scholarly journals Synthesis and characterization of the Bi2-xHox/2Zr3x/8O3 compounds

2011 ◽  
Vol 47 (2) ◽  
pp. 105-112 ◽  
Author(s):  
P. Sulcová ◽  
P. Bystrzycki ◽  
L. Válek ◽  
M. Trojan
Keyword(s):  
Thermal Analysis ◽  
Metal Ions ◽  
Powder Diffraction ◽  
Synthesis And Characterization ◽  
Inorganic Pigments

A series of novel environmentally inorganic pigments based on Bi2O3 doped by metal ions such as Zr4+ and Ho3+ have been developed and characterized using of methods of thermal analysis, Xray powder diffraction and CIE L

Synthesis and Characterization of Ti, Fe-Doped Mullite-I

2011 ◽  
Vol 217-218 ◽  
pp. 163-168 ◽  
Author(s):  
Lin Xin Tong ◽  
Jin Hong Li ◽  
Jian Cao
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Phase Separation ◽  
Powder Diffraction ◽  
Sol Gel ◽  
Synthesis And Characterization ◽  
Formation Temperature ◽  
Gel Method ◽  
X Ray

A series of gels with 3Al2O3•2SiO2 were prepared by Sol-gel method and heated at several temperatures for 2 h to synthesize Ti, Fe-doped mullite. The powers were characterized by differential thermal analysis (DSC-TG) and X-ray powder diffraction (XRD). Phase separation was promoted by doping both TiO2 and Fe2O3; with increasing the amount of dopant ions the formation temperature of Si-Al spinel decreased and the formation temperature of mullite increased by TiO2 doping but decreased by Fe2O3 doping. The formation temperature of pure mullite was about 1250-1350 °C.

Synthesis and characterization of novel cation exchange adsorbent for the treatment of real samples for metal ions

2012 ◽  
Vol 200-202 ◽  
pp. 426-432 ◽  
Author(s):  
S.A. Nabi ◽  
A.S. Raeissi ◽  
Mohammad Shahadat ◽  
Rani Bushra ◽  
Amjad Mumtaz Khan
Keyword(s):  
Metal Ions ◽  
Cation Exchange ◽  
Synthesis And Characterization ◽  
Real Samples

scholarly journals SYNTHESIS AND CHARACTERIZATION OF TRIAQUATRISULFISOKSAZOL COBALT(II)SULPHATE.nHYDRATE COMPLEX

2010 ◽  
Vol 6 (3) ◽  
pp. 275-279
Author(s):  
Sentot Budi Rahardjo ◽  
Abu Masykur ◽  
Melin Puspitaningrum
Keyword(s):  
Thermal Analysis ◽  
Magnetic Susceptibility ◽  
Electric Conductivity ◽  
Synthesis And Characterization ◽  
Cyclic Voltammograms ◽  
Infra Red

Complex of cobalt(II) with sulfisoxazole (slfs) has been synthesized in 1 : 4 mole ratio of metal to ligands in methanol, the complex formula is [Co(slfs)3(H2O)3]SO4.nH2O. The electric conductivity of the complex in methanol correspond to 1:1 electrolyte. The thermal analysis indicates that complex contain some hydrates. Magnetic Susceptibility measurements show that the complex is paramagnetic with µeff = 4,60(9) BM. Infra red spectra indicates that the primary N-H group coordinated to the center ion, it is signed by a shift of primary N-H group absorption. UV-Vis spectrum appears one peak at λ= 515,5 nm (19.342 cm-1) due to transition peak of 4T1g (F) → 4T2g (P) (ν3) overlay to transition peak of 4T1g(F) → 4A2g(F) (ν2). The value of 10 Dq (Δo) that corresponds to transition 4T1g → 4T2g (n1) is 95,29 kJ.mol-1. Cyclic voltammograms have revealed quasi reversible. The complex probably is octahedral.   Keywords: cobalt(II), sulfisoxazole, complex, paramagnetic, octahedral

Adsorption of Cu2+ Metal Ions on Dithizone-Immobilized Natural Bentonite

2020 ◽  
Vol 840 ◽  
pp. 64-70
Author(s):  
Dian Mira Fadela ◽  
Mudasir Mudasir ◽  
Adhitasari Suratman
Keyword(s):  
Adsorption Isotherm ◽  
Complex Formation ◽  
Metal Ions ◽  
Electrostatic Interaction ◽  
Metal Ion ◽  
Synthesis And Characterization ◽  
Optimum Conditions ◽  
Initial Concentration ◽  
Activated Bentonite

The research of adsorption of Cu2+ metal ion on dithizone-immobilized natural bentonite (DNB) had been carried out. The experiment was begun by the activation of natural bentonite with HCl 4 M and dithizone-immobilized on activated bentonite surface. This study included synthesis and characterization of dithizone-immobilized bentonite and its application in adsorption of Cu2+ metal ions. The type of interaction occurred in the adsorption was tested by sequential desorption. The result showed that dithizone successfully immobilized on activated natural bentonite (ANB). The optimum conditions for Cu2+ metal ions adsorption using dithizone-immobilized natural bentonite are at pH 5; 0.1 g mass of adsorbent, with interaction time 60 min, and the initial concentration of ion at 80 ppm. Kinetics and adsorption isotherm studies suggest that the capacity, of the dithizone-immobilized natural bentonite in adsorbing Cu2+ metal ion is significantly improved compared to activated natural bentonite. The adsorption of Cu2+ metal ions by activated natural bentonite was through several interactions dominated by electrostatic interaction (82%). Otherwise, the interaction of dithizone-immobilized natural bentonite with Cu2+ metal ions in the sequence were dominated by the mechanism of complex formation of (75%). The result shows that the immobilization of dithizone changes the type of electrostatic interaction into complex formation.

Synthesis and Characterization of T12Ba2CaCu2O8 and T12Ba2Ca2Cu3O10

1989 ◽  
Vol 169 ◽  
Author(s):  
Lauren E. H. McMills ◽  
Shu Li ◽  
Zhen Zhang ◽  
Martha Greenblatt
Keyword(s):  
Magnetic Susceptibility ◽  
Powder Diffraction ◽  
Single Phase ◽  
Synthesis And Characterization ◽  
Synthetic Method ◽  
Superconducting Properties ◽  
X Ray ◽  
Preparation Conditions ◽  
The Relationship

AbstractSingle-phase samples of T12Ba2CaCu2O8 and T12Ba2Ca2Cu3O10 have been prepared using a reliable and simple synthetic method. Samples were characterized by x-ray powder diffraction, magnetic susceptibility and four probe resistivity methods. The TcR=0 values for T12Ba2CaCu2O8 ranged from 100 to 105K, whereas those for T12Ba2Ca2Cu3O10 ranged from 96 to 107K. The relationship between the superconducting properties and the various preparation conditions are discussed.

Synthesis and Characterization of a Novel Waterborne Polyurethane Modified by Tung Oil

2014 ◽  
Vol 513-517 ◽  
pp. 251-254 ◽  
Author(s):  
Zheng Xiang Wang ◽  
Ji Tong Yuan ◽  
Qi Long Liu ◽  
Xi Mei Xiao ◽  
Yun Hua Li ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Water Resistance ◽  
Waterborne Polyurethane ◽  
Synthesis And Characterization ◽  
Good Adherence ◽  
Water Contact ◽  
Tung Oil ◽  
Low Surface Energy ◽  
Ft Ir

A novel waterborne polyurethane (WPU) modified by tung oil was prepared with 2,4-tolylene diisocyanate, polyethylene glycol, dimethylol propinic acid, 1,4-butanedilo as main materials via acetone process. The structure of WPU molecule was characterized by FT-IR. Adhesive behavior for non-polar and/or low surface energy soft packing films was studied. Water resistance of films were evaluated by water contact angle and water uptake and thermal properties determined by thermal analysis instruments. The results show that the modified WPU films have good water and heat resistance. Both of modified WPUs or not have good adherence on BOPP films.

Sign in / Sign up

Export Citation Format

Share Document