scholarly journals FORMULATION AND EVALUATION OF TRAZODONE HYDROCHLORIDE ORODISPERSIBLE TABLETS

2018 ◽  
Vol 11 ◽  
Author(s):  
Akiladevi D
Keyword(s):  
Drug Release ◽  
Water Absorption ◽  
Content Uniformity ◽  
Direct Compression ◽  
In Vitro Drug Release ◽  
Orodispersible Tablets ◽  
Weight Variation ◽  
Study Results ◽  
Trazodone Hydrochloride

Objective: The objective of the existing research was to develop an oral disintegrating dissolving system as one of the taste masking orodispersible forms together of trazodone hydrochloride tablets using direct compression technique through the use of superdisintegrants together with FlowLac, StarLac, and sodium starch glycolate. Methods: The tablets were formulated using the direct compression approach. The drugs prepared have been evaluated for diverse parameters which include hardness, friability, weight variation, drug content uniformity, water absorption ratio, in vitro drug release, and wetting time. Results: The hardness of all formulations from F1 to F7 proved that the tablet means thickness was nearly uniform in all formulations with the range of 0.520 mm–0.522 mm. Water absorption of prepared formulations was found to be 68.59%–73.21%. Bulk density, tapped density, and friability of the formulations were established within the limits, results of in vitro drug release study showed the drug released between 90.27% and 96.17% at 60 min. Conclusion: The overall study concluded that orodispersible tablets of trazodone hydrochloride have greater dissolution rate and will result in enhanced bioavailability. The taste masked systems are designed to provide better acceptability, improved bioavailability, for chronic patients. The study results revealed that the formulation F6 was contemplated as the top formulation.

scholarly journals Formulation and in vitro evaluation of fast dissolving tablets of metoprolol tartrate

2013 ◽  
Vol 49 (4) ◽  
pp. 783-792
Author(s):  
Mangesh Machhindranath Satpute ◽  
Nagesh Shivaji Tour
Keyword(s):  
Drug Release ◽  
Water Absorption ◽  
Direct Compression ◽  
Metoprolol Tartrate ◽  
Compression Method ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time

The demand for fast dissolving tablets has been growing during the last decade, especially for elderly and children who have swallowing difficulties. In the present work, fast dissolving tablets of metoprolol tartrate, were prepared using sodium starch glycolate, sodium croscarmellose and crospovidone as superdisintegrants, by the direct compression method. The tablets prepared were evaluated for various parameters including weight variation, hardness, friability, in vitro dispersion time, drug-polymer interaction, drug content water absorption ratio, wetting time, in vitro drug release, FTIR and DSC studies. The tablets prepared by the direct compression method had a weight variation in the range of 145 mg to 152 mg, which is below ± 7.5%, a hardness of 3.6 kg/cm² to 4.5 kg/cm², percentage friability of 0.46% to 0.73%, in vitro dispersion time of 18 s to 125 s, drug content uniformity of between 98.12% and 100.03%, a water absorption ratio of 67% to 87%, wetting time of 32 sec. to 64 sec., and an in vitro drug release of 53.92% - 98.82% within 15 min. The IR spectral analysis and DSC study showed no drug interaction with formulation additives of the tablet, and the formulations indicated no significant changes in hardness, friability, drug content or in vitro drug release. Fast dissolving tablets of metoprolol tartrate have enhanced dissolution and will lead to improved bioavailability and more effective therapy.

scholarly journals Development and evaluation of miconazole mucoadhesive tablets for oropharyngeal candidiasis

2017 ◽  
Vol 16 (10) ◽  
pp. 2325-2330
Author(s):  
Qiong Jin ◽  
Wei Chen ◽  
Wan Wu
Keyword(s):  
Drug Release ◽  
Factorial Design ◽  
Hydroxypropyl Methylcellulose ◽  
Extended Period ◽  
Content Uniformity ◽  
Oropharyngeal Candidiasis ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Mucoadhesive Tablets

Purpose: To develop mucoadhesive tablets containing miconazole (MCZ) for the treatment of oropharyngeal candidiasis, using chitosan and hydroxypropyl methylcellulose (HPMC) as mucoadhesive polymers.Methods: Mucoadhesive tablets were formulated and optimized using a 23 factorial design and direct compression method. The independent variables were compression force and concentrations of chitosan and HPMC, while mucoadhesion time and in vitro drug release were dependent variables. Tablet characterization was carried out by evaluating hardness, thickness, tablet weight variation, content uniformity, friability and in vitro drug release at salivary pH (pH 6.8).Results: The tablets showed good mucoadhesion for an extended period (8 h), and their physical characteristics were within acceptable ranges. Drug release ranged from 60.5 % to 80.8 %.Conclusion: These results indicate that the mucoadhesive MCZ tablets formulated with chitosan and HPMC possess potential for the development of therapeutic preparations for management of oropharyngeal candidiasis.Keywords: Miconazole, Oropharyngeal candidiasis, Factorial design, Mucoadhesion, Chitosan, Drug release

scholarly journals FORMULATION AND EVALUATION OF GASTRORETENTIVE TABLETS OF ANTIULCER DRUG

2016 ◽  
Vol 9 (6) ◽  
pp. 48
Author(s):  
Pranali Shivaji Salunkhe
Keyword(s):  
Drug Release ◽  
Extended Period ◽  
Lag Time ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
In Vitro Drug Release ◽  
Gastric Residence Time ◽  
Target Drug ◽  
Weight Variation

ABSTRACTGastroretentive floating drug delivery system is utilised to target drug release in the stomach or to the upper part of intestine. Lansoprazole is proton pump inhibitor intended for oral administration used as antiulcer agent. The present investigation involved formulation and evaluation of Gastroretentive floating tablets of Lansoprazole for prolongation of gastric residence time with a view to deliver the drug at sustained and controlled manner in gastrointestinal tract. The tablets of Lansoprazole were prepared by direct compression method using gas generating agent and different polymer combinations (HPMCK4M, HPMC K100M, Psyllium husk) . The prepared tablets of Lansoprazole were evaluated for hardness, thickness, friability, weight variation, drug content uniformity, buoyancy lag time, total floating time, swelling index, in-vitro dissolution study. The varying concentration of gas generating agent and polymers were found to affect on in-vitro drug release, floating lag time and swelling index. In vitro drug release of floating Gastroretentive tablet of Lansoprazole shown that the formulation F2 was found to be the best formulation as it releases 97.9% Lansoprazole in a controlled manner for extended period of time (upto 12 hrs.)Keywords: Lansoprazole, Gastroretentive, floating tablet, total floating time.

scholarly journals Preparation and in-Vitro Evaluation of Cinnarizine Raft Forming Chewable Tablets

2019 ◽  
pp. 42-53
Keyword(s):  
Drug Release ◽  
Water Solubility ◽  
Content Uniformity ◽  
Compression Method ◽  
Basic Drug ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Chewable Tablets ◽  
Optimum Formula

Cinnarizine is an anti-histaminic drug and is mainly used to treat symptoms accompanying motion sickness like vomiting and dizziness. It has low and variable bioavailability due to its low water solubility. Cinnarizine (weakly basic drug) is formulated as raft forming chewable Tablets to allow its complete dissolution at the stomach to be absorbed at the upper part of small intestine. Raft forming chewable Tablets are formulated by direct compression method using sodium alginate or pectin as raft forming agents. The prepared Tablets were evaluated for their pre and post- compression parameters and they have shown desirable results regarding evaluation of hardness, thickness, % friability, weight variation, content uniformity, raft strength, weight and volume, in addition to in-vitro drug release. Out of all the prepared formulas F1 selected as the optimum formula with 488.1mg raft strength and 92.34% drug release after 24hrs that is promising for the formulation of the raft system.

Formulation and Development of Divalproex Sodium Bi-Layered Tablets using Superdisintegrants and Release Retardant Polymers

2017 ◽  
Vol 10 (2) ◽  
pp. 3669-3675
Author(s):  
Ankit Acharya ◽  
Mohammed Gulzar Ahmed ◽  
Ravi Chaudhari ◽  
Renukaradhya Chitti
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
In Vitro Release ◽  
Immediate Release ◽  
Physical Parameters ◽  
Content Uniformity ◽  
Divalproex Sodium ◽  
In Vitro Drug Release ◽  
Weight Variation

Divalproex sodium is considered as the most important antiepileptic drug and widely used for treatment of epilepsy and bi-polar disorders and prophylaxis of migraine. The present work has been done to formulate bi-layered tablet of Divalproex sodium containing immediate release layer and sustained release layer. The FTIR study revealed that there was no interaction between drug and polymer and combination. Both layers were prepared by wet granulation technique as poor flow property exhibited by pure drug. The immediate release layer was formulated by using superdisintegrants and evaluated for physical parameters, disintegration time and in vitro drug release. The optimized immediate release layer (IF6) with highest in vitro release of 98.11 was selected for bi-layered tablet formulation. HPMC K4M and HPMC K100M polymer were used to retard the drug release from sustained release layer in different proportion and combination and evaluated for physical parameter along with in vitro drug release studies. The optimized sustained release layer (SF8) which extends the Divalproex sodium release more than 18 hrs was selected. Finally, bi-layered tablets were prepared by double compression of selected sustained release layer and immediate release layer of Divalproex sodium. The tablets were evaluated for hardness, thickness, weight variation, friability, drug content uniformity and in vitro drug release. All the physical parameters were in acceptable limit of pharmacopeial specification. The stability studies, shown the bi-layer tablet was stable at 40oC / 75% RH for a period of 3 months.  

scholarly journals FORMULATION AND EVALUATION OF ORODISPERSIBLE TABLETS OF DONEPEZIL HYDROCHLORIDE

2020 ◽  
pp. 45-51
Author(s):  
P. V. KAMALA KUMARI ◽  
Y. SRINIVASA RAO
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Wet Granulation ◽  
High Concentration ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Orodispersible Tablets ◽  
Weight Variation ◽  
Donepezil Hydrochloride

Objective: The present study was aimed to develop the formulation and in vitro evaluation of Orodispersible tablets by wet granulation method using Donepezil HCl as a model drug to enhance patient compliance. Methods: In the wet granulation method, a mixture of microcrystalline cellulose and hydroxypropyl methylcellulose were used along with superdisintegrants, i.e., croscarmellose sodium and crospovidone. The prepared granules were subjected to both pre and post-compression evaluation parameters including; FTIR spectroscopy, micromeritics properties, tablet weight variation, hardness, friability, drug content, disintegration time and in vitro drug release. Results: FTIR studies indicated that there was nointeraction between the drug and the excipients used. The formulation containing high concentration of crospovidone and mixture as the best formulation F2 based on in vitro drug release characteristics of tablet formulation. Conclusion: The results of this work suggested that orodispersible tablets of Donepezil hydrochloride with rapid disintegration time, fast drug release and good hardness can be efficiently and successfully formulated by wet granulation method.

scholarly journals Formulation and Evaluation of Nutraceutical Tablet Using Clove Drugs by Wet Granulation Method

2021 ◽  
Vol 9 (12) ◽  
pp. 1626-1640
Author(s):  
Kawade Swapnali
Keyword(s):  
Drug Release ◽  
The Body ◽  
Wet Granulation ◽  
Direct Compression ◽  
Compression Method ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Natural Drugs ◽  
Evaluation Parameters

Abstract: The objective of present study was to formulate and evaluate the nutraceutical tablets with different combination of herbal drugs. Material and Method: The nutraceutical tablet containing lactose and mannitol as diluent and containing natural drugs like clove and cinnamon which was prepared by direct compression method. The compressed formulations were subject to several evaluation parameters like appearance, thickness, weight variation, hardness and friability. Results: The results of all evaluation parameters of nutraceutical tablet were within the acceptable limit. Pre-compression studies of nutraceutical tablet show satisfactory results. The thickness, hardness, weight variation, and friability of nutraceutical tablet were found to in acceptable range. The in-vitro drug release of eugenol from optimised nutraceutical formulation was found to be 90.23%. Significant results were obtained from present study. Discussion: The finding of current investigation clearly found that the health promotion of the body could be done by nutraceuticals. Keywords: Direct compression, Nutraceutical, Eugenol, In-vitro drug release

Development and Evaluation of Controlled Release Mucoadhesive Tablets of Captopril

1970 ◽  
Vol 9 (3) ◽  
pp. 3318-3329
Author(s):  
Kranthi Kumar Kotta ◽  
L. Srinivas
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Xanthan Gum ◽  
Diffusion Mechanism ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Content Uniformity ◽  
In Vitro Drug Release ◽  
Mucoadhesive Tablets

The present investigation focuses on the development of mucoadhesive tablets of captopril which are designed to prolong the gastric residence time after oral administration. Matrix tablets of captopril were formulated using four mucoadhesive polymers namely guar gum, xanthan gum, HPMC K4M and HPMC K15M and studied for parameters such as weight variation, thickness, hardness, content uniformity, swelling index, mucoadhesive force and in vitro drug release. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M provide slow release of captopril over period of 12 hr and were found suitable for maintenance portion of oral controlled release tablets. The cumulative % of drug release of formulation F9 and F10 were 90 and 92, respectively. In vitro release from these tablets was diffusion controlled and followed zero order kinetics. The ‘n’ values obtained from the pappas-karsemeyer equation suggested that all the formulation showed drug release by non-fickian diffusion mechanism. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M (1:1) were established to be the optimum formulation with optimum bioadhesive force, swelling index & desired invitro drug release. This product was further subjected to stability study, the results of which indicated no significant change with respect to Adhesive strength and in vitro drug release study.

scholarly journals DESIGN AND EVALUATION OF INTRAGASTRIC BUOYANT TABLETS OF VENLAFAXINE HYDROCHLORIDE

2017 ◽  
Vol 10 (5) ◽  
pp. 166
Author(s):  
Parasuram Rajam Radhika ◽  
Nishala N ◽  
Kiruthika M ◽  
Sree Iswarya S
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Xanthan Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Methyl Cellulose ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Floating Drug Delivery ◽  
Venlafaxine Hydrochloride

Objective: The present study was undertaken to prolong the release of orally administered drug. The aim is to formulate, develop, and evaluate theintragastric buoyant tablets of venlafaxine hydrochloride, which releases the drug in a sustained manner over a period of 12 hrs. Different formulationswere formulated using the polymers Carbopol 934 P, xanthan gum, hydroxypropyl methylcellulose (HPMC K100M) with varying concentration ofdrug: Polymer ratio of 1:1, 1:1.5, 1:2, in which sodium bicarbonate acts as gas generating agent, and microcrystalline cellulose as a diluent.Methods: The tablets were prepared by direct compression and evaluated for tablet thickness, weight variation, tablet hardness, friability, in vitrobuoyancy test, in vitro drug release and Fourier transform infrared spectroscopy. Formulations were evaluated by floating time, floating lag time and in vitro drug release. Dissolution profiles were subjected for various kinetic treatments to analyze the release pattern of drug.Results: It was found that drug release depends on swelling, erosion, and diffusion, thus following the non-Fickian/anomalous type of diffusion.Formulation F8 was considered as an optimized formulation for gastro retentive floating tablet of venlafaxine hydrochloride. The optimizedformulation showed sustained drug release and remained buoyant on the surface of the medium for more than 12 hrs. As the concentration of HPMCK100M increases in the formulation the drug release rate was found to be decreased. The optimized formulation was subjected for the stability studiesand was found to be stable as no significant change was observed in various evaluated parameters of the formulation.Conclusion: It can be concluded that floating drug delivery system of venlafaxine hydrochloride can be successfully formulated as an approach toincrease gastric residence time, thereby improving its bioavailability.Keywords: Venlafaxine hydrochloride, Intragastric buoyant, Floating drug delivery systems, Hydroxypropyl methyl cellulose K100M, Carbopol 934 P,Xanthan gum.

scholarly journals FORMULATION AND EVALUATION OF ORAL FAST DISINTEGRATING TABLET OF IBUPROFEN USING TWO SUPER DISINTEGRANTS

2017 ◽  
Vol 9 (4) ◽  
pp. 92
Author(s):  
Hrishav Das Purkayastha ◽  
Bipul Nath
Keyword(s):  
Drug Release ◽  
Magnesium Stearate ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Rapid Release ◽  
Weight Variation ◽  
Fast Disintegrating Tablet

Objective: The aim of the present investigation was to design and evaluate orally disintegrating tablet (ODT) of Ibuprofen, a NSAID drug used for the treatment of arthritis with a view to improve its oral bioavailability. The focus of the current study was to develop ODT of Ibuprofen using super disintegrants for ease of administration and its physicochemical characterization.Methods: Tablets were made from blends by direct compression method. All the ingredients were passed through mesh no. 80. All the ingredients were co-ground in a pestle motor. The resulting blend was lubricated with magnesium stearate and compressed into tablets using the Cadmach single punch (round shaped, 8 mm thick) machine.Results: Physicals parameters of the prepared tablets like Hardness, Weight variation, Friability, thickness, drug content etc. found within the limits. The disintegration time of prepared ODTs was in the range of 45 to 55 seconds. In vitro dispersion time was found to be 22 to 52 seconds which may be attributed to faster uptake of water due to the porous structure formed by super disintegrants. Short disintegration and faster release of ibuprofen were observed with Cross carmellose sodium as compared to sodium starch glycollate.Conclusion: It is concluded that F3 offered the relatively rapid release of Ibuprofen when compared with other formulations. The increase in the concentrations of super disintegrants may lead to increase in the drug release. The formulation prepared with cross carmellose sodium was offered the relatively rapid release of Ibuprofen when compared with other concentrations of both the super disintegrant. 

Sign in / Sign up

Export Citation Format

Share Document