carbon dioxide co2
Recently Published Documents


TOTAL DOCUMENTS

2397
(FIVE YEARS 1093)

H-INDEX

60
(FIVE YEARS 11)

2022 ◽  
Vol 157 ◽  
pp. 112019
Author(s):  
Noor Haleem ◽  
Alishba Khattak ◽  
Yousuf Jamal ◽  
Masooma Sajid ◽  
Zainab Shahzad ◽  
...  

2022 ◽  
Vol 23 (2) ◽  
pp. 957
Author(s):  
Franziska Steger ◽  
Johanna Reich ◽  
Werner Fuchs ◽  
Simon K.-M. R. Rittmann ◽  
Georg M. Gübitz ◽  
...  

Strategies for depleting carbon dioxide (CO2) from flue gases are urgently needed and carbonic anhydrases (CAs) can contribute to solving this problem. They catalyze the hydration of CO2 in aqueous solutions and therefore capture the CO2. However, the harsh conditions due to varying process temperatures are limiting factors for the application of enzymes. The current study aims to examine four recombinantly produced CAs from different organisms, namely CAs from Acetobacterium woodii (AwCA or CynT), Persephonella marina (PmCA), Methanobacterium thermoautotrophicum (MtaCA or Cab) and Sulphurihydrogenibium yellowstonense (SspCA). The highest expression yields and activities were found for AwCA (1814 WAU mg−1 AwCA) and PmCA (1748 WAU mg−1 PmCA). AwCA was highly stable in a mesophilic temperature range, whereas PmCA proved to be exceptionally thermostable. Our results indicate the potential to utilize CAs from anaerobic microorganisms to develop CO2 sequestration applications.


Sensors ◽  
2022 ◽  
Vol 22 (2) ◽  
pp. 618
Author(s):  
Mizaj Shabil Sha ◽  
Muni Raj Maurya ◽  
Mithra Geetha ◽  
Bijandra Kumar ◽  
Aboubakr M. Abdullah ◽  
...  

Carbon dioxide (CO2) is a greenhouse gas in the atmosphere and scientists are working on converting it to useful products, thereby reducing its quantity in the atmosphere. For converting CO2, different approaches are used, and among them, electrochemistry is found to be the most common and more efficient technique. Current methods for detecting the products of electrochemical CO2 conversion are time-consuming and complex. To combat this, a simple, cost-effective colorimetric method has been developed to detect methanol, ethanol, and formic acid, which are formed electrochemically from CO2. In the present work, the highly efficient sensitive dyes were successfully established to detect these three compounds under optimized conditions. These dyes demonstrated excellent selectivity and showed no cross-reaction with other products generated in the CO2 conversion system. In the analysis using these three compounds, this strategy shows good specificity and limit of detection (LOD, ~0.03–0.06 ppm). A cost-effective and sensitive Internet of Things (IoT) colorimetric sensor prototype was developed to implement these dyes systems for practical and real-time application. Employing the dyes as sensing elements, the prototype exhibits unique red, green, and blue (RGB) values upon exposure to test solutions with a short response time of 2 s. Detection of these compounds via this new approach has been proven effective by comparing them with nuclear magnetic resonance (NMR). This novel approach can replace heavy-duty instruments such as high-pressure liquid chromatography (HPLC), gas chromatography (G.C.), and NMR due to its extraordinary selectivity and rapidity.


Nanomaterials ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 237
Author(s):  
Zhenyao Han ◽  
Hiromi Kurokawa ◽  
Hirofumi Matsui ◽  
Chunlin He ◽  
Kaituo Wang ◽  
...  

In this study, 8% hydrogen (H2) in argon (Ar) and carbon dioxide (CO2) gas nanobubbles was produced at 10, 30, and 50 vol.% of ethanol aqueous solution by the high-speed agitation method with gas. They became stable for a long period (for instance, 20 days), having a high negative zeta potential (−40 to −50 mV) at alkaline near pH 9, especially for 10 vol.% of ethanol aqueous solution. The extended Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory was used to evaluate the nanobubble stability. When the nanobubble in ethanol alkaline aqueous solution changed to an acidic pH of around 5, the zeta potential of nanobubbles was almost zero and the decrease in the number of nanobubbles was identified by the particle trajectory method (Nano site). The collapsed nanobubbles at zero charge were detected thanks to the presence of few free radicals using G-CYPMPO spin trap reagent in electron spin resonance (ESR) spectroscopy. The free radicals produced were superoxide anions at collapsed 8%H2 in Ar nanobubbles and hydroxyl radicals at collapsed CO2 nanobubbles. On the other hand, the collapse of mixed CO2 and H2 in Ar nanobubble showed no free radicals. The possible presence of long-term stable nanobubbles and the absence of free radicals for mixed H2 and CO2 nanobubble would be useful to understand the beverage quality.


Cells ◽  
2022 ◽  
Vol 11 (2) ◽  
pp. 226
Author(s):  
Sabrina Colafarina ◽  
Piero Di Carlo ◽  
Osvaldo Zarivi ◽  
Massimo Aloisi ◽  
Alessandra Di Serafino ◽  
...  

Indoor air pollutants (IAP), which can pose a serious risk to human health, include biological pollutants, nitric oxide (NO), nitrogen dioxide (NO2), volatile organic compounds (VOC), sulfur dioxide (SO2), carbon monoxide (CO), carbon dioxide (CO2), silica, metals, radon, and particulate matter (PM). The aim of our work is to conduct a multidisciplinary study of fine silica particles (<2.5 μm) in the presence or absence of ozone (O3), and evaluate their potential cytotoxicity using MTS, micronucleus, and the comet test in two cell lines. We analyzed A549 (human basal alveolar epithelial cell adenocarcinoma) and Hs27 (human normal fibroblasts) exposed to dynamic conditions by an IRC simulator under ozone flow (120 ppb) and in the presence of silica particles (40 μg/h). The viability of A549 and Hs27 cells at 48 and 72 h of exposure to silica or silica/ozone decreases, except at 72 h in Hs27 treated with silica/ozone. The micronucleus and comet tests showed a significant increase in the number of micronuclei and the % of DNA in the queue, compared to the control, in both lines in all treatments, even if in different cell times/types. We found that silica alone or with more O3 causes more pronounced genotoxic effects in A549 tumor cells than in normal Hs27 fibroblasts.


Catalysts ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 73
Author(s):  
Bowen Jiang ◽  
Xiangyu Yan ◽  
Yong Xu ◽  
Natalya Likhanova ◽  
Heriberto Díaz Velázquez ◽  
...  

As a well-known greenhouse gas, carbon dioxide (CO2) has attracted increasing levels of attention in areas of energy, environment, climate, etc. Notably, CO2 is an abundant, nonflammable, and renewable C1 feedstock in view of chemistry. Therefore, the transformation of CO2 into organic compounds is an extremely attractive research topic in modern green and sustainable chemistry. Among the numerous CO2 utilization methods, carboxylative cycloaddition of CO2 into propargylic alcohols is an ideal route due to the corresponding products, α-alkylidene cyclic carbonates, which are a series of highly functionalized compounds that supply numerous potential methods for the construction of various synthetically and biologically valuable agents. This cyclization reaction has been intensively studied and systematically summarized, in the past years. Therefore, attention has been gradually transferred to produce more derivative compounds. Herein, the tandem reactions of this cyclization with hydration, amination, alcoholysis, and isomerization to synthesize α-hydroxyl ketones, oxazolidinones, carbamates, unsymmetrical carbonates, tetronic acids, ethylene carbonates, etc. were systematically reviewed.


Author(s):  
Kubilay Kurtulus Bastas

Global climate is estimated to change drastically over the next century and the ecosystems will be affected in this changing environment. Plant-associated beneficial microorganisms can stimulate plant growth and increase resistance to biotic and abiotic stresses. Nowadays, the effects of climate change factors such as increased carbon dioxide (CO2), drought and warming on plant-beneficial microorganism interactions are increasingly being investigated in the scope of plant growth and health. Recent studies have shown that high CO2 level has a positive effect on the abundance of mycorrhizal fungi, whereas the effects on plant growth promoting bacteria and endophytic fungi are more variable. Elevated CO2 conditions lead to increased colonization of beneficial fungi. Additionally, the results of increasing CO2 levels, warming and drought, depend upon the plant and the microbial genotype. Also, plant growth promoting microorganisms, especially bacteria, positively affect plants exposed to drought stress. Altered communities of beneficial microorganisms depending on climate changes, might have to compete with different microbial communities and, therefore microbial activities may also get affected. This work presents that climate change is an important factor affecting microorganism and plant interactions, needs to take into consideration the adaptation processes in plants and microorganisms and might require the selection of adapted plant cultivars.


2022 ◽  
Vol 14 (2) ◽  
pp. 666
Author(s):  
Sunil Kumar Sharma ◽  
Swati Mohapatra ◽  
Rakesh Chandmal Sharma ◽  
Sinem Alturjman ◽  
Chadi Altrjman ◽  
...  

Energy-efficient retrofits embrace enhancement of the building envelope through climate control strategies, employment of building-integrated renewable energy technologies, and insulation for a sustainable city. Building envelope improvements with insulation is a common approach, yet decision-making plays an important role in determining the most appropriate envelope retrofit strategy. In this paper, the main objective is to evaluate different retrofit strategies (RS) through a calibrated simulation approach. Based on an energy performance audit and monitoring, an existing building is evaluated on performance levels and improvement potentials with basic energy conservation measures. The considered building is experimentally monitored for a full year, and monitoring data are used in calibrating the simulation model. The validation of the base model is done by comparing the simulation analysis with the experimental investigation, and good agreement is found. Three different retrofit strategies based on Intervention of minor (RS1), Moderate (RS2), and Major (RS3) are analyzed and juxtaposed with the base model to identify the optimal strategy of minimizing energy consumption. The result shows that total energy intensity in terms of the percentage reduction index is about 16.7% for RS1, 19.87 for RS2, and 24.12% for RS3. Hence, RS3 is considered the optimal retrofit strategy and is further simulated for a reduction in carbon dioxide (CO2) emissions and payback investigation. It was found that the annual reduction in CO2 emissions of the building was 18.56%, and the payback period for the investment was 10.6 years.


Materials ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 370
Author(s):  
Hadi Gholamiyan ◽  
Behnam Gholampoor ◽  
Reza Hosseinpourpia

This research investigates the effect of plasma treatment with air, nitrogen (N2), and carbon dioxide (CO2) gases on the performance of waterborne (acrylic) and solvent-borne (polyester) coated fir (Abies alba M.) wood samples. The properties of the plasma-coated samples were analyzed before and after exposure to accelerated weathering and compared with those of untreated and solely treated ones. According to pull-off testing, the coating adhesion of the wood samples was considerably improved by plasma treatment, and obvious differences were observed between different plasma gases. The effect was more pronounced after the weathering test. Similar results were obtained for the abrasion resistance of the samples. The water contact angle measurement illustrated more hydrophilic character in the solely plasma-treated wood in comparison with the untreated wood. The application of coatings, however, strongly improved its hydrophobic character. The performances of waterborne and solvent-borne coatings on plasma-treated wood were comparable, although slightly better values were obtained by the waterborne system. Our results exhibit the positive effect of plasma treatment on coating performances and the increased weather resistance of the waterborne and solvent-borne coating systems on plasma-treated wood.


2022 ◽  
Author(s):  
Dien Wu ◽  
Junjie Liu ◽  
Paul O. Wennberg ◽  
Paul I. Palmer ◽  
Robert R. Nelson ◽  
...  

Abstract. Carbon dioxide (CO2) and air pollutants such as carbon monoxide (CO) are co-emitted by many combustion sources. Previous efforts have combined satellite-based observations of multiple tracers to calculate their emission ratio (ER) for inferring combustion efficiency at regional to city scale. Very few studies have focused on burning efficiency at the sub-city scale or related it to emission sectors using space-based observations. Several factors are important for deriving spatially-resolved ERs from asynchronous satellite measurements including 1) variations in meteorological conditions induced by different overpass times, 2) differences in vertical sensitivity of the retrievals (i.e., averaging kernel profiles), and 3) interferences from the biosphere and biomass burning. In this study, we extended an established emission estimate approach to arrive at spatially-resolved ERs based on retrieved column-averaged CO2 (XCO2) from the Snapshot Area Mapping (SAM) mode of the Orbiting Carbon Observatory-3 (OCO-3) and column-averaged CO from the TROPOspheric Monitoring Instrument (TROPOMI). To evaluate the influence of the confounding factors listed above and further explain the intra-urban variations in ERs, we leveraged a Lagrangian atmospheric transport model and an urban land cover classification dataset and reported ERCO from the sounding level to the overpass- and city- levels. We found that the difference in the overpass times and averaging kernels between OCO and TROPOMI strongly affect the estimated spatially-resolved ERCO. Specifically, a time difference of > 3 hours typically led to dramatic changes in the wind direction and shape of urban plumes and thereby making the calculation of accurate sounding-specific ERCO difficult. After removing those cases from consideration and applying a simple plume shift method when necessary, we discovered significant contrasts in combustion efficiencies between 1) two megacities versus two industry-oriented cities and 2) different regions within a city, based on six to seven nearly-coincident overpasses per city. Results suggest that the combustion efficiency for heavy industry in Los Angeles is slightly lower than its overall city-wide value (< 10 ppb-CO / ppm-CO2). In contrast, ERs related to the heavy industry in Shanghai are found to be much higher than Shanghai’s city-mean and more aligned with city-means of the two industry-oriented Chinese cities (approaching 20 ppb-CO / ppm-CO2). Although investigations based on a larger number of satellite overpasses are needed, our first analysis provides guidance for estimating intra-city gradients in combustion efficiency from future missions, such as those that will map column CO2 and CO concentration simultaneously with high spatiotemporal resolutions.


Sign in / Sign up

Export Citation Format

Share Document