Factor Market Distortions and the Shape of the Transformation Curve

Econometrica ◽  
1966 ◽  
Vol 34 (3) ◽  
pp. 686 ◽  
Author(s):  
Harry G. Johnson
Keyword(s):  
Economica ◽  
1973 ◽  
Vol 40 (159) ◽  
pp. 299 ◽  
Author(s):  
William M. Scarth ◽  
Robert D. Warne

2019 ◽  
Vol 11 (23) ◽  
pp. 2839 ◽  
Author(s):  
María Victoria Díaz-Galián ◽  
Fernando Perez-Sanz ◽  
Jose David Sanchez-Pagán ◽  
Julia Weiss ◽  
Marcos Egea-Cortines ◽  
...  

Image analysis of developmental processes in plants reveals both growth and organ movement. This study proposes a methodology to study growth and movement. It includes the standard acquisition of internal and external reference points and coordinates, coordinates transformation, curve fitting and the corresponding statistical analysis. Several species with different growth habits were used including Antirrhinum majus, A. linkianum, Petunia x hybrida and Fragaria x ananassa. Complex growth patterns, including gated growth, could be identified using a generalized additive model. Movement, and in some cases, growth, could not be adjusted to curves due to drastic changes in position. The area under the curve was useful in order to identify the initial stage of growth of an organ, and its growth rate. Organs displayed either continuous movements during the day with gated day/night periods of maxima, or sharp changes in position coinciding with day/night shifts. The movement was dependent on light in petunia and independent in F. ananassa. Petunia showed organ movement in both growing and fully-grown organs, while A. majus and F. ananassa showed both leaf and flower movement patterns linked to growth. The results indicate that different mathematical fits may help quantify growth rate, growth duration and gating. While organ movement may complicate image and data analysis, it may be a surrogate method to determine organ growth potential.


Author(s):  
Natasha L. Smith ◽  
Brandon S. Field

This paper describes an integrated laboratory project between separate heat transfer and machine design courses. The project was structured around a Jominy end quench hardenability test. Most of the students participating were simultaneously enrolled in both classes. In the heat transfer class, students were required to model one-dimensional, transient thermal conduction for an end quench geometry of 4140 steel. In machine design, students applied their theoretical temperature profiles to a continuous cooling transformation curve (CCT) of 4140 steel to predict microstructure and matched the theoretical cooling rates with hardenability curves from literature to predict hardness. In laboratory, students then performed an end quench test in accordance with ASTM A255 on four steel rods. By combining activities across the two courses, students developed an appreciation for the interconnectivity of material within the engineering curriculum, and learned that practical applications typically require they employ knowledge from a variety of sources.


2014 ◽  
Vol 556-562 ◽  
pp. 404-407 ◽  
Author(s):  
Zhang Wei Hu ◽  
Guang Xu ◽  
Chen Zhang ◽  
Hai Jiang Hu

The CCT curve of a C-Si-Mn steel was investigated. The hot simulation tests at different cooling rates were conducted on Gleeble-1500 simulator and microstructures were observed. Based on transformation temperatures recorded by dilation curves and microstructures, the CCT curve diagram for tested steel was plotted. The effects of cooling rate on microstructure and transformation temperature were studied. The results provide the theoretical basis for determination of hot processing and heat treatment technology of C-Si-Mn steels.


2017 ◽  
Vol 20 (1) ◽  
pp. 271-278 ◽  
Author(s):  
José Roberto Costa Guimarães ◽  
Paulo Rangel Rios

2010 ◽  
Vol 654-656 ◽  
pp. 310-313
Author(s):  
An Chao Ren ◽  
Yu Ji ◽  
Gui Feng Zhou ◽  
Ze Xi Yuan ◽  
Bin Han ◽  
...  

The dilatation curves of continuous cooling transformation at different cooling rates were determined for U75V rail steel by THERMECMASTOR-Z thermal simulator, and continuous cooling transformation curve was obtained. The influence of cooling rate on microstructure and hardness was studied. The softening behavior after isothermal deformation in the austenite region 850-1000°C but before the second pass was also studied by double-pass compression tests. The results show that the product of austenite decomposition was pearlite when the cooling rate was lower than 10°C. Troostite and martensite were gained at the cooling rate of 10°C•s-1. Only martensite was obtained when the cooling rate was in the range of 10-50°C•s-1. The hardness of the steel increased with the increase of cooling rate. Under the condition of 30% deformation and 3s-1 deformation rate, the relaxation time for completing recrystallization was shorter than 100s when the deformation temperature was higher than 1000°C. When the deformation temperature was lower than 880°C, full recrystallization was difficult to achieve even if the relaxation time was extended.


Sign in / Sign up

Export Citation Format

Share Document