scholarly journals PERUBAHAN SIFAT FISIK DAN STABILITAS DIMENSI KAYU AKIBAT PENGAWETAN MENGGUNAKAN IMPREGNASI KARBONDIOKSIDA

PERENNIAL ◽  
2007 ◽  
Vol 3 (1) ◽  
pp. 1
Author(s):  
Ifa Zanty Wahyuni ◽  
Musrizal Muin ◽  
. Suhasman

The effect of preservative treatment using carbon dioxide as a carrier solvent on wood physical properties and dimensional stability had been observed on three commercial wood species (Agathis sp., Palaquium sp., and Heritiera sp.). For the purpose of the study, wood samples measuring 1,5 (R) x 1,5 (T) x 15 (L) cm were prepared. Treatment was conducted at elevated temperature (50C - 350C) and increased pressure (60 - 80 kgf/cm2) on one occasion with five replicates using two specimens of each wood species for each treatment. The final treatment condition was maintained for three different periods (10, 20, 30 minutes). Results indicated that the physical properties and dimensional stability of the preserved wood were not significantly affected by the application of CO2 impregnation as carrier solvent. Key words: Preservative treatment, Carbon dioxide, Carrier solvent, Wood physical properties, Wood dimensional stability

2017 ◽  
Vol 2 (1) ◽  
pp. 42-45
Author(s):  
Musrizal Muin

A new approach in wood preservative treatment using carbon dioxide (CO2) as a carrier solvent has been developed and evaluated its effect on the physical, mechanical, and biological properties of treated tropical wood. It employs CO2 at various combinations of temperatures and pressures in a treatment vessel at once and is called Multi-Phase Carbon Dioxide (MPCO2) treatment. Three commercial tropical wood species (Agathis sp., Palaquium sp., and Heritiera sp.) measuring 1.5 cm (T) x 1.5 cm (R) x 15 cm (L) were prepared for the treatment with a termiticide (silafluofen). A treatment cycle was performed by loading two specimens of each wood species, applying the temperature of 15⁰C and pressure of 60 kg/cm2, gradually increasing the temperature and pressure, respectively, to 35⁰C and 80 kg/cm2, and releasing the pressure to atmosphere. The treatment was conducted with five replicates. Untreated and treated specimens were then evaluated their physical, mechanical, and biological properties. Results show that the MPCO2treatment significantly enhanced the termite resistance of treated wood without any adverse effects on their physical and mechanical properties.A new approach in wood preservative treatment using carbon dioxide (CO2) as a carrier solvent has been developed and evaluated its effect on the physical, mechanical, and biological properties of treated tropical wood. It employs CO2 at various combinations of temperatures and pressures in a treatment vessel at once and is called Multi-Phase Carbon Dioxide (MPCO2) treatment. Three commercial tropical wood species (Agathis sp., Palaquium sp., and Heritiera sp.) measuring 1.5 cm (T) x 1.5 cm (R) x 15 cm (L) were prepared for the treatment with a termiticide (silafluofen). A treatment cycle was performed by loading two specimens of each wood species, applying the temperature of 15⁰C and pressure of 60 kg/cm2, gradually increasing the temperature and pressure, respectively, to 35⁰C and 80 kg/cm2, and releasing the pressure to atmosphere. The treatment was conducted with five replicates. Untreated and treated specimens were then evaluated their physical, mechanical, and biological properties. Results show that the MPCO2 treatment significantly enhanced the termite resistance of treated wood without any adverse effects on their physical and mechanical properties.


Alloy Digest ◽  
1964 ◽  
Vol 13 (6) ◽  

Abstract UDIMET 41 is a vacuum induction melted precipitation hardening nickel-base alloy having outstanding room and elevated temperature properties. It possesses excellent corrosion and oxidation resistance. It is designed for highly stressed components operating in the 1400-1700 deg F temperature range. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-92. Producer or source: Special Metals Inc..


Alloy Digest ◽  
1958 ◽  
Vol 7 (1) ◽  

Abstract APEX 417 is an aluminum-magnesium casting alloy having high strength and ductility, excellent corrosion resistance and good dimensional stability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-61. Producer or source: Apex Smelting Company.


Alloy Digest ◽  
1998 ◽  
Vol 47 (12) ◽  

Abstract MO-RE 40MA is a fully austenitic heat-resistant alloy for elevated temperature applications. The alloy is microalloyed for creep strength and oxidation resistance. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance. Filing Code: Ni-548. Producer or source: Duraloy Technologies Inc.


Alloy Digest ◽  
1977 ◽  
Vol 26 (8) ◽  

Abstract TECHALLOY Nickel 211 is a nickel-manganese alloy with good elevated-temperature resistance to corrosion by sulfur compounds. When annealed, it is slightly stronger and harder than Techalloy Nickel 200 and is good for structural parts subjected to degassing temperatures. Nickel 211 has low electron emission and is used for such applications as electron tubes and sparkplug electrodes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-248. Producer or source: Techalloy Company Inc..


Alloy Digest ◽  
1978 ◽  
Vol 27 (9) ◽  

Abstract UNIFLUX 70 is a continuous flux-cored welding electrode (wire) for welding in carbon dioxide shielding gas in the flat groove and horizontal fillet positions. It is used widely in shipbuilding and other fabricating industries to weld carbon steel and provides around 82,000 psi tensile strength and around 50 foot-pounds Charpy V-notch impact at 0 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-74. Producer or source: Unicore Inc., United Nuclear Corporation.


Alloy Digest ◽  
1988 ◽  
Vol 37 (3) ◽  

Abstract COMPAX is a chromium-molybdenum shock-resistant tool steel characterized by high toughness, good wear resistance, good through hardening and good dimensional stability during hardening. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on heat treating, machining, joining, and surface treatment. Filing Code: TS-488. Producer or source: Uddeholm Steel Corporation.


Alloy Digest ◽  
1987 ◽  
Vol 36 (12) ◽  

Abstract UHB QRO 80 MICRODIZED is a chromium-molybdenum-vanadium tool steel with improved performance for tooling used at elevated temperature as in forging, extrusion and die casting. It is electro-slag refined. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-486. Producer or source: Uddeholm Aktiebolag.


Alloy Digest ◽  
2003 ◽  
Vol 52 (12) ◽  

Abstract Type 309 (UNS S30900) is an austenitic chromium-nickel stainless steel widely used for elevated-temperature services. It has a good combination of oxidation resistance and corrosion-resisting properties. The alloy is essentially nonmagnetic when annealed and become slightly magnetic when cold worked. It is intended primarily for high-temperature applications at 816 deg C (1500 deg F) or higher where resistance to oxidation and/or corrosion is required. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-896. Producer or source: J & L Specialty Steel Inc.


Sign in / Sign up

Export Citation Format

Share Document