scholarly journals Advanced Materials for Mercury 50 Gas Turbine Combustion System

2008 ◽  
Author(s):  
Jeffrey Price
Keyword(s):  
Gas Turbine ◽  
Advanced Materials ◽  
Combustion System ◽  
Gas Turbine Combustion

Advanced Materials for Mercury™ 50 Gas Turbine Combustion System

2006 ◽  
Author(s):  
Jeffrey Price ◽  
Josh Kimmel ◽  
Xiaoqun Chen ◽  
Arun Bhattacharya ◽  
Anthony Fahme ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Ceramic Matrix Composite ◽  
Field Evaluation ◽  
Ceramic Composites ◽  
Advanced Materials ◽  
Combustion System ◽  
Fuel Injector ◽  
Ods Alloys ◽  
Gas Turbine Combustion

Solar Turbines Incorporated (Solar), under cooperative agreement number DE-FC26-00CH 11049, is improving the durability of gas turbine combustion systems while reducing life cycle costs. This project is part of the Advanced Materials in Advanced Industrial Gas Turbines program in DOE’s Office of Distributed Energy. The targeted engine is the Mercury™ 50 gas turbine, which was developed by Solar under the DOE Advanced Turbine Systems (ATS) program (DOE contract number DE-FC21-95MC31173). The ultimate goal of the program is to demonstrate a fully integrated Mercury 50 combustion system, modified with advanced materials technologies, at a host site for 4,000 hours. The program has focused on a dual path development route to define an optimum mix of technologies for the Mercury 50 turbine and future Solar products. For liner and injector development, multiple concepts including high thermal resistance thermal barrier coatings (TBC), oxide dispersion strengthened (ODS) alloys, continuous fiber ceramic composites (CFCC), and monolithic ceramics were evaluated. An advanced TBC system for the combustor was down-selected for field evaluation. ODS alloys were down-selected for the fuel injector tip application. Preliminary component and sub-scale testing was conducted to determine material properties and demonstrate proof-of-concept. Full-scale rig and engine testing were used to validate engine performance prior to field evaluation. Field evaluation of ceramic matrix composite liners in the Centaur® 50 gas turbine engine [1–3] which was previously conducted under the DOE sponsored Ceramic Stationary Gas Turbine program (DE-AC02-92CE40960), is continuing under this program. This paper is a status review of the program, detailing the current progress of the development and field evaluations.

scholarly journals A Comparative Study on Fault Detection Methods for Gas Turbine Combustion Systems

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 389
Author(s):  
Jinfu Liu ◽  
Zhenhua Long ◽  
Mingliang Bai ◽  
Linhai Zhu ◽  
Daren Yu
Keyword(s):  
Fault Detection ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Operating Conditions ◽  
Detection Methods ◽  
Distribution Model ◽  
Outlet Temperature ◽  
Combustion System ◽  
Comparison Results ◽  
Gas Turbine Combustion

As one of the core components of gas turbines, the combustion system operates in a high-temperature and high-pressure adverse environment, which makes it extremely prone to faults and catastrophic accidents. Therefore, it is necessary to monitor the combustion system to detect in a timely way whether its performance has deteriorated, to improve the safety and economy of gas turbine operation. However, the combustor outlet temperature is so high that conventional sensors cannot work in such a harsh environment for a long time. In practical application, temperature thermocouples distributed at the turbine outlet are used to monitor the exhaust gas temperature (EGT) to indirectly monitor the performance of the combustion system, but, the EGT is not only affected by faults but also influenced by many interference factors, such as ambient conditions, operating conditions, rotation and mixing of uneven hot gas, performance degradation of compressor, etc., which will reduce the sensitivity and reliability of fault detection. For this reason, many scholars have devoted themselves to the research of combustion system fault detection and proposed many excellent methods. However, few studies have compared these methods. This paper will introduce the main methods of combustion system fault detection and select current mainstream methods for analysis. And a circumferential temperature distribution model of gas turbine is established to simulate the EGT profile when a fault is coupled with interference factors, then use the simulation data to compare the detection results of selected methods. Besides, the comparison results are verified by the actual operation data of a gas turbine. Finally, through comparative research and mechanism analysis, the study points out a more suitable method for gas turbine combustion system fault detection and proposes possible development directions.

Full Scale Testing of a Low Swirl Fuel Injector Concept for Ultra-Low NOx Gas Turbine Combustion Systems

2006 ◽  
Author(s):  
Waseem Nazeer ◽  
Kenneth Smith ◽  
Patrick Sheppard ◽  
Robert Cheng ◽  
David Littlejohn
Keyword(s):  
Natural Gas ◽  
Gas Turbine ◽  
Flame Temperature ◽  
Pressure Oscillation ◽  
Test Results ◽  
Combustion System ◽  
Fuel Injector ◽  
Annular Combustor ◽  
Swirl Injector ◽  
Gas Turbine Combustion

The continued development of a low swirl injector for ultra-low NOx gas turbine applications is described. An injector prototype for natural gas operation has been designed, fabricated and tested. The target application is an annular gas turbine combustion system requiring twelve injectors. High pressure rig test results for a single injector prototype are presented. On natural gas, ultra-low NOx emissions were achieved along with low CO. A turndown of approximately 100°F in flame temperature was possible before CO emissions increased significantly. Subsequently, a set of injectors was evaluated at atmospheric pressure using a production annular combustor. Rig testing again demonstrated the ultra-low NOx capability of the injectors on natural gas. An engine test of the injectors will be required to establish the transient performance of the combustion system and to assess any combustor pressure oscillation issues.

scholarly journals Combustion of LCV Coal Derived Fuel Gas for High Temperature, Low Emissions Gas Turbines in the British Coal Topping Cycle

1991 ◽  
Author(s):  
G. J. Kelsall ◽  
M. A. Smith ◽  
H. Todd ◽  
M. J. Burrows
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Calorific Value ◽  
Pollutant Emissions ◽  
Inlet Temperature ◽  
Outlet Temperature ◽  
Combustion System ◽  
Fuel Gas ◽  
Gas Turbine Combustion ◽  
Topping Cycle

Advanced coal based power generation systems such as the British Coal Topping Cycle offer the potential for high efficiency electricity generation with minimum environmental impact. An important component of the Topping Cycle programme is the development of a gas turbine combustion system to burn low calorific value (3.5–4.0 MJ/m3 wet gross) coal derived fuel gas, at a turbine inlet temperature of 1260°C, with minimum pollutant emissions. The paper gives an overview of the British Coal approach to the provision of a gas turbine combustion system for the British Coal Topping Cycle, which includes both experimental and modelling aspects. The first phase of this programme is described, including the design and operation of a low-NOx turbine combustor, operating at an outlet temperature of 1360°C and burning a synthetic low calorific value (LCV) fuel gas, containing 0 to 1000 ppmv of ammonia. Test results up to a pressure of 8 bar are presented and the requirements for further combustor development outlined.

Staged Combustion System for Improved Emissions Operability and Flexibility for 7HA Class Heavy Duty Gas Turbine Engine

2017 ◽  
Author(s):  
Hasan Karim ◽  
Jayaprakash Natarajan ◽  
Venkat Narra ◽  
Jun Cai ◽  
Shreekrishna Rao ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Firing Temperature ◽  
Gas Turbines ◽  
Test Facility ◽  
Engine Test ◽  
Combustion System ◽  
Operational Flexibility ◽  
Staged Combustion ◽  
Combustion Dynamics ◽  
Gas Turbine Combustion

Driven by global warming, a relentless march towards increased fuel efficiency has resulted in increased firing temperature for HA-class engines without an increase in baseload emissions. Moreover, emissions compliance for CO, NOx, and unburned hydrocarbons are desired over increased range in gas turbine load. In addition, exceptional gas turbine operational flexibility is desired to address potential intermittency due to the penetration of renewables in the electrical grid. Staged/sequential combustion is a state of the technology to provide operational flexibility and reduced emissions in power generation gas turbines. GE Power’s 7HA-class gas turbine combustion system combines GE’s proven DLN-2.6+ combustion technology, that has run reliably for over 1.3 million fired hours across more than eighty 9FA.03, 9F.05 & 7FA gas turbine engines, with an axially fuel staged system (AFS). Axially staging combustion to two zones allows for increased firing temperature at baseload (while maintaining the same NOx level) by operating the later/second stage hotter than the first/primary stage. During low load operation as the gas turbine firing temperature is reduced, percentage fuel split in the staged fuel system can either be reduced significantly or turned off and thereby keeping the overall combustion system into emissions compliance over a wider range of firing temperatures. This paper presents both the development testing of the staged combustion in the FA and HA class gas turbine combustion system rigs at GE Power’s Gas Turbine Technology Laboratory and the validation testing of staged combustion system for the 7HA.01 engine completed during Spring 2016 at GE Power’s engine test facility in Greenville, SC. The paper also discusses the significant simplification of operational principle and flexibility of startup, loading and baseload operation of the 7HA combustion system. Discussion of engine test results will show how axial fuel staging was utilized to demonstrate emissions compliance ( NOx (15% O2) < 25 ppm; CO < 9 ppm), operation from 14% load to 100% load with low combustion dynamics and also to enable wide wobbe capability, which is a normalized measure of fuel flexibility.

scholarly journals Development of a Gas Turbine Combustion System for Medium-BTU Fuel

1985 ◽  
Author(s):  
J. F. Savelli ◽  
G. L. Touchton
Keyword(s):  
Carbon Monoxide ◽  
Gas Turbine ◽  
Coal Gasification ◽  
Steam Injection ◽  
Oxides Of Nitrogen ◽  
Combustion System ◽  
Fuel Gas ◽  
High Hydrogen ◽  
Wet Gas ◽  
Gas Turbine Combustion

The Cool Water Coal Gasification Project requires a gas turbine combustion system to burn a high hydrogen medium-Btu coal gas produced in an oxygen-blown gasifier. The gas turbine selected for this demonstration plant is a General Electric Company MS7001E unit. The plant is located in Daggett, California, a location requiring compliance with stringent environmental regulations; that is, oxides of nitrogen (NOx) at 63.5 kg/hr and carbon monoxide (CO) at 35.0 kg/hr in the machine exhaust. The plant operating configuration requires fuel gas to be supplied at 330 °K and 477 °K with 20%/vol moisture blended. A combustion system was developed enabling the gas turbine to operate from full speed no load to full load on both fuel gas configurations. Distillate oil capability was also incorporated to facilitate safe machine startup and shutdown. Emissions requirements for NOx were met with steam injection, “CO” by combustor design, and sulfur oxides are met by fuel gas cleanup. A conventional combustion liner sleeve with a standard air admission schedule was used. A unique fuel nozzle, based upon past low-Btu fuel work, was designed incorporating the latest low erosion oil nozzle. One combustor of the 10 fitted to an MS7001E was tested at full pressure and airflow. Test results indicate, as predicted analytically, that NOx prediction varies substantially between cold dry fuel gas and hot wet gas. NOx compliance was attainable with little degradation of other design considerations. Carbon monoxide emissions were well below the required limits.

Sign in / Sign up

Export Citation Format

Share Document