Trajectory Control over Observations in a 3D Bearings-Only Guidance Problem

Author(s):  
Dmitry Emeliyanov ◽  
Evgeny Rubinovich
Author(s):  
Huatao Chen ◽  
Kun Zhao ◽  
Juan L.G. Guirao ◽  
Dengqing Cao

AbstractFor the entry guidance problem of hypersonic gliding vehicles (HGVs), an analytical predictor–corrector guidance method based on feedback control of bank angle is proposed. First, the relative functions between the velocity, bank angle and range-to-go are deduced, and then, the analytical relation is introduced into the predictor–corrector algorithm, which is used to replace the traditional method to predict the range-to-go via numerical integration. To eliminate the phugoid trajectory oscillation, a method for adding the aerodynamic load feedback into the control loop of the bank angle is proposed. According to the quasi-equilibrium gliding condition, the function of the quasi-equilibrium glide load along with the velocity variation is derived. For each guidance period, the deviation between the real-time load and the quasi-equilibrium gliding load is revised to obtain a smooth reentry trajectory. The simulation results indicate that the guidance algorithm can adapt to the mission requirements of different downranges, and it also has the ability to guide the vehicle to carry out a large range of lateral maneuvers. The feedback control law of the bank angle effectively eliminates the phugoid trajectory oscillation and guides the vehicle to complete a smooth reentry flight. The Monte Carlo test indicated that the guidance precision and robustness are good.


2020 ◽  
Vol 12 (6) ◽  
pp. 168781402093046 ◽  
Author(s):  
Lei Shi ◽  
Keqiang Wang ◽  
Ding Feng ◽  
Hong Zhang ◽  
Peng Wang

Lubricant leakage will inevitably occur during the working process of wellbore trajectory control tools. Even including the lubricant compensation system, serious leakage will still cause lacks lubrication of the internal mechanical structure as well as electronic system damaged by external infiltration fluid, especially when it comes to battery sub and other electronic equipment. Seal system leakage prediction method was presented based on the assumption of steady gap flow. It is assumed that there is a constant gap between the lip seal and the rotating shaft, the gap height is determined by oil film thickness, and the length of the gap was determined by the contact analysis using the Mooney–Rivlin constitutive model. The analysis results show that the contact length between the primary seal lip and the rotary shaft is about 0.1 mm under the condition of ensuring the contact between the deputy seal lip and the rotary shaft. The overall lubricant leakage finite element analysis model was established, and the relationship between the internal lubricant pressure of the tool and the total leakage was obtained. The results of analysis indicate that under the internal pressure of 0.03 MPa, the lubricant leakage is approximately 6 mL/h, which was verified by experiments.


2021 ◽  
Author(s):  
Zhen Cai ◽  
Xuzhi Lai ◽  
Min Wu ◽  
Luefeng Chen ◽  
Chengda Lu

2011 ◽  
Vol 44 (1) ◽  
pp. 10836-10841 ◽  
Author(s):  
Neilkunal Panchal ◽  
Martin T. Bayliss ◽  
James F. Whidborne

Sign in / Sign up

Export Citation Format

Share Document