TECHALLOY NICKEL 211

Alloy Digest ◽  
1977 ◽  
Vol 26 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Electron Emission ◽  
Heat Treating ◽  
Manganese Alloy ◽  
Temperature Resistance ◽  
Structural Parts ◽  
Nickel 200 ◽  
Nickel Manganese

Abstract TECHALLOY Nickel 211 is a nickel-manganese alloy with good elevated-temperature resistance to corrosion by sulfur compounds. When annealed, it is slightly stronger and harder than Techalloy Nickel 200 and is good for structural parts subjected to degassing temperatures. Nickel 211 has low electron emission and is used for such applications as electron tubes and sparkplug electrodes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-248. Producer or source: Techalloy Company Inc..

CARPENTER NICKEL 211 ALLOY

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Solid Solution ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Pure Nickel ◽  
Manganese Alloy ◽  
Commercially Pure ◽  
Nickel 200 ◽  
Nickel Manganese

Abstract CARPENTER NICKEL 211 ALLOY is a nickel-manganese alloy that is slightly harder than commercially pure nickel (Nickel 200). It is a solid-solution strengthened alloy. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-361. Producer or source: Carpenter.

NICKEL 211

Alloy Digest ◽  
1968 ◽  
Vol 17 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Sulfur Compounds ◽  
Manganese Alloy ◽  
Spark Plug ◽  
Nickel Manganese

Abstract Nickel 211 is a nickel-manganese alloy recommended for improved resistance to attack by sulfur compounds at elevated temperatures. It is recommended for supports scaled in glass, grid wires in electron tubes, spark plug electrodes, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-132. Producer or source: Huntington Alloy Products Division.

NIMAG 111

Alloy Digest ◽  
1976 ◽  
Vol 25 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Sulfur Compounds ◽  
Good Resistance ◽  
Manganese Alloy ◽  
Nickel Manganese

Abstract NIMAG 111 is a nickel-manganese alloy possessing good resistance to corrosion by sulfur compounds at elevated temperatures. It is recommended for such applications as electron tubes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-231. Producer or source: Spang Industries Inc..

IMPALCO 770

Alloy Digest ◽  
1962 ◽  
Vol 11 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Strength Aluminum Alloy ◽  
Structural Parts

Abstract IMPALCO 770 is a heat treatable, high strength aluminum alloy available in bar form for machining applications. It is recommended for highly stressed structural parts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-120. Producer or source: Imperial Aluminium Company Ltd.

J&L TYPE 309

Alloy Digest ◽  
2003 ◽  
Vol 52 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Good Combination ◽  
Resistance To Oxidation ◽  
Cold Worked ◽  
Specialty Steel

Abstract Type 309 (UNS S30900) is an austenitic chromium-nickel stainless steel widely used for elevated-temperature services. It has a good combination of oxidation resistance and corrosion-resisting properties. The alloy is essentially nonmagnetic when annealed and become slightly magnetic when cold worked. It is intended primarily for high-temperature applications at 816 deg C (1500 deg F) or higher where resistance to oxidation and/or corrosion is required. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-896. Producer or source: J & L Specialty Steel Inc.

SAE 1345

Alloy Digest ◽  
1987 ◽  
Vol 36 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Hand Tools ◽  
Manganese Alloy ◽  
Steel Mills ◽  
Wide Range

Abstract SAE 1345 is a through-hardening, manganese alloy steel with intermediate hardenability. It is most commonly used where good strength is needed but low-to-medium toughness is sufficient. Its wide range of uses in tools and machinery includes hand tools, gears, shafts, bolts and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-425. Producer or source: Alloy steel mills and foundries.

SANICRO 70

Alloy Digest ◽  
1995 ◽  
Vol 44 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Hydrogen Chloride ◽  
Stress Corrosion Cracking ◽  
Chloride Ion ◽  
Heat Treating ◽  
Temperature Resistance

Abstract SANDVIK SANICRO 70 is an austenitic alloy with good high temperature resistance to carburization and nitridation. The alloy is also very resistant to chloride-ion stress-corrosion cracking and to hydrogen chloride. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: Ni-483. Producer or source: Sandvik.

CDC MANGANESE ALLOY No. 720

Alloy Digest ◽  
1954 ◽  
Vol 3 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Fatigue Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Heat Treating ◽  
Manganese Alloy ◽  
Copper Manganese ◽  
Development Corporation

Abstract C.D.C. MANGANESE ALLOY No. 720 is a copper-manganese-nickel alloy that responds to hardening by heat treatment. It has high tensile and fatigue strength, wide hardness range, and excellent corrosion resisting characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-14. Producer or source: Chicago Development Corporation.

NICKEL 200

Alloy Digest ◽  
1962 ◽  
Vol 11 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
Temperature Performance ◽  
Nickel 200

Abstract Nickel-200 is a wrought metal combining excellent mechanical properties with corrosion resistance. It retains its strength to an excellent degree at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-75. Producer or source: Huntington Alloy Products Division.

ALUMINUM 7178

Alloy Digest ◽  
1961 ◽  
Vol 10 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Aluminum Company ◽  
Structural Parts

Abstract Aluminum 7178 is a high strength, heat treatable alloy recommended for highly stressed structural parts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-108. Producer or source: Aluminum Company of America.

Sign in / Sign up

Export Citation Format

Share Document