Yuezhao Zhu ◽  
Wei Fu ◽  
Garth Pearce ◽  
Robert A. Taylor
Keyword(s):  
Structural Optimization ◽  
Cross Section ◽  
Cost Savings ◽  
Variable Cross Section ◽  
Variable Cross ◽  
Maximum Displacement ◽  
Cross Sectional ◽  
Optical Efficiency ◽  
Box Structure ◽  
Section Design

The design and construction of solar concentrators heavily affects their cost, heat utilization and optical efficiency. Current trough concentrators support the reflector with an equivalent uniform beam configured from a metal grid sub-structure. Under gravity and wind loads, the support-structure stress distribution varies as a function of position of the structure and the tracking angle. In the conventional design, there is ample surplus stiffness and strength designed into some beams of the structure, which increases the overall weight and cost of the structure. This paper describes an approach towards structural optimization of trough concentrators (with the Eurotrough design taken as an example, that means that the safety factors and structure is similar with Eurotrough design) using a variable cross section beam. The main improvement of this approach comes from keeping the beams rigid and strong near the two ends (at the torque box structure) while allowing the middle of the structure to be relatively weak. Reducing the cross-sectional area of the central beams not only reduces amount of material needed for the structure but also reduces the deflection of the reflector. The simulated results show that the concentrator’s structural weight (including the torque box, endplates and cantilever arms) and the maximum displacement of the reflector are reduced about 15.3% (about 151.2kg per 12-metre long element) and 15.5%, respectively. This represents a meaningful capital and installation cost savings while at the same time improving the optical efficiency.

Sign in / Sign up

Export Citation Format

Share Document