scholarly journals FORMULATION AND EVALUATION OF FLOATING MATRIX TABLETS OF LEVOFLOXACIN HEMIHYDRATE USING HYDROXYPROPYL METHYLCELLULOSE K4M TO TREAT HELICOBACTER PYLORI INFECTION

2018 ◽  
Vol 11 (6) ◽  
pp. 148
Author(s):  
Srinivasa Rao Baratam ◽  
Vijayaratna J
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Linear Regression Method ◽  
In Vitro Drug Release ◽  
Sustained Drug Delivery

Objective: The aim of the study was to develop a floating drug delivery system of levofloxacin (LVF) hemihydrate for sustained drug delivery to improve the extended retention in the stomach, oral bioavailability, and local site-specific action in the stomach. Methods: Preparation of LVF tablets using melt granulation method using hydroxypropyl methylcellulose (HPMC) K4M with sodium bicarbonate as gas generating agent. From LFTA1 to LFTA5, formulations were developed and evaluated for floating properties for swelling characteristics and in vitro drug release studies. In vitro dissolution was carried out using USP II paddle method using 0.1N HCI pH buffer at 50 rpm and samples were measured at 294 nm using ultraviolet-visible spectroscopy. Results: Obtained Fourier-transform infrared charts indicated that there is no positive evidence for the interaction between LVF and ingredients of the optimized formula. In vitro drug release was performed and drug release kinetics were evaluated using the linear regression method and were found to be followed the zero-order release by diffusion controlled release. Optimized formula was found to be LFTA4 with 20% of a polymer with 99.03% of drug release with 12 h of floating time and 32 s floating lag time. Conclusion: Matrix tablets (LFTA4) formulated employing 20% HPMC K4M are best suited to be used for gastroretentive dosage form of LVF.

scholarly journals Formulation and Evaluation of Floating Matrix Tablets of Sacubitril and Valsartan

2019 ◽  
Vol 9 (4-s) ◽  
pp. 298-309
Author(s):  
Sudhakar Pathak ◽  
Harish Pandey ◽  
Sunil Kumar Shah
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Lag Time ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Potential Candidate ◽  
In Vitro Drug Release ◽  
Gastric Emptying Rate ◽  
Floating Tablets

Floating Drug Delivery Systems (FDDS) have a bulk density lower than gastric fluids and thus remain buoyant in the stomach for a prolonged period of time, without affecting the gastric emptying rate. While the system is floating on the gastric contents, the drug is released slowly at a desired rate from the system. These floating tablets mainly prepared for reduction of lag time and release the drug up to 12 hours and may also increase the bioavailability of the drugs by utilizing the drug to full extent avoiding unnecessary frequency of dosing. The purpose of this research was to develop and evaluated floating matrix tablets of sacubitril and valsartan. The floating matrix tablets of sacubitril and valsartan were prepared by direct compression method using altered concentrations of HPMC K4M, HPMC K100M, sodium alginate as polymers and sodium bicarbonate, citric acid as gas generating agent. FTIR, DSC studies conformed that there was no incompatibility between the polymers and the drug. Tablet preformulation parameters were within the pharmacopoeias limit. Tablets were evaluated by different parameters such as weight uniformity, content uniformity, thickness, hardness, in vitro release studies, buoyancy determination and kinetic analysis of dissolution data. The varying concentration of gas generating agent and polymers was found to affect on in-vitro drug release and floating lag time. Tablet showed ≤ 1min lag time, continuance of buoyancy for >12 h. The in-vitro drug release pattern of sacubitril and valsartan optimized floating tablets (F16) was fitted to different kinetic models which showed highest regression (r2 = 0.9838) for Higuchi model. The Optimized formulation (F16) showed no significant change in physical appearance, drug content, floating lag time, in vitro dissolution studies after 75%±5% RH at 40±20C relative humidity for 6 months.  Prepared floating tablets of sacubitril and valsartan may prove to be a potential candidate for safe and effective controlled drug delivery over an extended period of time for gastro retentive drug delivery system.  

scholarly journals DESIGN AND EVALUATION OF INTRAGASTRIC BUOYANT TABLETS OF VENLAFAXINE HYDROCHLORIDE

2017 ◽  
Vol 10 (5) ◽  
pp. 166
Author(s):  
Parasuram Rajam Radhika ◽  
Nishala N ◽  
Kiruthika M ◽  
Sree Iswarya S
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Xanthan Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Methyl Cellulose ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Floating Drug Delivery ◽  
Venlafaxine Hydrochloride

Objective: The present study was undertaken to prolong the release of orally administered drug. The aim is to formulate, develop, and evaluate theintragastric buoyant tablets of venlafaxine hydrochloride, which releases the drug in a sustained manner over a period of 12 hrs. Different formulationswere formulated using the polymers Carbopol 934 P, xanthan gum, hydroxypropyl methylcellulose (HPMC K100M) with varying concentration ofdrug: Polymer ratio of 1:1, 1:1.5, 1:2, in which sodium bicarbonate acts as gas generating agent, and microcrystalline cellulose as a diluent.Methods: The tablets were prepared by direct compression and evaluated for tablet thickness, weight variation, tablet hardness, friability, in vitrobuoyancy test, in vitro drug release and Fourier transform infrared spectroscopy. Formulations were evaluated by floating time, floating lag time and in vitro drug release. Dissolution profiles were subjected for various kinetic treatments to analyze the release pattern of drug.Results: It was found that drug release depends on swelling, erosion, and diffusion, thus following the non-Fickian/anomalous type of diffusion.Formulation F8 was considered as an optimized formulation for gastro retentive floating tablet of venlafaxine hydrochloride. The optimizedformulation showed sustained drug release and remained buoyant on the surface of the medium for more than 12 hrs. As the concentration of HPMCK100M increases in the formulation the drug release rate was found to be decreased. The optimized formulation was subjected for the stability studiesand was found to be stable as no significant change was observed in various evaluated parameters of the formulation.Conclusion: It can be concluded that floating drug delivery system of venlafaxine hydrochloride can be successfully formulated as an approach toincrease gastric residence time, thereby improving its bioavailability.Keywords: Venlafaxine hydrochloride, Intragastric buoyant, Floating drug delivery systems, Hydroxypropyl methyl cellulose K100M, Carbopol 934 P,Xanthan gum.

scholarly journals Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride

2011 ◽  
Vol 61 (2) ◽  
pp. 217-226 ◽  
Author(s):  
Komuravelly Someshwar ◽  
Kalyani Chithaluru ◽  
Tadikonda Ramarao ◽  
K. Kumar
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Floating Tablets ◽  
Gastric Residence Time

Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride Tizanidine hydrochloride is an orally administered prokinetic agent that facilitates or restores motility through-out the length of the gastrointestinal tract. The objective of the present investigation was to develop effervescent floating matrix tablets of tizanidine hydrochloride for prolongation of gastric residence time in order to overcome its low bioavailability (34-40 %) and short biological half life (4.2 h). Tablets were prepared by the direct compression method, using different viscosity grades of hydroxypropyl methylcellulose (HPMC K4M, K15M and K100M). Tablets were evaluated for various physical parameters and floating properties. Further, tablets were studied for in vitro drug release characteristics in 12 hours. Drug release from effervescent floating matrix tablets was sustained over 12 h with buoyant properties. DSC study revealed that there is no drug excipient interaction. Based on the release kinetics, all formulations best fitted the Higuchi, first-order model and non-Fickian as the mechanism of drug release. Optimized formulation (F9) was selected based on the similarity factor (f2) (74.2), dissolution efficiency at 2, 6 and 8 h, and t50 (5.4 h) and was used in radiographic studies by incorporating BaSO4. In vivo X-ray studies in human volunteers showed that the mean gastric residence time was 6.2 ± 0.2 h.

scholarly journals Optimizing the Role of Polymer Blend in the Preparation of Acyclovir Controlled-Release Tablets: An Approach for Better Patient Compliance

2018 ◽  
Author(s):  
Barkat Khan ◽  
Faheem Haider ◽  
Kifayat Shah ◽  
Bushra Uzair ◽  
Kaijian Hou ◽  
...  
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Release Kinetics ◽  
Immediate Release ◽  
Matrix Tablets ◽  
Release Mechanism ◽  
In Vitro Drug Release ◽  
Solubility Study ◽  
Release Data

This study was carried out to formulate and evaluate controlled release (CR) matrix tablets of Acyclovir using combination of hydrophilic and hydrophobic polymers. Acyclovir is a guanine derivative and is its half-life is short hence administered five times a day using immediate release tablets. Six formulations (F1-F6) were developed using Ethocel and Carbopol in equal combinations at drug-polymer (D:P) ratio of 10:5, 10:6, 10:7, 10:8, 10:9 and 10:10. Solubility study was performed using six different solvents. The compatibility studies were carried out using FTIR and DSC. According to USP, Quality Control and dimensional tests (hardness, friability, disintegration and thickness) were executed. In-vitro drug release studies of Acyclovir was carried out in dissolution apparatus using using 0.1 N HCl medium at constant temperature of 37 ± 0.5 ºC. In order to analyze the drug release kinetics, five different mathematical models were applied to the release data. The results showed that there was no incompatibility between drug and polymers. Physical QC tests were found within limits of USP. The release was retarded upto 24 hrs and non-fickian in-vitro drug release mechanism was found. A formulation developed using blend of polymers, showed excellent retention and desired release profiles thus providing absolute control for 24 hrs.

scholarly journals In Vitro Release Kinetics Study of Different Brands of Esomeprazole Sustained Release Tablets Available in Bangladesh

1970 ◽  
Vol 2 (1) ◽  
pp. 27-31 ◽  
Author(s):  
Abul Kalam Lutful Kabir ◽  
Tasbira Jesmeen ◽  
Md Mesbah Uddin Talukder ◽  
Abu Taher Md Rajib ◽  
DM Mizanur Rahman
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
National Brand ◽  
First Order ◽  
Time Period ◽  
Esomeprazole Magnesium

Commercially available four national and four international brands of esomeprazole magnesium sustained release matrix tablets were studied in simulated gastric medium (pH 1.2) for 2 hours and simulated intestinal medium (pH 6.8) for 8 hours time period using USP reference dissolution apparatus. All the national and international brands complied with the USP in-vitro dissolution specifications for drug release in simulated gastric medium. However, one of the national brands (Code: MP-1) and one of the international brands (MP-7) failed to fulfill the official requirement of 80% drug release within 8th hour in simulated intestinal medium. Drug release of that national and international brand were 70.49% and 67.05% respectively within the specified time period, however one national brand (Code: MP-4) released 103.46 % drug within 8th hour in intestinal medium. Drug release profiles were analyzed for zero order, first order and Higuchi equation to reveal the release kinetics perspective of esomeprazole magnesium sustained release matrix tablets. It was found that zero order release kinetics was the predominant release mechanism than first order and Higuchi release kinetics for those brands (Code: MP-2, MP-3, MP-4, MP-5, MP-6 and MP-8) which complied with the USP in vitro dissolution specification for drug releases. On the other hand, first order release kinetics was predominant for one national and also one international non compliant brands (Code: MP-1 and MP-6). Key Words: In vitro dissolution; Sustained release; Market preparations; Kinetic analysis; Esomeprazole; National brand; International brand. DOI: 10.3329/sjps.v2i1.5812Stamford Journal of Pharmaceutical Sciences Vol.2(1) 2009: 27-31

scholarly journals FORMULATION AND EVALUATION OF SUSTAINED RELEASE MATRIX TABLETS OF LEVOSULPIRIDE BY USING NATURAL POLYMER

2017 ◽  
Vol 10 (5) ◽  
pp. 285
Author(s):  
S Shanmugam
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Xanthan Gum ◽  
Diffusion Mechanism ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Release Kinetic ◽  
Natural Polymers ◽  
In Vitro Drug Release

Objective: The objective of the present study was to develop sustained release matrix tablets of levosulpiride by using natural polymers.Method: The tablets were prepared with different ratios of Chitosan, Xanthan gum and Guar gum by wet granulation technique. The solubility study of the levosulpiride was conducted to select a suitable dissolution media for in vitro drug release studies.Results: Fourier transform infrared (FTIR) study revealed no considerable changes in IR peak of levosulpiride and hence no interaction between drug and the excipients. DSC thermograms showed that no drug interaction occurred during the manufacturing process. In vitro dissolution study was carried out for all the formulation and the results compared with marketed sustained release tablet. The drug release from matrix tablets was found to decrease with increase in polymer ratio of Chitosan, Xanthan gum and Guar gum.Conclusion: Formulation LF3 exhibited almost similar drug release profile in dissolution media as that of marketed tablets. From the results of dissolution data fitted to various drug release kinetic equations, it was observed that highest correlation was found for First order, Higuchi’s and Korsmeyer equation, which indicate that the drug release occurred via diffusion mechanism.  Keywords: Levosulpiride, sustained release tablets, natural polymers, in vitro drug release studies 

scholarly journals FORMULATION AND EVALUATION OF RAMIPRIL MOUTH DISSOLVING FILMS

2019 ◽  
pp. 124-129
Author(s):  
Jasvanth E ◽  
Teja D ◽  
Mounika B ◽  
Buchi N Nalluri
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Release Mechanism ◽  
Onset Of Action ◽  
In Vitro Drug Release ◽  
Drug Release Mechanism ◽  
Preparation And Evaluation ◽  
Pvp K30

Objective: The present investigation was aimed at preparation and evaluation of mouth dissolving films (MDFs) of Ramipril to enhance patient convenience, compliance and to improve bioavailability. Methods: MDFs with 0.5% w/w Ramipril were prepared by a solvent casting method using a wet film applicator. The effects of film formers, wetting/solubilizing, saliva stimulating agents and film modifiers on the physicomechanical and in vitro Ramipril release from MDFs were evaluated. Results: The MDFs prepared were transparent, smooth and showed no re-crystallization upon storage. MDFs casted with hydroxypropyl methylcellulose (HPMC) E3 as film former and polyethylene glycol (PEG-400) as plasticizer showed superior Ramipril release rates and good physicomechanical properties when compared to MDFs with E5 and E15 as film formers. HPMC E3 MDFs with polyvinyl pyrrolidone K30 (PVP K30) and sodium lauryl sulphate (SLS) gave superior drug release properties than MDFs without PVP K30 and SLS. The HPMC E3 MDFs with citric acid (CA) as saliva stimulating and xylitol as soothing agent gave significantly superior in vitro drug release than the MDFs without CA and xylitol. Release kinetics data reveals diffusion as a drug release mechanism. Conclusion: From the obtained results, it can be concluded that the administration of Ramipril as MDF may provide a quick onset of action with enhanced oral bioavailability and therapeutic efficacy.

scholarly journals PREPARATION, CHARACTERIZATION AND EVALUATION OF FLOATING MICROPARTICLES OF CIPROFLOXACIN

2016 ◽  
Vol 9 (1) ◽  
pp. 1 ◽  
Author(s):  
Sumit Durgapal ◽  
Sayantan Mukhopadhyay ◽  
Laxmi Goswami
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Solvent Evaporation ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Aqueous Solvent ◽  
Evaporation Technique ◽  
Evaluation Parameters

Objective: The main purpose of this study is to prepare a floating micro articulated drug delivery system of ciprofloxacin by using non-aqueous solvent evaporation technique to increase the bioavailability and therapeutic effectiveness of the drug by prolonging its gastric residence time.Methods: Floating microparticles were prepared by using different low-density polymers such as ethyl cellulose and hydroxypropyl methylcellulose either alone or in combination with the aid of non-aqueous solvent evaporation technique. All the formulated microparticles were subjected to various evaluation parameters such as percentage yield, drug content, drug entrapment, rheological studies, floating characteristics and in vitro drug release studies.Results: Drug-excipient compatibility studies performed with the help of FTIR instrument indicated that there were no interactions. Results revealed that non-aqueous solvent evaporation technique is a suitable technique for the preparation of floating microspheres as most of the formulations were discrete and spherical in shape with a good yield of 65% to 85% and 15 to 22 h of floating duration with 90% of maximum percentage floating capacity shown by formulation FM9. Though, different drug-polymer ratios, as well as a combination of polymers, play a significant role in the variation of overall characteristics of formulations. Based on the data of various evaluation parameters such as particle size analysis, drug content, drug entrapment, rheological studies and in vitro drug release characteristics formulation FM9 was found to fulfil the criteria of ideal floating drug delivery system.Conclusion: Floating microparticles were successfully prepared, and from this study, it can be concluded that the developed floating microspheres of ciprofloxacin can be used for prolonged drug release in the stomach to improve the bioavailability and patient compliance.

scholarly journals Formulation and in-vitro evaluation of ciprofloxacin HCL floating matrix tablets

2020 ◽  
Vol 2 (1) ◽  
pp. 01-06
Author(s):  
Dhulipalla Mounika ◽  
I. Deepika Reddy ◽  
K. Sai Chandralekha ◽  
Kapu Harika ◽  
Ramarao Nadendla ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Controlled Release ◽  
Drug Release ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
In Vitro Dissolution ◽  
Oral Drug ◽  
Prolonged Release ◽  
Evaluation Parameters

Oral drug delivery is the most widely utilized route of administration among all the routes that have been explored for systemic delivery of drugs via pharmaceutical products of different dosage form. Oral route is considered most natural, uncomplicated, convenient and safe due to its ease of administration, patient acceptance and cost-effective manufacturing process. Gastroretentive drug delivery system was developed in pharmacy field and drug retention for a prolonged time has been achieved. The goal of this study was to formulate and in-vitro evaluate Ciprofloxacin HCl controlled release matrix floating tablets. Ciprofloxacin HCl floating matrix tablets were prepared by wet granulation method using two polymers such as HPMC K100M (hydrophilic polymer) and HPMC K15M. All the Evaluation parameters were within the acceptable limits. FTIR spectral analysis showed that there was no interaction between the drug and polymers. In-vitro dissolution study was carried out using USP dissolution test apparatus (paddle type) at 50 rpm. The test was carried out at 37 ± 0.5 0C in 900ml of the 0.1 N HCl buffer as the medium for eight hours. HPMC K100M shows a prolonged release when compared to HPMC K15M. These findings indicated that HPMC K100M can be used to develop novel gastroretentive controlled release drug delivery systems with the double advantage of controlled drug release at GIT pH. On comparing the major criteria in evaluation such as preformulation and in vitro drug release characteristics, the formulation F8 was selected as the best formulation, as it showed the drug content as 99±0.4% and swelling index ratio was 107.14, and in-vitro drug released 61.31±0.65% up to 8 hours. Results indicated that controlled Ciprofloxacin HCl release was directly proportional to the concentration of HPMC K100M and the release of drug followed non-Fickian diffusion. Based on all the above evaluation parameters it was concluded that the formulation batch F8 was found to be best formulation among the formulations F1 to F8 were prepared.

scholarly journals DESIGN AND IN VITRO CHARACTERIZATION OF FLOATING TABLETS OF METRONIDAZOLE

2019 ◽  
pp. 539-544
Author(s):  
CHINNA ESWARAIAH M ◽  
JAYA S
Keyword(s):  
Drug Release ◽  
Xanthan Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Content Uniformity ◽  
Matrix Tablet ◽  
N Value

Objective: The objective of the present study was to formulate the effervescent floating matrix tablet of metronidazole and to evaluate the effect of varying concentrations of hydrophilic polymers on drug release. Methods: Drug excipients interaction was studied by Fourier transform infrared spectrophotometer. The effervescent floating matrix tablets were prepared by direct compression technique using hydroxypropyl methylcellulose (HPMCK4) and xanthan gum alone and in combination as release retardants. Microcrystalline cellulose was used as diluent. Sodium bicarbonate was used as effervescent agent. The prepared matrix tablets were evaluated for their physicochemical parameters such as weight variation, hardness, friability, content uniformity, buoyancy time, and in vitro dissolution. Results: Micromeritic properties and post-compression parameters were evaluated and all the parameters were found within the acceptable limit. The drug release data were subjected to different models to evaluate release kinetics and mechanism of drug release. The matrix tablets prepared with xanthan gum and a mixture of xanthan gum and HPMCK4 were retarded the drug release up to 12 h. The release mechanism of metronidazole was evaluated on the basis of release exponent n value in Peppas model. The n value of the formulations ranged from 0.46 to 0.89 which indicated Case II transport and zero-order release. Conclusion: Floating matrix tablet is the simple, efficient, and economic method to sustain the release of metronidazole to eradicate Helicobacter pylori in peptic ulcer disease.

Sign in / Sign up

Export Citation Format

Share Document