scholarly journals COMPARATIVE ANALYSES OF GEOPHYSICAL LOGS OF RESISTIVITY AS APPLIED TO COAL DEPOSITS

2018 ◽  
Vol 36 (1) ◽  
pp. 19
Author(s):  
Oluwafemi Shekoni Ayodeji ◽  
Paulo Salvadoretti ◽  
João Felipe Coimbra Leite Da Costa ◽  
George Olufunmilayo Gasper ◽  
Douglas Sander Libardi

ABSTRACT. This study compares data sets obtained from three geophysical probes used for measuring rock resistivity. A detailed analysis was carried out to determine which of these probes provides the best option in terms of identification of coal-seam thickness. The resistivity probes used were guard log (GL), single-point resistance (SPR), and induction log (IND) probes. To aid the comparison among the different logs, two other geophysical logs were included: natural gamma (NG) and optical televiewer (OPTV), which helped to identify the coal seams. In the specific case of OPTV, when the situation is favorable, it identifies the coal seams and checks the vertical resolution of the other logs due to its excellent vertical resolution. In this study, analyzed data were obtained from four different coal deposits, namely B3, Calombo, Cerro, and Seival. All the coal deposits mentioned are located in the state of Rio Grande do Sul, Brazil. In all, 13 boreholes with recovered core samples are presented and discussed. The geological descriptions of the 13 boreholes are the main information used as a control parameter in comparisons with the geophysical logs, while OPTV images served as an alternative to verify the vertical resolution of the logs. At the end of the analysis, it was found that the guard log probe tends to offer better performance in the aspect of lithological identification, demonstrating a greater capacity in comparison with the others in terms of vertical resolution. Statistically, it presented the closest estimated value of coal-seam thickness in relation to that provided by geological description of the recovered core samples. Keywords: geophysics, coal, resistivity, OPTV. RESUMO. Este estudo compara registros de perfilagem geofísica obtidos por três sondas que medem a resistividade de litologias. Uma análise detalhada foi feita para determinar qual destas sondas proporciona a melhor opção em termos da identificação de espessuras de camadas de carvão. As sondas de resistividade utilizadas foram: guard log , single point resistance e induction log. Para auxiliar na comparação entre as diferentes sondas, outros dois registros geofísicos foram incluídos: radiação gama natural e optical televiewer (OPTV), os quais ajudaram a identificar os estratos de carvão. No caso específico do OPTV, quando a situação é favorável, ele permite identificar os estratos de carvão e verificar a resolução vertical dos demais registros, em função da excelente resolução vertical. Neste estudo, foram analisados dados obtidos em 4 depósitos de carvão diferentes: B3, Calombo, Cerro e Seival. Todos os depósitos de carvão mencionados situam-se no estado do Rio Grande do Sul – Brasil. Ao todo, 13 furos de sondagem com recuperação de testemunhos são apresentados e discutidos. As descrições geológicas dos 13 furos de sondagem são as informações principais utilizadas como parâmetro de controle nas comparações entre os perfis geofísicos, enquanto que as imagens OPTV serviram como uma alternativa para verificar a resolução vertical dos perfis geofísicos. Ao final das análises, verificou-se que o dispositivo guard log tende a ter o melhor desempenho no aspecto de identificação litológica, demonstrando uma capacidade superior em relação aos demais arranjos em termos de resolução vertical. Estatisticamente, ele apresentou as estimativas de espessurasmais próximas em valor, em relação às espessuras proporcionadas pelas descrições geológicas de testemunhos de sondagem.Palavras-chave: geofísica, carvão, resistividade, OPTV.

2021 ◽  
Vol 1 (2) ◽  
Author(s):  
The Hung KHUONG ◽  
Phuong NGUYEN ◽  
Thi Cuc NGUYEN ◽  
Nhu Sang PHAM ◽  
Danh Tuyen NGUYEN

In northern Vietnam, the Tien Hai area is considered a high potential area of coal deposits. Twohundred fifty-six geochemical coal samples of 13 cores in the Tien Hai area investigate coal seams andcoal deposits to identify the correlation of coal seams. According to the statistical method and clusteranalysis of geochemical samples, the results indicate that the Mg, V, As, Ca, Zn, Cr, Co, K, Na, Sr, Fe,Ge, Re, U, Mo, Th, and Ga elements are good indicator elements of the major and trace elements in coal.Most of them comply with the normal or lognormal distribution rules. Besides, the Yb, Sc, Ho, Er, Tm,Lu, Y, Tb, Pr, Dy, and Sm elements are also good indicator elements for rare earth elements in the region.Therefore, the selected elements are used to identify the correlation of the coal seams in the Tien Hai area.Based on the similarity degree between studied objects, the results of grouping boreholes in coal seamsshow that the correlation of coal seam TV2-11 is suitable and acceptable, the coal seams TV3-6a, TV3-6b, and TV3-6c can be grouped into the coal seam TV3-6. These results present that the models can helpstudy geochemical coal samples and identify the correlation of the coal seams in the Tien Hai area.Additionally, the statistical analysis shows a remarkable degree to determine the correlation of the coalseams. Geochemical coal data can help to evaluate the indicator elements of the major, trace elements,and rare earth elements in coal seams and coal rashing of adjoining and pillar rocks in the Tien Hai area,northern Vietnam.


2014 ◽  
Vol 1046 ◽  
pp. 516-520
Author(s):  
He Yu Zhang ◽  
Fan Lei ◽  
Fei Huang

Coal seam floor contours are one of the most important 8 mine maps, and was usually used for coal mine decision-making. However, the graph, which was expressed as lines, has many disadvantages, including inadequate intuitive, poor visibility, and weak in expression of three-dimensional morphology formation. Thus, the readers have to spend more time to reveal the spatial distribution of coal deposits. According to the coal seam floors contours, and considering the constraints of faults in coal seams, the following steps were implemented to acquire coal seam floor DEM, which are: 1) contours discrete; and 2) interpolation using Inverse Distance Weighted method (IDW). The process was easy-manipulated, and the results could reflect the spatial distribution of coal seams in an objective, intuitively, and strong visibility manner. The method could facilitate and guide the analysis of mine design and coal production.


2020 ◽  
Vol 2020 ◽  
pp. 1-13 ◽  
Author(s):  
Fulian He ◽  
Xiaobin Li ◽  
Wenrui He ◽  
Yongqiang Zhao ◽  
Zhuhe Xu ◽  
...  

Longwall mechanized top coal caving mining (LMTCCM) in extra-thick coal seams has its own characteristics. The law of mining pressure and overlying strata failure height in extra-thick coal seams are much larger than those of medium-thick and thick coal seams. The key stratum structure morphology also has an important influence on the law of overlying strata movement and stability of surrounding rock. Based on the engineering geological conditions, this paper used the method of theoretical analysis and numerical simulation to study the key stratum structure morphology of LMTCCM in extra-thick coal seams. The results show that under the condition of LMTCCM in extra-thick coal seams, the key stratum forms the structure of low cantilever beam and high hinged rock beam. With the increase of coal seam thickness, the breaking position of cantilever beam is closer to the coal wall. Through theoretical calculation, it is obtained that the breaking length of cantilever beam is 31.5 m and the breaking position of cantilever beam is 15.4 m away from coal wall. With the increase of cycle, key strata will undergo the evolution law from the generation of longitudinal cracks to the hinged structure and then to the cantilever beam structure. The breakage of key strata will cause the expansion of longitudinal cracks and the overall synchronous movement of overlying strata. With the increase of coal seam thickness, the distribution of longitudinal cracks will gradually transfer from the upper part of goaf to the deep part of coal body in space and increase in quantity. This research is of great significance for improving the stability of overlying strata and ensuring the safe and efficient mining of extra-thick coal seams.


1989 ◽  
Vol 22 (22) ◽  
pp. 129 ◽  
Author(s):  
MARGOT GUERRA-SOMMER

The present research is an analysis of Cordaitanthales leaves from “Tonstein” associated to a coal seam in Jazida do Faxinal (Rio Bonito Formation, State of Rio Grande do Sul, Brazil). taphocenosis preserved as coalified compression, is primarily composed of foliar organs, with a predominance of Glossopteridales (Glossopteris brasiliensis Guerra-Sommer, Glossopteris similis-intermittens Guerra-Sommer, Glossopteris papillosa Guerra-Sommer, Glossopteris rio-grandensis Guerra-Sommer). There are very few isolated reproductive structures (Plumsteadia sennes Rigby) and seeds (Platycardia sp.). Fragments os sterile fronds, characterized as PTERIDOPHYLLA (Sensu BOREAU & DOUBINGER, 1975), corresponding exclusively to Sphenopteris type (Sphenopteris cf. Sph. Ischavonensis, Sphenopteris sp.), are very seldom represented. Leaves of Cordaitanthales are very important elements, belonging to only one species, Rufloria gondwanensis n. sp. The evidence that the Cordaitanthales found in the association are related, because of their epidermic patterns, to Rufloria Meyen, the typical Angara form, led to some hypothesis. Migration is considere to be the most plausible reason for the presence of this form in the association. This hypothesis is supported by paleographic maps (SMITH et al., 1981) which show, in the Permian, a continental alignment that would render migration possible.


2018 ◽  
Vol 3 (1) ◽  
pp. 19-35
Author(s):  
Hernani Aquini Fernandes Chaves ◽  
René Rodrigues ◽  
Marcus Vinicius Berao Ade

This work analyses organic geochemistry (total organic carbon - TOC, total Sulphur - S and Rock Eval pyrolysis data) and detailed organic petrography results of the Eo-Permian interval (Rio Bonito Formation, Paraná Basin) in the Grande Candiota area, Rio Grande do Sul State (RS), where the largest Brazilian coalfield is located. Samples were collected along the SVH-07 well and in front of the open-pit mine at Seival. The organic petrography analysis allowed to characterize the coals composition and to classify the stage of coalification. The results reveal that the Grande Candiota coals were deposited in a stormy coastal environment. As the samples present high percentage of inorganic material, the Seival coals must be considered more appropriately as coaly shales. The highest percentage of TOC was observed at the base of the coal Seams. The Upper Seam 7(US7) presents the highest average organic matter content and the Lower Candiota Seam (LCS) the lowest one. The sampled coals can be classified as humic coal due to the predominance of vitrinite, followed by liptinite and inertinite maceral groups. Analyzing each coal Seam individually, it is observed that vitrinite and organic carbon contents are higher in the base of Rio Bonito Formation, whereas inertinite and liptinite contents increase upwards. These variations encompassed a parasequence scale whose base is represented by the carbon Seam deposited at higher humidity conditions, whereas the top paleo soils are associated to longer dry periods. Considering the coal Seams as a whole, it is observed an upward decreasing of the vitrinite content and an increase of inertinite and liptinite, as well as the Hydrogen Index values. These data should be related to a retro gradational system in a transgressive context of the Rio Bonito Formation. The significant increase of sulfur content in Banco Louco Seam also suggests a greater influx of seawater into the depositional system. The Hydrogen Index values show that the coal of US7 has the highest volatile ratio. This behavior is related to the higher liptinite group content in these strata, diminishing the calorific power of this coal. Data from the organic petrography analyzes of the Seival coals were compared with those of the Candiota coalfields, for Lower Candiota and Upper Candiota Seams; it is observed that they have a certain similarity. In addition, the Seival coal organic composition was compared with other South Hemisphere Gondwanan coals, for which they have significant differences related to the higher proportions of liptinite and smaller of inertinite. The coalification stage (rank) for the Seival coals, on the basis of the vitrinite reflectance, ranged from peat to a sub-bituminous B type. ResumoEste estudo apresenta os resultados e interpretação de análises geoquímicas do intervalo eopermiano (Formação Rio Bonito) na área de Seival, Estado do Rio Grande do SuI, onde se encontra a maior reserva brasileira de carvão. As amostras foram coletadas no poço SVH-07 e na frente da mina a céu aberto de Seival, Rio Grande do Sul. Foram realizadas análises de petrografia orgânica e classificação do estágio de carbonificação dos carvões, além de análises geoquímicas para determinação dos teores de carbono orgânico total, enxofre total e pirólise "Rock Eval". Os resultados destas análises foram relacionados com o modelo deposicional em ambiente costeiro tempestítico para os carvões de Grande Candiota.Os resultados relevam que os intervalos carbonosos de Seival devem ser, de modo geral, considerados mais apropriadamente como folhelhos carbonosos, uma vez que as amostras apresentam um alto teor de material inorgânica, fruto de intercalações pelíticas carbonosas com lentes de carvão. Os maiores teores de carbono orgânico encontram-se na base das camadas dos carvões. A camada Superior 7 apresenta o teor médio mais elevado de matéria orgânica, enquanto que o menor teor está na camada Candiota inferior. Os carvões foram classificados como húmicos devido à predominancia do grupo maceral da vitrinita, seguindo-se os grupos da liptinita e da inertinita. Considerando-se cada camada de carvão individualmente, observa-se que, normalmente, os teores de carbono orgânico e de vitrinita são mais elevados na base das camadas, enquanto que, em direção ao topo, há um enriquecimento nos conteúdos relativos de inertinita e liptinita. Estas variações enquadram-se numa escala de parassequência, cuja base é representada pela camada de carvão depositada em condições de maior umidade, e o topo contituido por paleossolos, indica a ocorrência de períodos mais secos. Considerando-se as camadas de carvão em seu conjunto, constatou-se que, em direção ao topo, ocorre um decrescimo no conteúdo de vitrinita e uma elevação nos teores relativos de inertinita e liptinita, assim como, nos valores do índice de hidrogênio. Estes resultados estão relacionados com um sistema retrogradacional condizente com o contexto transgressivo da Formação Rio Bonito. Neste sentido, a elevação substancial dos teores de enxofre, a partir da camada Banco Louco, também sugere um maior influxo da água do mar no sistema deposicional. Os valores do índice de hidrogênio mostram que a camada de carvão com a maior proporção de voláteis é a Superior 7, associados aos macerais do grupo da liptinita, o que, consequentemente, diminuiria o poder calorifico deste carvão. Os dados das anáIises organo-petrográficas dos carvões de Seival foram comparados com os da Jazida de Candiota (RS) para as camadas Candiota inferior, Candiota superior; verifica-se que estes apresentam uma certa similaridade principalmente com as duas primeiras camadas. Além disto, a composição orgânica dos carvões de Seival também foi comparada com a de alguns outros carvões gondwânicos do Hemisfério SuI, apresentando diferenças significativas relacionadas a proporções mais elevadas de liptinita e menores de inertinita. A classificação do grau de carbonificação (rank) para os carvões de Seival, com base no poder refletor médio da vitrinita variou de Turfa a sub-betuminoso B.


Author(s):  
Karen Leandra ávila da Silva ◽  
Marcelo Félix Alonso ◽  
Sabrina Feltes de Moura ◽  
Túlio Felipe Verdi Filho

Resumo O monitoramento contínuo da qualidade do ar local é extremamente importante para a gestão ambiental de uma cidade, mas nem sempre viável pelo alto custo dos equipamentos. Por conta disso, investe-se muito na utilização da modelagem numérica no estudo da qualidade do ar, que é altamente dependente de inventários de emissões dos poluentes e seus precursores. Nesse contexto o objetivo deste trabalho foi realizar um estudo da dispersão do monóxido de carbono (CO) na Região Metropolitana de Porto Alegre, no estado do Rio Grande do Sul, utilizando o sistema de modelagem numérica CCATT-BRAMS, com ênfase nas fontes veiculares. Foram analisados dois períodos - janeiro de 2009 e janeiro de 2016 - utilizando-se as informações dos inventários de gases precursores elaborados pela FEPAM para os anos base de 2009 e 2013, respectivamente, distribuídos espacialmente com o auxílio do pré-processador de emissões PREP-CHEM-SRC utilizado pelo CCATT-BRAMS. No geral, as simulações representaram coerentemente os dados observados pela rede de monitoramento, com RMSE abaixo de 0,3 na maioria das estações avaliadas. Análises de sensibilidade também revelaram que, para o período avaliado, aproximadamente 40% da concentração de CO sobre a cidade de Porto Alegre foi devido ao transporte de larga escala, proveniente das cidades localizadas ao norte, dentro da Região Metropolitana.


2019 ◽  
Vol 2 ◽  
pp. 28
Author(s):  
Marcelo Pereira de Barros ◽  
Ana Paula Lima da Silveira ◽  
Bruna Reis Ferreira

As aves destacam-se dentro dos vertebrados por serem um grupo diverso e adaptado a diferentes ambientes, a composição da comunidade de aves de um determinado local é um importante bioindicador ambiental, pois ela reflete alterações recentes ou pretéritas de determinada área. Na Bacia Hidrográfica do Rio dos Sinos, as pressões sobre os remanescentes de ecossistemas naturais são intensas em decorrência da urbanização crescente, do estabelecimento de indústrias e da ampliação das fronteiras agrícolas, esses fatores associados geram a redução e fragmentação de habitats, com impactos irrecuperáveis para a flora e a fauna. Devido à escassez de dados sobre a avifauna do município de Taquara, o presente estudo teve como objetivo levantar informações sobre o grupo, listando as espécies de aves locais. Entre agosto de 2016 e junho de 2017 foram realizadas quatro amostragens mensais em duas áreas rurais do município, totalizando 44 campanhas de observação e 132 horas de esforço amostral. As espécies foram identificadas e classificadas conforme sua frequência de ocorrência mensal, em espécies comuns e raras. Foram registradas 133 espécies distribuídas em 47 famílias, o que representa mais de 20% das espécies ocorrentes para o estado. Ao longo do período amostrado, 90 espécies foram classificadas como comuns e 47 consideradas raras para as áreas pesquisadas.Palavras-chave: Aves. Bacia hidrográfica do Rio dos Sinos. Preservação.ABSTRACTBirds stand out within vertebrates because they are a diverse group adapted to different environments. The composition of the bird community of a certain place is an important environmental bioindicator since it reflects recent or previous environmental disturbances of a certain area. In the Sinos River Basin, environmental pressures on the remnants of natural ecosystems are intense as a result of increasing urbanization, the establishment of industries and expansion of agricultural frontiers which generate habitat reduction and fragmentation with irrecoverable damages on flora and fauna. Due to the scarcity of data on the avifauna of the municipality of Taquara, the present study aimed to gather information and list the species of local birds. Between August 2016 and June 2017, four monthly samplings were carried out in two rural areas of the municipality, totaling 44 observation campaigns and 132 hours of sample effort. The species were identified and classified as common and rare according to their frequency of occurrence. There were 133 species distributed in 47 families, representing more than 20% of the species that occurred in the state. During the sampled period, 90 species were classified as common and 47 were considered rare for the areas surveyed.Keywords: Birds. Hydrographic basin of Sinos River. Preservation.


2019 ◽  
Vol 5 (10) ◽  
pp. 376
Author(s):  
Marcelo Vianna
Keyword(s):  

O presente artigo visa a apresentar o uso de recursos informatizados na produção de uma pesquisa histórica relacionada à formação do Ministério Público do Rio Grande do Sul e os perfis de seus agentes públicos entre os anos de 1930 e 1964. Nosso objetivo é discutir o processo de organização de uma base de dados aplicada para o problema de pesquisa, envolvendo o levantamento de fontes e definição de registros assim como os recursos aplicados na análise de dados. Por fim, serão apresentadas algumas análises a partir dos resultados extraídos da base de dados, de modo a demonstrar as contradições entre o modelo de promotor público defen- dido pela instituição e os indivíduos que nela atuavam.


Sign in / Sign up

Export Citation Format

Share Document