Synthesis, Analytical Characterization and Spectroscopic Investigation of Chloramphenicol Impurity A for the Quality Control of Chloramphenicol and its Formulation as Per International Compendium

2020 ◽  
Vol 17 (5) ◽  
pp. 382-388
Author(s):  
Aparna Wadhwa ◽  
Faraat Ali ◽  
Sana Parveen ◽  
Robin Kumar ◽  
Gyanendra N. Singh

Objective: The main aim of the present work is to synthesize chloramphenicol impurity A (CLRMIMP- A) in the purest form and its subsequent characterization by using a panel of sophisticated analytical techniques (LC-MS, DSC, TGA, NMR, FTIR, HPLC, and CHNS) to provide as a reference standard mentioned in most of the international compendiums, including IP, BP, USP, and EP. The present synthetic procedure has not been disclosed anywhere in the prior art. Methods: A simple, cheaper, and new synthesis method was described for the preparation of CLRM-IMP-A. It was synthesized and characterized by FTIR, DSC, TGA, NMR (1H and 13C), LC-MS, CHNS, and HPLC. Results: CLRM-IMP-A present in drugs and dosage form can alter the therapeutic effects and adverse reaction of a drug considerably, it is mandatory to have a precise method for the estimation of impurities to safeguard the public health. Under these circumstances, the presence of CLRM-IMP-A in chloramphenicol (CLRM) requires strict quality control to satisfy the specified regulatory limit. The synthetic impurity obtained was in the pure form to provide a certified reference standard or working standard to stakeholders with defined potency. Conclusion: The present research describes a novel technique for the synthesis of pharmacopoeial impurity, which can help in checking/controlling the quality of the CLRM in the international markets.

2020 ◽  
Vol 9 (2) ◽  
pp. 89-103
Author(s):  
Nikita Saraswat ◽  
Neetu Sachan ◽  
Phool Chandra

Introduction: Selinum vaginatum is an endemic Indian plant present on high altitude and is known as “Bhootkeshi,” by the locals. The root of plant Selinum vaginatum commonly known as “Bhootkeshi” from the family Umbellifercae is an aromatic herbal drug. Selinum vaginatum has been used traditionally for curing seizures, epilepsy, mental illness, and hysteria. This plant has shown therapeutic effects as used by the locals. There is no data available regarding standardization of the roots of Selinum vaginatum. It is a novel work as the plant is rarely found and shows medicinal values but no quality control work has been performed. Objective: The aim of this paper is to study quality control and carry out physicochemical analysis and standardization of the roots of Selinum vaginatum for determining its quality and purity. As no work has been performed on the roots of this plant, so standardization will help in keeping a record of the parameters exhibited during the evaluation of the roots of Selinum vaginatum. Methods: The organoleptic characteristics were studied and physicochemical tests, phytochemical analysis, fluorescence analysis, TLC, UV, FTIR, NMR, and Electrospray Ionisation - Mass spectroscopy, HPLC and other parameters were carried out for the standardization of the test drug. The procedures were carried out as per the WHO standards. The total ash values, swelling index, foaming index, moisture content, alcohol, and water-soluble extractive values were calculated. The TLC profile of Selinum vaginatum was observed and the UV, FTIR, HPLC, NMR and Mass spectroscopies of the plant were also performed. Results: The microscopic results showed the presence of schizogenous canals in abundance, cork cells, oil and globules, while medullary rays and pith were absent and around 10-17 layers of cells were seen. The presence of active compounds like phenols, terpenoids, alkaloids, coumarins, essential oils, tannins, saponins, carbohydrates, and acids was reported by phytochemical tests, TLC, UV, NMR, HPLC, Mass, and FTIR spectroscopy methods. These compounds can be studied in detail for understanding the potential pharmacological benefits and decoding the traditional uses. The spectroscopic analysis and physicochemical tests have shown the presence of phenols, esters, organic halogens, carbohydrate, carboxylic acids, alcohols, ethers, and glycosides which must be responsible for the medicinal properties of the plant. Conclusion: This study has provided a set of information that will be useful for the identification of fresh batches of the roots of Selinum vaginatum and this can be used as a reference set of information for accessing the purity, quality and identification, and analysis of the authenticity of the plant roots. Spectroscopic techniques have shown peaks, which on interpretation have reported the presence of active compounds - (coumarins like selenidin, angelicin, vaginidine, furocoumarin - oroselol and coumarin derivative- lomatin, isovaleric acid, Valeranone, Tricyclene, p-Cymene, α-Pinene, β-Pinene, Camphene, Borneol, p- Camphene, cholorgenic acid, β-Myrcene, Limonene and α-Pineneoxide which can be studied for understanding and identifying the pharmacological actions of the rhizomatous roots of S. vaginatum. All the information collected by research on the roots of S. vaginatum will help in the identification of crude drugs and also in the development of a standard for the drug Selinum vaginatum.


Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1906
Author(s):  
Marissa Pérez-Alvarez ◽  
Gregorio Cadenas-Pliego ◽  
Odilia Pérez-Camacho ◽  
Víctor E. Comparán-Padilla ◽  
Christian J. Cabello-Alvarado ◽  
...  

Copper nanoparticles (CuNP) were obtained by a green synthesis method using cotton textile fibers and water as solvent, avoiding the use of toxic reducing agents. The new synthesis method is environmentally friendly, inexpensive, and can be implemented on a larger scale. This method showed the cellulose capacity as a reducing and stabilizing agent for synthetizing Cellulose–Copper nanoparticles (CCuNP). Nanocomposites based on CCuNP were characterized by XRD, TGA, FTIR and DSC. Functional groups present in the CCuNP were identified by FTIR analysis, and XRD patterns disclosed that nanoparticles correspond to pure metallic Cu°, and their sizes are at a range of 13–35 nm. Results demonstrated that CuNPs produced by the new method were homogeneously distributed on the entire surface of the textile fiber, obtaining CCuNP nanocomposites with different copper wt%. Thus, CuNPs obtained by this method are very stable to oxidation and can be stored for months. Characterization studies disclose that the cellulose crystallinity index (CI) is modified in relation to the reaction conditions, and its chemical structure is destroyed when nanocomposites with high copper contents are synthesized. The formation of CuO nanoparticles was confirmed as a by-product, through UV spectroscopy, in the absorbance range of 300–350 nm.


2008 ◽  
Vol 91 (11) ◽  
pp. 3800-3802 ◽  
Author(s):  
Hu Hanjun ◽  
Zhou Wan-cheng ◽  
Luo Fa ◽  
Zhu Dong-Mei ◽  
Xu Jie

Author(s):  
Juliana M. Juárez ◽  
Lisandro F. Venosta ◽  
Oscar A. Anunziata ◽  
Marcos B. Gómez Costa

1965 ◽  
Vol 7 (12) ◽  
pp. 2384-2385 ◽  
Author(s):  
D.G. Dimitrov ◽  
L.S. Gal'braikh ◽  
Z.A. Rogovin

2021 ◽  
Vol 871 ◽  
pp. 293-299
Author(s):  
Lan Tao ◽  
Zhi Ming Wang ◽  
Shu Huan Lu ◽  
Liu Liu Xu ◽  
Mu Zi Li ◽  
...  

The paper provided a simple method for preparing the β-carotene reference standard from a β-carotene food additive (96%) based on high speed countercurrent chromatography (HSCCC). The obtained material was qualitatively detected by IR, NMR, MS, the results showed the material was purified β-carotene, the purity of obtained β-carotene reference standard can be as high as 99%. The prepared reference standard can be used for quality control of related health food. The provided method is simple, universal, cheap, and the sample preparation can be enlarged to g grade.


2019 ◽  
pp. 191-236
Author(s):  
J. J. Prías‐Barragán ◽  
J. J. Prías‐Barragán ◽  
K. Gross ◽  
H. Ariza‐Calderón ◽  
P. Prieto

Sign in / Sign up

Export Citation Format

Share Document