Effect of Sulfide Inhibition and Organic Shock Loading on Anaerobic Biofilm Reactors Treating a Low-Temperature, High-Sulfate Wastewater

2009 ◽  
Vol 81 (3) ◽  
pp. 265-288 ◽  
Author(s):  
Heather B. McDonald ◽  
Gene F. Parkin
2020 ◽  
Vol 55 (5) ◽  
pp. 633-642
Author(s):  
I. V. Vlasov ◽  
V. Ye. Yegorushkin ◽  
V. Ye. Panin ◽  
A. V. Panin ◽  
O. B. Perevalova

RSC Advances ◽  
2017 ◽  
Vol 7 (37) ◽  
pp. 22788-22796 ◽  
Author(s):  
Huizhi Hu ◽  
Junguo He ◽  
Huarong Yu ◽  
Jian Liu ◽  
Jie Zhang

The start-up period of biofilm reactors often takes a long time to obtain a mature and stable biofilm, especially at low temperature.


1996 ◽  
Vol 34 (5-6) ◽  
pp. 359-366 ◽  
Author(s):  
Peter Fox ◽  
Venkatraghavan Venkatasubbiah

A pharmaceutical wastewater with a chemical oxygen demand (COD) concentration of 40,000 mg/l and a sulfate concentration of 5,000 mg/l was treated in a anaerobic baffled reactor. Treatment of the wastewater at 10% dilution was effective but at higher influent concentrations sulfide inhibition reduced efficacy of both COD conversion and sulfate conversion. A recycle line with an attached-film biological reactor was inserted into the anaerobic baffled reactor to facilitate biological sulfide oxidation. Recycling anaerobic effluent through a sulfide oxidizing biological system reduced inhibition in the anaerobic reactor by both reducing inhibitory sulfide concentrations within the reactor and by diluting the influent. The major product of the biological oxidation of sulfide by a Thiobacillus species appeared to be elemental sulfur. At an influent wastewater concentration of 40% and a HRT of 1 day, COD removal efficiencies were greater than 50% and the conversion of influent sulfate was greater than 95% with effluent sulfide concentrations of less than 20 mg/l. The major product observed from degradation of isopropyl acetate was acetic acid. Coupled anaerobic/aerobic provided removal of sulfur from the wastewater stream and helped to stabilize the pH in the reactor system.


2014 ◽  
Vol 501-504 ◽  
pp. 2089-2092
Author(s):  
Hai Hong Zhou ◽  
Fang He

A kind of controlled-release carbon source, starch / polyvinyl alcohol blends (SPVA), was used as both carbon source and biofilm supporter in laboratory-scale fluidized-bed biofilm reactors (FBBRs) to remove nitrate from groundwater. Results show: when the influent nitrate concentration was 100 mg-N /L, FBBRs packed with SPVA can effectively remove nitrate from groundwater at the condition of temperature 20 °C, hydraulic resident time (HRT) 4 h. The effluent nitrate can meet with the Chinese drinking water standards at low temperature (15-2 °C) by adjusted the HRT of FBBRs. The denitrification rate declined nonlinearly with the decrease of temperature and changed sharply in the range of 20-15 °Cand 10-5 °C.


2017 ◽  
Vol 83 (8) ◽  
Author(s):  
Xinwei Mao ◽  
Alexandra Polasko ◽  
Lisa Alvarez-Cohen

ABSTRACT In order to elucidate interactions between sulfate reduction and dechlorination, we systematically evaluated the effects of different concentrations of sulfate and sulfide on reductive dechlorination by isolates, constructed consortia, and enrichments containing Dehalococcoides sp. Sulfate (up to 5 mM) did not inhibit the growth or metabolism of pure cultures of the dechlorinator Dehalococcoides mccartyi 195, the sulfate reducer Desulfovibrio vulgaris Hildenborough, or the syntroph Syntrophomonas wolfei. In contrast, sulfide at 5 mM exhibited inhibitory effects on growth of the sulfate reducer and the syntroph, as well as on both dechlorination and growth rates of D. mccartyi. Transcriptomic analysis of D. mccartyi 195 revealed that genes encoding ATP synthase, biosynthesis, and Hym hydrogenase were downregulated during sulfide inhibition, whereas genes encoding metal-containing enzymes involved in energy metabolism were upregulated even though the activity of those enzymes (hydrogenases) was inhibited. When the electron acceptor (trichloroethene) was limiting and an electron donor (lactate) was provided in excess to cocultures and enrichments, high sulfate concentrations (5 mM) inhibited reductive dechlorination due to the toxicity of generated sulfide. The initial cell ratio of sulfate reducers to D. mccartyi (1:3, 1:1, or 3:1) did not affect the dechlorination performance in the presence of sulfate (2 and 5 mM). In contrast, under electron donor limitation, dechlorination was not affected by sulfate amendments due to low sulfide production, demonstrating that D. mccartyi can function effectively in anaerobic microbial communities containing moderate sulfate concentrations (5 mM), likely due to its ability to outcompete other hydrogen-consuming bacteria and archaea. IMPORTANCE Sulfate is common in subsurface environments and has been reported as a cocontaminant with chlorinated solvents at various concentrations. Inconsistent results for the effects of sulfate inhibition on the performance of dechlorination enrichment cultures have been reported in the literature. These inconsistent findings make it difficult to understand potential mechanisms of sulfate inhibition and complicate the interpretation of bioremediation field data. In order to elucidate interactions between sulfate reduction and reductive dechlorination, this study systematically evaluated the effects of different concentrations of sulfate and sulfide on reductive dechlorination by isolates, constructed consortia, and enrichments containing Dehalococcoides sp. This study provides a more fundamental understanding of the competition mechanisms between reductive dechlorination by Dehalococcoides mccartyi and sulfate reduction during the bioremediation process. It also provides insights on the significance of sulfate concentrations on reductive dechlorination under electron donor/acceptor-limiting conditions during in situ bioremediation applications. For example, at a trichloroethene-contaminated site with a high sulfate concentration, proper slow-releasing electron donors can be selected to generate an electron donor-limiting environment that favors reductive dechlorination and minimizes the sulfide inhibition effect.


Biofouling ◽  
1993 ◽  
Vol 6 (4) ◽  
pp. 295-304 ◽  
Author(s):  
Peter A Wilderer ◽  
Isolde Röske ◽  
Annette Ueberschär ◽  
Ludwig Davids

Author(s):  
D. Faulkner ◽  
G.W. Lorimer ◽  
H.J. Axon

It is now generally accepted that meteorites are fragments produced by the collision of parent bodies of asteroidal dimensions. Optical metallographic evidence suggests that there exists a group of iron meteorites which exhibit structures similar to those observed in explosively shock loaded iron. It seems likely that shock loading of meteorites could be produced by preterrestrial impact of their parent bodies as mentioned above.We have therefore looked at the defect structure of one of these meteorites (Trenton) and compared the results with those made on a) an unshocked ‘standard’ meteorite (Canyon Diablo)b) an artificially shocked ‘standard’ meteorite (Canyon Diablo) andc) an artificially shocked specimen of pure α-iron.


Author(s):  
J. M. Galbraith ◽  
L. E. Murr ◽  
A. L. Stevens

Uniaxial compression tests and hydrostatic tests at pressures up to 27 kbars have been performed to determine operating slip systems in single crystal and polycrystal1ine beryllium. A recent study has been made of wave propagation in single crystal beryllium by shock loading to selectively activate various slip systems, and this has been followed by a study of wave propagation and spallation in textured, polycrystal1ine beryllium. An alteration in the X-ray diffraction pattern has been noted after shock loading, but this alteration has not yet been correlated with any structural change occurring during shock loading of polycrystal1ine beryllium.This study is being conducted in an effort to characterize the effects of shock loading on textured, polycrystal1ine beryllium. Samples were fabricated from a billet of Kawecki-Berylco hot pressed HP-10 beryllium.


Sign in / Sign up

Export Citation Format

Share Document