scholarly journals Numerical Study of Flow Field and Aerodynamic Performance of Straight Bladed VAWT at Variable Tip Speed Ratios

2015 ◽  
Vol 9 (1) ◽  
pp. 1017-1024 ◽  
Author(s):  
Mei Yi ◽  
Qu Jianjun
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Vortex Shedding ◽  
Numerical Study ◽  
Aerodynamic Performance ◽  
Wake Flow ◽  
Speed Ratio ◽  
Power Performance ◽  
Tip Speed Ratio ◽  
And Diffusion

This paper studies the relationship between unsteady flow features and instantaneous torque and power performance of straight bladed vertical axis wind turbine at variable tip speed ratios. The rotor unsteady flow field simulation was carried out by using computational fluid dynamics method. The flow physics and the principle of changing flow field acting on torque performance and power performance have been analyzed where the rotating rotor was the major concern. The results show that the flow feature alters from periodical blade dynamic stall vortexes generation, development and shedding at low tip speed ratio to cyclical formation, evolution and diffusion of blade wake flow with the rising tip speed ratio. Both vortex shedding around the blade and interaction of blade wakes degrade the rotor aerodynamic performance. It is suggested that, to absorb maximum wind energy, delay the blade vortex shedding and reduce the range of blade wake, evolution and diffusion should be included in the rotor aerodynamic design.

scholarly journals Numerical study of unsteady flow and exciting force for swept turbomachinery blades

2016 ◽  
Vol 20 (suppl. 3) ◽  
pp. 669-676
Author(s):  
Di Zhang ◽  
Ma Jiao-Bin ◽  
Qi Jing
Keyword(s):  
Boundary Layer ◽  
Unsteady Flow ◽  
Pressure Fluctuation ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Aerodynamic Performance ◽  
Rotor Blades ◽  
Stable Operation ◽  
Straight Blade ◽  
Excitation Force

The aerodynamic performance of blade affects the vibration characteristics and stable operation of turbomachinery closely. The aerodynamic performance of turbine stage can be improved by using swept blade. In this paper, the RANS method and the RNG k-? turbulence mode were adopted to investigate the unsteady flow characteristics and excitation force of swept blade stage. According to the results, for the swept blade, the fluid of boundary layer shifts in radial direction due to the influence of geometric construction. It is observed that there is similar wake development for several kinds of stators, and the wake has a notable effect on the boundary layer of the rotor blades. When compared with straight blade, pressure fluctuation of forward-swept blade is decreased while the pressure fluctuation of backward-swept blade is increased. The axial and tangential fundamental frequency excitation force factors of 15?forward-swept blade are 0.139 and 0.052 respectively, which are the least, and all excitation force factors are in the normal range. The excitation factor of the forward-swept blade is decreased compared with straight blade, and the decreasing percentage is closely related to the swept angle. As for backward-swept blades, the situation is the other way around. Additionally, the change of axial excitation factor is more obvious. So the vibration reduction performance of forward-swept blade is better.

scholarly journals A Numerical Study of Aerodynamic Performance and Noise of a Bionic Airfoil Based on Owl Wing

2014 ◽  
Vol 6 ◽  
pp. 859308 ◽  
Author(s):  
Xiaomin Liu ◽  
Xiang Liu
Keyword(s):  
Reynolds Number ◽  
Unsteady Flow ◽  
Noise Reduction ◽  
Numerical Study ◽  
Aerodynamic Performance ◽  
Centrifugal Fan ◽  
Surface Geometry ◽  
Airfoil Surface ◽  
Acoustic Sources ◽  
Bionic Airfoil

Noise reduction and efficiency enhancement are the two important directions in the development of the multiblade centrifugal fan. In this study, we attempt to develop a bionic airfoil based on the owl wing and investigate its aerodynamic performance and noise-reduction mechanism at the relatively low Reynolds number. Firstly, according to the geometric characteristics of the owl wing, a bionic airfoil is constructed as the object of study at Reynolds number of 12,300. Secondly, the large eddy simulation (LES) with the Smagorinsky model is adopted to numerically simulate the unsteady flow fields around the bionic airfoil and the standard NACA0006 airfoil. And then, the acoustic sources are extracted from the unsteady flow field data, and the Ffowcs Williams-Hawkings (FW-H) equation based on Lighthill's acoustic theory is solved to predict the propagation of these acoustic sources. The numerical results show that the lift-to-drag ratio of bionic airfoil is higher than that of the traditional NACA 0006 airfoil because of its deeply concave lower surface geometry. Finally, the sound field of the bionic airfoil is analyzed in detail. The distribution of the A-weighted sound pressure levels, the scaled directivity of the sound, and the distribution of dP/dt on the airfoil surface are provided so that the characteristics of the acoustic sources could be revealed.

scholarly journals Performance and Wake Characterization of a Model Hydrokinetic Turbine: The Reference Model 1 (RM1) Dual Rotor Tidal Energy Converter

Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5145
Author(s):  
Craig Hill ◽  
Vincent S. Neary ◽  
Michele Guala ◽  
Fotis Sotiropoulos
Keyword(s):  
Reynolds Number ◽  
Reference Model ◽  
Angular Position ◽  
Tidal Energy ◽  
Wake Flow ◽  
Height Velocity ◽  
Scale Model ◽  
Speed Ratio ◽  
Power Performance ◽  
Energy Converter

The mechanical power and wake flow field of a 1:40 scale model of the US Department of Energy’s Reference Model 1 (RM1) dual rotor tidal energy converter are characterized in an open-channel flume to evaluate power performance and wake flow recovery. The NACA-63(4)-24 hydrofoil profile in the original RM1 design is replaced with a NACA-4415 profile to minimize the Reynolds dependency of lift and drag characteristics at the test chord Reynolds number. Precise blade angular position and torque measurements were synchronized with three acoustic Doppler velocimeters (ADV) aligned with each rotor centerline and the midpoint between the rotor axes. Flow conditions for each case were controlled to maintain a hub height velocity, uhub= 1.04 ms−1, a flow Reynolds number, ReD= 4.4 × 105, and a blade chord length Reynolds number, Rec= 3.1 × 105. Performance was measured for a range of tip-speed ratios by varying rotor angular velocity. Peak power coefficients, CP= 0.48 (right rotor) and CP= 0.43 (left rotor), were observed at a tip speed ratio, λ= 5.1. Vertical velocity profiles collected in the wake of each rotor between 1 and 10 rotor diameters are used to estimate the turbulent flow recovery in the wake, as well as the interaction of the counter-rotating rotor wakes. The observed performance characteristics of the dual rotor configuration in the present study are found to be similar to those for single rotor investigations in other studies. Similarities between dual and single rotor far-wake characteristics are also observed.

scholarly journals Numerical Study on Unsteady Flow Field of Arterial Stenosis

2014 ◽  
Vol 90 ◽  
pp. 339-345 ◽  
Author(s):  
Syeda Reham Shahed ◽  
Mohammad. Ali ◽  
Swarna Saha ◽  
Most. Nasrin Akhter
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Numerical Study ◽  
Arterial Stenosis

Numerical Study of Rotor–Stator Interaction of a Centrifugal Pump at Part Load With Special Emphasis on Unsteady Blade Load

2020 ◽  
Vol 142 (8) ◽  
Author(s):  
Nicolas Casimir ◽  
Xiangyuan Zhu ◽  
Markus Hundshagen ◽  
Gerhard Ludwig ◽  
Romuald Skoda
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Centrifugal Pump ◽  
Numerical Study ◽  
Measurement Data ◽  
Load Flow ◽  
Secondary Outcome ◽  
Pump Design ◽  
Part Load ◽  
Unsteady Characteristics

Abstract Three-dimensional (3D) unsteady Reynolds-averaged Navier–Stokes (URANS) flow simulations are conducted to investigate the highly unsteady flow field at part load operation of a centrifugal pump. By the availability of unsteady flow field measurement data in the impeller wake region, a thorough validation of the simulation method is performed. Grid independence of the results is ensured. Unsteady characteristics in terms of head and shaft power as well as transient blade loads are evaluated to assess the unsteady pump performance. Significant mis-loading of the blading is revealed when one blade passes the volute tongue and associated with the strong unsteady and 3D flow field in the impeller-volute tongue region. Negative radial velocity in the tongue region is the origin of a vortex at the blade pressure side and a subsequent pressure drop that leads to even temporally negative blade loading. The results provide a detailed insight in the complex part load flow field that might be utilized for an improved pump design. As a valuable secondary outcome, a comparison of results obtained by two widely used computational fluid dynamics (CFD) codes for pump flow simulation is provided, i.e., the commercial code ansyscfx and the branch foam-extend of the open source software openfoam. It is found that the results of both methods in terms of unsteady characteristics as well as local ensemble-averaged velocity field are consistent.

Experimental Investigation of a Tandem Cylinder System With a Yawed Upstream Cylinder

2011 ◽  
Author(s):  
Stephen J. Wilkins ◽  
Joseph W. Hall
Keyword(s):  
Experimental Investigation ◽  
Flow Field ◽  
Unsteady Flow ◽  
Surface Pressure ◽  
Vortex Shedding ◽  
Flow Direction ◽  
Pressure Fluctuations ◽  
Mean Flow ◽  
The Mean ◽  
Velocity Spectra

The unsteady flow field produced by a tandem cylinder system with the upstream cylinder yawed to the mean flow direction is investigated for upstream cylinder yaw angles from α = 60° to α = 90°. Multi-point fluctuating surface pressure and hotwire measurements were conducted at various spanwise positions on both the upstream and downstream cylinders. The results indicate that yawing the front cylinder to the mean flow direction causes the pressure and velocity spectra on the upstream and downstream cylinders to become more broadband than for a regular tandem cylinder system, and reduces the magnitude of the peak associated with the vortex-shedding. However, span-wise correlation and coherence measurements indicate that the vortex-shedding is still present and was being obscured by the enhanced three-dimensionality that the upstream yawed cylinder caused and was still present and correlated from front to back, at least for the larger yaw angles investigated. When the cylinder was yawed to α = 60°, the pressure fluctuations became extremely broadband and exhibited shorter spanwise correlation.

A Combined Experimental and Numerical Study of Flow Past a Single Step Cylinder

2010 ◽  
Author(s):  
Chris R. Morton ◽  
Serhiy Yarusevych
Keyword(s):  
Vortex Shedding ◽  
Numerical Study ◽  
Experimental Tests ◽  
Numerical Approach ◽  
Single Step ◽  
Wake Flow ◽  
Cylinder Wake ◽  
Flow Topology ◽  
Single Vortex ◽  
Flow Past

The current study investigates flow past a step cylinder for ReD = 1050 and D/d = 2 using both experimental and numerical methods. The focus of the study is on the vortex shedding and vortex interactions occurring in the step cylinder wake. Flow visualization with hydrogen bubble technique and planar Laser Induced Fluorescence has shown that three distinct spanwise vortex cells form: a single vortex shedding cell in the wake of the small cylinder and two vortex shedding cells in the wake of the large cylinder. Vortex connections form between the spanwise vortices in these cells downstream of the step, and vortex dislocations occur at cell boundaries. Complementary to the experimental tests, an LES-RANS hybrid numerical simulation is used to model the flow development. A comparison of the experimental and numerical results indicates that the numerical approach adequately models vortex dynamics in the wake of a step cylinder and, thus, may be used to analyze time dependent, three-dimensional flow topology which is difficult to characterize quantitatively using experimental methods.

Prediction of Aerodynamic Noise Radiated From a Vertical-Axis Wind Turbine

2003 ◽  
Author(s):  
Akiyoshi Iida ◽  
Akisato Mizuno ◽  
Kyoji Kamemoto
Keyword(s):  
Flow Field ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Sound Source ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
Low Noise ◽  
Aerodynamic Noise ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine

Unsteady flow field and flow induced noise of vertical axis wind turbine are numerically investigated. The flow field is numerically calculated by the vortex method with core-spreading model. This simulation obtains aerodynamic performance and aerodynamic forces. Aerodynamic noise is also simulated by using Ffowcs Williams-Hawkings equation with compact body and low-Mach number assumptions. Tip speed of rotor blades are not so high, then the contribution of the moving sound source is smaller than that of the dipole sound source. Since the maximum power coefficient of VAWT can be obtained at lower tip-speed ratio compared to the conventional, horizontal axis wind turbines, the aerodynamic noise from vertical axis wind turbine is smaller than that of the conventional wind turbines at the same aerodynamic performance. This result indicates that the vertical axis wind turbines are useful to develop low-noise wind turbines.

Sign in / Sign up

Export Citation Format

Share Document