Acceleration of Baylis-Hillman reaction using ionic liquid supported organocatalyst

2021 ◽  
Vol 08 ◽  
Author(s):  
Vivek Srivastava
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Reaction Rate ◽  
Reaction Medium ◽  
Catalyst Loading ◽  
Catalyst Recycling ◽  
Catalytic Systems ◽  
Heterogeneous Catalytic ◽  
Highly Active ◽  
Low Catalyst Loading

Background: Baylis-Hillman reaction suffers from the requirement of cheap starting materials, easy reaction protocol, possibility to create the chiral center in the reaction product has increased the synthetic efficacy of this reaction, and high catalyst loading, low reaction rate, and poor yield. Objective: The extensive use of various functional or non-functional ionic liquids (ILs) with organocatalyst increases the reaction rate of various organic transformations as a reaction medium and as a support to anchor the catalysts. Methods: In this manuscript, we have demonstrated the synthesis of quinuclidine-supported trimethylamine-based functionalized ionic liquid as a catalyst for the Baylis-Hillman reaction. Results: We obtained the Baylis-Hillman adducts in good, isolated yield, low catalyst loading, short reaction time, broad substrate scope, accessible product, and catalyst recycling. N-((E,3S,4R)-5-benzylidene-tetrahydro-4-hydroxy-6-oxo-2H-pyran-3-yl) palmitamide was also successfully synthesized using CATALYST-3 promoted Baylis-Hillman reaction. Conclusion: We successfully isolated the 25 types of Baylis-Hillman adducts using three different quinuclidine-supported ammonium-based ionic liquids such as Et3AmQ][BF4] (CATALYST-1), [Et3AmQ][PF6] (CATALYST-2), and [TMAAmEQ][NTf2](CATALYST-3) as new and efficient catalysts. Tedious and highly active N-((E,3S,4R)-5-benzylidene-tetrahydro-4-hydroxy-6-oxo-2H-pyran-3-yl) palmitamide derivative was also synthesized using CATALYST-3 followed by Baylis-Hillman reaction. Generally, all the responses demonstrated higher activity and yielded high competition with various previously reported homogenous and heterogeneous Catalytic systems. Easy catalyst and product recovery followed by six catalysts recycling were the added advantages of the prosed catalytic system.

scholarly journals Synthesis and Characterization of Pd exchanged MMT Clay for Mizoroki-Heck Reaction

2018 ◽  
Vol 16 (1) ◽  
pp. 605-613 ◽  
Author(s):  
Vivek Srivastava
Keyword(s):  
Heck Reaction ◽  
Exchange Process ◽  
Reaction Medium ◽  
Analytical Techniques ◽  
Catalyst Loading ◽  
Catalyst Recycling ◽  
Mmt Clay ◽  
Vinyl Phosphonates ◽  
Low Catalyst Loading

AbstractWe successfully synthesized Pd@MMT clay using a cation exchange process. We characterized all the synthesized Pd@MMT clays using sophisticated analytical techniques before testing them as a heterogeneous catalyst for the Mizoroki - Heck reaction (mono and double). The highest yield of the Mizoroki-Heck reaction product was recovered using thermally stable and highly reactive Pd@ MMT-1 clay catalyst in the functionalized ionic liquid reaction medium. We successfully isolated 2-aryl-vinyl phosphonates (mono-Mizoroki-Heck reaction product) and 2,2-diaryl-vinylphosphonates (double-Mizoroki-Heck reaction product) using aryl halides and dialkyl vinyl phosphonates in higher yields. The low catalyst loading, easy recovery of reaction product and 8 times catalyst recycling are the major highlights of this proposed protocol.

Active pyridinium based ionic liquid anchored quinuclidine organocatalyst for Morita-Baylis-Hillman reaction

2021 ◽  
Vol 18 ◽  
Author(s):  
Vivek Srivastava
Keyword(s):  
Ionic Liquid ◽  
Analytical Techniques ◽  
Chemical Yield ◽  
Biologically Active ◽  
Catalyst Loading ◽  
Catalyst Recycling ◽  
Ether Extraction ◽  
Different Types ◽  
Low Catalyst Loading

: In the present manuscript, we easily synthesized three different types of ionic liquid supported 3-quinuclidinone organocatalysts such as [PyAmEQ][BF4] (Py-CATALYST-1), [PyAmEQ][PF6] (Py-CATALYST-2), and [PyAmEQ][NTf2] (Py-CATALYST-3). After performing the careful characterization of the above catalysts with sophisticated analytical techniques, we utilized them as a catalyst to study the passive Morita-Baylis-Hillman reaction. The corresponding Morita-Baylis-Hillman adducts were easily isolated, followed by the simple ether extraction method. Moreover, the above protocol also promoted low catalyst loading, short reaction time, wide substrate scope, easy product, and catalyst recycling. We easily recycled the catalytic system for 5 runs with no noticeable loss in the chemical yield. Additionally, Py-CATALYST-3 was also used to prepare biologically active materials, i.e., N-((E,3S,4R)-5-benzylidene-tetrahydro-4-hydroxy-6-oxo-2H-pyran-3-yl) palmitamide derivatives.

Three-Component Synthesis of 4-Arylidene-3-alkylisoxazol-5(4H)-ones in the presence of potassium 2,5-dioxoimidazolidin-1-ide

2021 ◽  
Vol 25 ◽  
Author(s):  
Neda Reihani ◽  
Hamzeh Kiyani
Keyword(s):  
Ethylene Glycol ◽  
Ethyl Acetoacetate ◽  
Reaction Medium ◽  
Hydroxylamine Hydrochloride ◽  
Aromatic Aldehydes ◽  
Catalyst Loading ◽  
Efficient Synthesis ◽  
Current Process ◽  
High Yields ◽  
Low Catalyst Loading

: An efficient synthesis of 4-arylidene-3-alkylisoxazole-5(4H)-ones has been implemented via the three-component cyclocondensation of aryl(heteroaryl)aldehydes with hydroxylamine hydrochloride and β-ketoesters. The potassium 2,5-dioxoimidazolidin-1-ide has been introduced as the new organocatalyst to facilitate of this heterocyclization. In the current process, three starting materials, including substituted benzaldehydes/heterocyclic aromatic aldehydes, hydroxylamine hydrochloride, and ethyl acetoacetate/propyl acetoacetate/butyryl acetoacetate have been successfully used for the synthesize of the number of substituted isoxazole-5(4H)-ones in good to high yields in ethylene glycol as a green reaction medium at 80 ºC. The low catalyst loading is also a main advantage over the some reported catalysts.

scholarly journals Ruthenium-Based Catalytic Systems Incorporating a Labile Cyclooctadiene Ligand with N-Heterocyclic Carbene Precursors for the Atom-Economic Alcohol Amidation Using Amines

Molecules ◽  
2018 ◽  
Vol 23 (10) ◽  
pp. 2413 ◽  
Author(s):  
Cheng Chen ◽  
Yang Miao ◽  
Kimmy De Winter ◽  
Hua-Jing Wang ◽  
Patrick Demeyere ◽  
...  
Keyword(s):  
Catalytic System ◽  
High Resolution Mass Spectrometry ◽  
Amide Bond ◽  
Catalyst Loading ◽  
Catalytic Systems ◽  
Amide Bond Formation ◽  
Highly Active ◽  
Metal Catalyzed ◽  
Ru Species

Transition-metal-catalyzed amide-bond formation from alcohols and amines is an atom-economic and eco-friendly route. Herein, we identified a highly active in situ N-heterocyclic carbene (NHC)/ruthenium (Ru) catalytic system for this amide synthesis. Various substrates, including sterically hindered ones, could be directly transformed into the corresponding amides with the catalyst loading as low as 0.25 mol.%. In this system, we replaced the p-cymene ligand of the Ru source with a relatively labile cyclooctadiene (cod) ligand so as to more efficiently obtain the corresponding poly-carbene Ru species. Expectedly, the weaker cod ligand could be more easily substituted with multiple mono-NHC ligands. Further high-resolution mass spectrometry (HRMS) analyses revealed that two tetra-carbene complexes were probably generated from the in situ catalytic system.

scholarly journals Optimization of transition metal nanoparticle-phosphonium ionic liquid composite catalytic systems for deep hydrogenation and hydrodeoxygenation reactions

2015 ◽  
Vol 17 (3) ◽  
pp. 1597-1604 ◽  
Author(s):  
Abhinandan Banerjee ◽  
Robert W. J. Scott
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Transition Metal ◽  
Metal Nanoparticles ◽  
Metal Nanoparticle ◽  
Catalytic Systems ◽  
Phosphonium Ionic Liquid

Stable metal nanoparticles in tetraalkylphosphonium ionic liquids can catalyze hydrogenations, as well as phenol hydrodeoxygenation, owing to presence of adventitious borates.

scholarly journals Ionic liquids as an enabling tool to integrate reaction and separation processes

2019 ◽  
Vol 21 (24) ◽  
pp. 6527-6544 ◽  
Author(s):  
Rocio Villa ◽  
Elena Alvarez ◽  
Raul Porcar ◽  
Eduardo Garcia-Verdugo ◽  
Santiago V. Luis ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Microfluidic Devices ◽  
Chemical Processes ◽  
Membrane Reactors ◽  
Separation Processes ◽  
Catalytic Systems

This tutorial review highlights representative examples of ionic liquid (IL)-based (bio)catalytic systems integrating reaction and separation, as a tool for the development of sustainable chemical processes (e.g. IL/scCO2 biphasic reactors, membrane reactors, nanodrop systems, microfluidic devices, supported IL phases, sponge-like ILs, etc.).

Distillable ionic liquids for a new multicomponent reaction

2007 ◽  
Vol 79 (11) ◽  
pp. 1869-1877 ◽  
Author(s):  
Anthony E. Rosamilia ◽  
Christopher R. Strauss ◽  
Janet L. Scott
Keyword(s):  
Carbon Dioxide ◽  
Ionic Liquid ◽  
Ionic Liquids ◽  
Multicomponent Reaction ◽  
Reaction Medium ◽  
Building Blocks ◽  
Substituted Anilines ◽  
Reaction Sequence ◽  
Unsaturated Ketones ◽  
Direct Preparation

Adducts of dimethylamine and carbon dioxide form a "distillable ionic liquid" (DIMCARB) that may used as both a reaction medium and catalyst in the direct, atom-economical synthesis of useful synthetic building blocks, such as mono-condensed α,β-unsaturated ketones. The utilization of such building blocks in the synthesis of two new classes of versatile macrocycles, by a sequence of condensation reactions (H2O by-product), is described. Investigation into the mechanism of action of DIMCARB catalysis and observation of an aniline impurity arising from a competing reaction sequence led to development of a new multicomponent reaction for the direct preparation of 2- or 4-substituted anilines. Some of the macrocycles and anilines are, respectively, supramolecular host compounds and ligands for the preparation of metal complexes.

Ionophilic phosphonium-appended carbopalladacycle catalyst for Suzuki–Miyaura and Heck cross-coupling catalysis

2010 ◽  
Vol 88 (1) ◽  
pp. 27-34 ◽  
Author(s):  
Jocelyn J. Tindale ◽  
Paul J. Ragogna
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Catalyst Activity ◽  
Reaction Medium ◽  
Cross Coupling ◽  
Metal Catalyst ◽  
Phosphonium Salts ◽  
Transition Metal Catalyst ◽  
Imidazolium Ionic Liquids ◽  
Liquid Reaction

An ionic liquid, covalently tethered to an efficient transition-metal catalyst in the presence of an ionic liquid reaction medium, can utilize ionophilic interactions to improve catalyst activity, recyclability, and product isolation while decreasing catalyst leaching. Given the greater stability of phosphonium salts in comparison to imidazolium ionic liquids under basic conditions, phosphonium-tagged oxime carbopalladacycle salts were prepared and employed in both Heck and Suzuki–Miyaura reactions. The desired product was obtained in good yields for up to four catalyst cycles in the case of the Suzuki–Miyaura reaction. While taking advantage of the non-volatile nature of ionic liquids, the product was isolated through simple sublimation from the reaction mixture, eliminating issues associated with catalyst leaching, and the remaining ionic liquid solvent–catalyst mixture was ready for further catalysis.

Silica-supported ZnCl2 — A highly active and reusable heterogeneous catalyst for the one-pot synthesis of dihydropyrimidinones–thiones

2007 ◽  
Vol 85 (3) ◽  
pp. 197-201 ◽  
Author(s):  
Raman Gupta ◽  
Monika Gupta ◽  
Satya Paul ◽  
Rajive Gupta
Keyword(s):  
Zinc Chloride ◽  
Biginelli Reaction ◽  
Catalyst Loading ◽  
Reaction Conditions ◽  
One Pot ◽  
Highly Active ◽  
Chloride Catalyst ◽  
Biginelli Compounds ◽  
The One ◽  
Low Catalyst Loading

A novel silica-supported zinc chloride catalyst was prepared and investigated for the Biginelli reaction. The key features of the catalyst include rapid reaction with 100% conversion of aldehyde, good catalyst recyclability, and high stability under the reaction conditions (passes hot filtration test successfully). A low catalyst loading (12 mol% of ZnCl2) was required to achieve a quantitative reaction. Other catalysts such as SiO2–AlCl2, SiO2–AlCl2–ZnCl2 were also prepared and their activity was compared with SiO2–ZnCl2 for the Biginelli reaction.Key words: silica gel, zinc chloride, Biginelli compounds, heterogeneous catalysis, reusability.

scholarly journals Ruthenium-Based Catalytic Systems Incorporating a Labile Cyclooctadiene Ligand with N-Heterocyclic Carbene Precursors for the Atom-Economic Alcohol Amidation Using Amines.

2018 ◽  
Author(s):  
Cheng Chen ◽  
Yang Miao ◽  
Kimmy De Winter ◽  
Hua-Jing Wang ◽  
Patrick Demeyere ◽  
...  
Keyword(s):  
Catalytic System ◽  
Amide Bond ◽  
Catalyst Loading ◽  
Catalytic Systems ◽  
Carbene Complexes ◽  
Amide Bond Formation ◽  
Highly Active ◽  
Metal Catalyzed ◽  
Ru Species

Transition-metal-catalyzed amide bond formation from alcohols and amines is an atom-economic and eco-friendly route. Herein, we identified a highly active in situ N-heterocyclic carbene (NHC)/ruthenium (Ru) catalytic system for this amide synthesis. Various substrates, including sterically hindered ones, could be directly transformed into the corresponding amides with the catalyst loading as low as 0.25 mol%. In this system, we replaced the p-cymene ligand of the Ru source with a relatively labile cyclooctadiene (cod) ligand so as to more efficiently obtain the corresponding poly-carbene Ru species. Expectedly, the weaker cod ligand could be more easily substituted with multiple mono-NHC ligands. Further HR-MS analyses revealed that two tetra-carbene complexes were probably generated from the in situ catalytic system.

Sign in / Sign up

Export Citation Format

Share Document