scholarly journals Dye extracted from Costus woodsonii leave as a natural sensitizer for dye-sensitized solar cell

2021 ◽  
Vol 15 (1) ◽  
pp. 58
Author(s):  
Najihah M.Z. ◽  
Winie Tan
Keyword(s):  
Solar Cells ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Ethanol Extract ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Natural Dye ◽  
Dye Sensitized ◽  
Sensitized Solar Cells ◽  
Natural Sensitizer

Current work employs dye extracted from leaves of Costus woodsonii as a new sensitizer for dye-sensitized solar cells (DSSCs). The leave was extracted in three different solvents namely ethanol, methanol, and acetone. Extraction of leaves was carried out by the freezing method. DSSCs with the configuration of TiO2/dye/electrolyte/Pt were assembled. The dyes in DSSCs were Costus woodsonii leaves extracted in methanol, ethanol, and acetone. DSSC with methanol extract of leaves has an efficiency of 0.23 % and short-circuit current density (Jsc) of 0.63 mA cm-2.  DSSC sensitized with ethanol extract of leaves has an efficiency of 0.37 % and Jsc of 0.85 mA cm-2. DSSC sensitized with acetone extract of leaves shows the highest efficiency of 0.48 % and Jsc of 1.35 mA cm-2. The performance of the DSSCs in this work is compared with other natural dye-based DSSCs. The efficiency obtained in this work is better or at par with the works reported by other researchers. Keywords: Natural dye; Costus woodsonii; Leave; Dye-sensitized solar cells

Improved Carbon Counter Electrodes for Dye Sensitized Solar Cells

2007 ◽  
Vol 31 ◽  
pp. 176-178
Author(s):  
Hyeon Seok Lee ◽  
Heon Yong Lee ◽  
S.Y. Ahn ◽  
K.H. Kim ◽  
J.Y. Kwon
Keyword(s):  
Solar Cells ◽  
Surface Morphology ◽  
Conversion Efficiency ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Counter Electrodes ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

We fabricated improved carbon counter electrodes to improve conversion efficiency of dye sensitized solar cells (DSSCs). Unlike conventional carbon counter electrodes, we added small quantity of TiO2 nano powder and used chemical sintering methodology developed by Park’s group to make surface morphology of the electrodes to change. Through these methods, we could observe change of surface morphology of carbon electrodes and influences on short circuit current density (JSC) and conversion efficiency.

scholarly journals Improved conversion efficiency of 10% for solid-state dye-sensitized solar cells utilizing P-type semiconducting CuI and multi-dye consisting of novel porphyrin dimer and organic dyes

2018 ◽  
Vol 6 (45) ◽  
pp. 22508-22512 ◽  
Author(s):  
Naohiko Kato ◽  
Shinya Moribe ◽  
Masahito Shiozawa ◽  
Ryo Suzuki ◽  
Kazuo Higuchi ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solid State ◽  
Organic Dyes ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Dye Sensitized ◽  
P Type ◽  
Sensitized Solar Cells

To realize highly efficient solid-state dye-sensitized solar cells (SDSCs), the absorption range of the dye should be extended to the near-IR range to increase short-circuit current density (Jsc); a high Jsc in turn requires a highly conductive p-type semiconductor.

Approach to tune short-circuit current and open-circuit voltage of dye-sensitized solar cells: π-linker modification and photoanode selection

RSC Advances ◽  
2014 ◽  
Vol 4 (80) ◽  
pp. 42252-42259 ◽  
Author(s):  
Shengbo Zhu ◽  
Zhongwei An ◽  
Xinbing Chen ◽  
Pei Chen ◽  
Qianfeng Liu
Keyword(s):  
Solar Cells ◽  
Current Density ◽  
Open Circuit Voltage ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

The modification of the π-linker of cyclic thiourea functionalized dyes has a significant effect on the short-circuit current density and open-circuit voltage of dye-sensitized solar cells.

scholarly journals Are Alkynyl Spacers in Ancillary Ligands in Heteroleptic Bis(diimine)copper(I) Dyes Beneficial for Dye Performance in Dye-Sensitized Solar Cells?

Molecules ◽  
2020 ◽  
Vol 25 (7) ◽  
pp. 1528 ◽  
Author(s):  
Guglielmo Risi ◽  
Mariia Becker ◽  
Catherine E. Housecroft ◽  
Edwin C. Constable
Keyword(s):  
Solar Cells ◽  
Electrochemical Impedance ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Visible Region ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Ancillary Ligands ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

The syntheses of 4,4′-bis(4-dimethylaminophenyl)-6,6′-dimethyl-2,2′-bipyridine (1), 4,4′-bis(4-dimethylaminophenylethynyl)-6,6′-dimethyl-2,2′-bipyridine (2), 4,4′-bis(4-diphenylaminophenyl)-6,6′-dimethyl-2,2′-bipyridine (3), and 4,4′-bis(4-diphenylaminophenylethynyl)-6,6′-dimethyl-2,2′-bipyridine (4) are reported along with the preparations and characterisations of their homoleptic copper(I) complexes [CuL2][PF6] (L = 1–4). The solution absorption spectra of the complexes exhibit ligand-centred absorptions in addition to absorptions in the visible region assigned to a combination of intra-ligand and metal-to-ligand charge-transfer. Heteroleptic [Cu(5)(Lancillary)]+ dyes in which 5 is the anchoring ligand ((6,6′-dimethyl-[2,2′-bipyridine]-4,4′-diyl)bis(4,1-phenylene))bis(phosphonic acid) and Lancillary = 1–4 have been assembled on fluorine-doped tin oxide (FTO)-TiO2 electrodes in dye-sensitized solar cells (DSCs). Performance parameters and external quantum efficiency (EQE) spectra of the DSCs (four fully-masked cells for each dye) reveal that the best performing dyes are [Cu(5)(1)]+ and [Cu(5)(3)]+. The alkynyl spacers are not beneficial, leading to a decrease in the short-circuit current density (JSC), confirmed by lower values of EQEmax. Addition of a co-absorbent (n-decylphosphonic acid) to [Cu(5)(1)]+ lead to no significant enhancement of performance for DSCs sensitized with [Cu(5)(1)]+. Electrochemical impedance spectroscopy (EIS) has been used to investigate the interfaces in DSCs; the analysis shows that more favourable electron injection into TiO2 is observed for sensitizers without the alkynyl spacer and confirms higher JSC values for [Cu(5)(1)]+.

scholarly journals Improved Performance of Dye-Sensitized Solar Cells Using a Diethyldithiocarbamate-Modified Surface

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
D. M. B. P. Ariyasinghe ◽  
H. M. N. Bandara ◽  
R. M. G. Rajapakse ◽  
K. Murakami ◽  
M. Shimomura
Keyword(s):  
Solar Cells ◽  
Photoelectron Spectroscopy ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Dip Coating ◽  
Short Circuit Current Density ◽  
Dye Sensitized ◽  
Improved Performance ◽  
Sensitized Solar Cells

The surface modification of a TiO2electrode with diethyldithiocarbamate (DEDTC) in dye-sensitized solar cells (DSSCs) was studied. Results from X-ray photoelectron spectroscopy (XPS) indicate that over half of the sulfur atoms become positively charged after the DEDTC treatment of the TiO2surface. DSSCs were fabricated with TiO2electrodes modified by adsorbing DEDTC using a simple dip-coating process. The conversion efficiency of the DSSCs has been optimized to 6.6% through the enhancement of the short-circuit current density ( mA/cm2). This is substantially higher compared to the efficiency of 5.9% ( mA/cm2) for the DSSCs made with untreated TiO2electrodes.

scholarly journals Electrolyte tuning in dye-sensitized solar cells with N-heterocyclic carbene (NHC) iron(II) sensitizers

2018 ◽  
Vol 9 ◽  
pp. 3069-3078 ◽  
Author(s):  
Mariia Karpacheva ◽  
Catherine E Housecroft ◽  
Edwin C Constable
Keyword(s):  
Ionic Liquid ◽  
Solar Cells ◽  
Electrochemical Impedance ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

We demonstrate that the performances of dye-sensitized solar cells (DSCs) sensitized with a previously reported N-heterocyclic carbene iron(II) dye in the presence of chenodeoxycholic acid co-adsorbant, can be considerably improved by altering the composition of the electrolyte while retaining an I−/I3 − redox shuttle. Critical factors are the solvent, presence of ionic liquid, and the use of the additives 1-methylbenzimidazole (MBI) and 4-tert-butylpyridine (TBP). For the electrolyte solvent, 3-methoxypropionitrile (MPN) is preferable to acetonitrile, leading to a higher short-circuit current density (J SC) with little change in the open-circuit voltage (V OC). For electrolytes containing MPN, an ionic liquid and MBI (0.5 M), DSC performance depended on the ionic liquid with 1-ethyl-3-methylimidazolium hexafluoridophosphate (EMIMPF) > 1,2-dimethyl-3-propylimidazolium iodide (DMPII) > 1-butyl-3-methylimidazolium iodide (BMII) ≈ 1-butyl-3-methylimidazolium hexafluoridophosphate (BMIMPF). Omitting the MBI leads to a significant improvement in J SC when the ionic liquid is DMPII, BMII or BMIMPF, but with EMIMPF the removal of the MBI additive results in a dramatic decrease in V OC (542 to 42 mV). For electrolytes containing MPN and DMPII, the effects of altering the MBI concentration have also been investigated. Although the addition of TBP improves V OC, it causes significant decreases in J SC. The best performing DSCs with the NHC-iron(II) dye employ an I−/I3 −-based electrolyte with MPN as solvent, DMPII ionic liquid (0.6 M) with no or 0.01 M MBI; values of J SC = 2.31 to 2.78 mA cm−2, V OC = 292 to 374 mV have been achieved giving η in the range of 0.47 to 0.57% which represents 7.8 to 9.3% relative to an N719 reference DSC set at 100%. Electrochemical impedance spectroscopy has been used to understand the role of the MBI additive in the electrolytes.

scholarly journals Control of Porphyrin Dye Aggregation Using Bis(4-pyridyl)Alkanes in Dye Sensitized Solar Cells

2019 ◽  
pp. 63
Author(s):  
B. Baptayev ◽  
A. Rysbekova ◽  
D. Kalpakov ◽  
A. Aukenova ◽  
D. Mustazheb ◽  
...  
Keyword(s):  
Solar Cells ◽  
Short Circuit ◽  
Photovoltaic Performance ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Cell Efficiency ◽  
Dye Sensitized ◽  
Dye Aggregation ◽  
Sensitized Solar Cells

The aggregation of sensitizer molecules on the surface of photoanode is a serious issue that can affect the photovoltaic performance of dye-sensitized solar cells. Prevention of dye agglomeration, therefore, is critical. Traditional methods of aggregation control are either synthetically challenging or technologically difficult and expensive. In this article, the use of bis(4-pyridyl)alkanes to control porphyrin dye aggregation is presented. Three bis(4-pyridyl)alkanes – bis(4-pyridyl)butane L4, bis(4-pyridyl)octane L8 and bis(4-pyridyl)decane L10 were synthesized. These bis(4-pyridyl)alkane ligands are axially attached to the metallic center of synthesized porphyrin dye P. The complexes was obtained by mixing the solutions of dye P and each ligand (L) in 2:1 ratio 1 h before the soaking step. As a result three cells were prepared: P-L4, P-L8 and P-L10. The performance of these cells were compared with a reference cell which was prepared from porphyrin dye P only. IPCE analysis demonstrated the highest dye load in P-L4 cell which was ascribed to lowered dye aggregation. Photovoltaic analysis showed improved short circuit current density due to suppressed dye aggregation caused by the complexation of the porphyrin dye P with the linker L4. As a result the overall cell efficiency increased to 42% demonstrating the successful utilization of the (4-pyridyl)alkane linker complexes with porphyrin dye.

Sign in / Sign up

Export Citation Format

Share Document