scholarly journals Opus and Session Initiation Protocol Security in Voice over IP (VOIP )

2019 ◽  
Vol 4 (12) ◽  
pp. 27-37 ◽  
Author(s):  
Siddarth Kaul ◽  
Anuj Jain

The purpose of the paper is to clearly elaborate how Opus Codec can be used as Voice over IP or Unified Communication as known Opus is an Audio Codec which is royalty free and most versatile format of Audio Codec the Opus codec is used for Interactive Voice and Multimedia application, Opus codec with WEBRTC (Web Real Time Communication) is a framework based on the Chrome Web Browser the codec behavior is usually effectively utilized under testing conditions for understanding the MOS assessment in comparison to the Opus Codec.The Opus codec is generally a low latency codec used for real time interactive communication the Opus codec replaces both Vorbis and Speex for new applications.

2015 ◽  
Vol 1 (1) ◽  
pp. 37-45
Author(s):  
Irwansyah Irwansyah ◽  
Hendra Kusumah ◽  
Muhammad Syarif

Along with the times, recently there have been found tool to facilitate human’s work. Electronics is one of technology to facilitate human’s work. One of human desire is being safe, so that people think to make a tool which can monitor the surrounding condition without being monitored with people’s own eyes. Public awareness of the underground water channels currently felt still very little so frequent floods. To avoid the flood disaster monitoring needs to be done to underground water channels.This tool is controlled via a web browser. for the components used in this monitoring system is the Raspberry Pi technology where the system can take pictures in real time with the help of Logitech C170 webcam camera. web browser and Raspberry Pi make everyone can control the devices around with using smartphone, laptop, computer and ipad. This research is expected to be able to help the users in knowing the blockage on water flow and monitored around in realtime.


Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3715
Author(s):  
Ioan Ungurean ◽  
Nicoleta Cristina Gaitan

In the design and development process of fog computing solutions for the Industrial Internet of Things (IIoT), we need to take into consideration the characteristics of the industrial environment that must be met. These include low latency, predictability, response time, and operating with hard real-time compiling. A starting point may be the reference fog architecture released by the OpenFog Consortium (now part of the Industrial Internet Consortium), but it has a high abstraction level and does not define how to integrate the fieldbuses and devices into the fog system. Therefore, the biggest challenges in the design and implementation of fog solutions for IIoT is the diversity of fieldbuses and devices used in the industrial field and ensuring compliance with all constraints in terms of real-time compiling, low latency, and predictability. Thus, this paper proposes a solution for a fog node that addresses these issues and integrates industrial fieldbuses. For practical implementation, there are specialized systems on chips (SoCs) that provides support for real-time communication with the fieldbuses through specialized coprocessors and peripherals. In this paper, we describe the implementation of the fog node on a system based on Xilinx Zynq UltraScale+ MPSoC ZU3EG A484 SoC.


Author(s):  
Olivier Jaubert ◽  
Javier Montalt‐Tordera ◽  
Dan Knight ◽  
Gerry J. Coghlan ◽  
Simon Arridge ◽  
...  

Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 689
Author(s):  
Tom Springer ◽  
Elia Eiroa-Lledo ◽  
Elizabeth Stevens ◽  
Erik Linstead

As machine learning becomes ubiquitous, the need to deploy models on real-time, embedded systems will become increasingly critical. This is especially true for deep learning solutions, whose large models pose interesting challenges for target architectures at the “edge” that are resource-constrained. The realization of machine learning, and deep learning, is being driven by the availability of specialized hardware, such as system-on-chip solutions, which provide some alleviation of constraints. Equally important, however, are the operating systems that run on this hardware, and specifically the ability to leverage commercial real-time operating systems which, unlike general purpose operating systems such as Linux, can provide the low-latency, deterministic execution required for embedded, and potentially safety-critical, applications at the edge. Despite this, studies considering the integration of real-time operating systems, specialized hardware, and machine learning/deep learning algorithms remain limited. In particular, better mechanisms for real-time scheduling in the context of machine learning applications will prove to be critical as these technologies move to the edge. In order to address some of these challenges, we present a resource management framework designed to provide a dynamic on-device approach to the allocation and scheduling of limited resources in a real-time processing environment. These types of mechanisms are necessary to support the deterministic behavior required by the control components contained in the edge nodes. To validate the effectiveness of our approach, we applied rigorous schedulability analysis to a large set of randomly generated simulated task sets and then verified the most time critical applications, such as the control tasks which maintained low-latency deterministic behavior even during off-nominal conditions. The practicality of our scheduling framework was demonstrated by integrating it into a commercial real-time operating system (VxWorks) then running a typical deep learning image processing application to perform simple object detection. The results indicate that our proposed resource management framework can be leveraged to facilitate integration of machine learning algorithms with real-time operating systems and embedded platforms, including widely-used, industry-standard real-time operating systems.


Author(s):  
Patrick Dietrich ◽  
Christoph Munkelt ◽  
Kevin Srokos ◽  
Martin Landmann ◽  
Stefan Heist ◽  
...  

2018 ◽  
Vol 5 (12) ◽  
Author(s):  
Paul A Christensen ◽  
Randall J Olsen ◽  
Katherine K Perez ◽  
Patricia L Cernoch ◽  
S Wesley Long

Abstract We implemented a real-time report to distribute respiratory pathogen data for our 8-hospital system to anyone with an Internet connection and a web browser. Real-time access to accurate regional laboratory observation data during an epidemic influenza season can guide diagnostic and therapeutic strategies.


2018 ◽  
Vol 210 ◽  
pp. 01006
Author(s):  
Miguel G. Molina ◽  
Priscila E. Garzón ◽  
Carolina J. Molina ◽  
Juan X. Nicola

With the uprising of Internet of Things (IoT) networks, new applications have taken advantage of this new concept. Having all devices and all people connected 24/7 have several advantages in a variated amount of disciplines. One of them is medicine and the e-health concept. The possibility of having a real time lecture of the vital signs of people can prevent a live threat situation. This paper describes the realization of a device capable of measuring the heart rate of a person and checking for abnormalities that may negatively affect the patient’s well-being. This project will make use of electronic devices known as microcontrollers, specifically from the Arduino family, enabling us to capture data, and, with the help of a network card and a RJ-45 cable, transfer it to a PC and visualize the heart rate in real time over its assigned IP address.


2010 ◽  
Vol 12 (S1) ◽  
Author(s):  
Haris Saybasili ◽  
J Andrew Derbyshire ◽  
Peter Kellman ◽  
Mark A Griswold ◽  
Cengizhan Ozturk ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document