Evaluation of a three-dimensional kinematic model for canine gait analysis

2011 ◽  
Vol 72 (3) ◽  
pp. 416-417
2018 ◽  
Author(s):  
Nathan P. Brown ◽  
Gina E. Bertocci ◽  
Kimberly A. Cheffer ◽  
Dena R. Howland

AbstractBackground: Kinematic gait analysis is an important noninvasive technique used for quantitative evaluation and description of locomotion and other movements in healthy and injured populations. Three dimensional (3D) kinematic analysis offers additional outcome measures including internal-external rotation not characterized using sagittal plane analysis techniques.Methods: The objectives of this study were to 1) develop and evaluate a 3D hind limb multiplane kinematic model for gait analysis in cats using joint coordinate systems, 2) implement and compare two 3D stifle (knee) prediction techniques, and 3) compare flexion-extension determined using the multiplane model to a sagittal plane model. Walking gait was recorded in 3 female adult cats (age = 2.9 years, weight = 3.5 ± 0.2 kg). Kinematic outcomes included flexion-extension, internal-external rotation, and abduction-adduction of the hip, stifle, and tarsal (ankle) joints.Results: Each multiplane stifle prediction technique yielded similar findings. Joint angles determined using markers placed on skin above bony landmarks in vivo were similar to joint angles determined using a feline hind limb skeleton in which markers were placed directly on landmarks ex vivo. Differences in hip, stifle, and tarsal joint flexion-extension were demonstrated when comparing the multiplane model to the sagittal plane model.Conclusions: This multiplane cat kinematic model can predict joint rotational kinematics as a tool that can quantify frontal, transverse, and sagittal plane motion. This model has multiple advantages given its ability to characterize joint internal-external rotation and abduction-adduction. A further, important benefit is greater accuracy in representing joint flexion-extension movements.


2010 ◽  
Vol 71 (10) ◽  
pp. 1118-1122 ◽  
Author(s):  
Yang-Chieh Fu ◽  
Bryan T. Torres ◽  
Steven C. Budsberg

PLoS ONE ◽  
2018 ◽  
Vol 13 (8) ◽  
pp. e0197837 ◽  
Author(s):  
Nathan P. Brown ◽  
Gina E. Bertocci ◽  
Kimberly A. Cheffer ◽  
Dena R. Howland

2009 ◽  
Vol 131 (3) ◽  
Author(s):  
Thomas R. Jenkyn ◽  
Kiersten Anas ◽  
Alexander Nichol

Gait analysis using optical tracking equipment has been demonstrated to be a clinically useful tool for measuring three-dimensional kinematics and kinetics of the human body. However, in current practice, the foot is treated as a single rigid segment that articulates with the lower leg, meaning the motions of the joints of the foot cannot be measured. A multisegment kinematic model of the foot was developed for use in a gait analysis laboratory. The foot was divided into hindfoot, talus, midfoot, and medial and lateral forefoot segments. Six functional joints were defined: Ankle and subtalar joints, frontal and transverse plane motions of the hindfoot relative to midfoot, supination-pronation twist of the forefoot relative to midfoot, and medial longitudinal arch height-to-length ratio. Twelve asymptomatic subjects were tested during barefoot walking with a six-camera optical stereometric system and passive markers organized in triads. Repeatability of reported motions was tested using coefficients of multiple correlation. Ankle and subtalar joint motions and twisting of the forefoot were most repeatable. Hindfoot motions were least repeatable both within subjects and between subjects. Hindfoot and forefoot pronations in the frontal place were found to coincide with dropping of the medial longitudinal arch between early to midstance, followed by supination and rising of the arch in late stance and swing phase. This multisegment foot model overcomes a major shortcoming in current gait analysis practice—the inability to measure motion within the foot. Such measurements are crucial if gait analysis is to remain relevant in orthopaedic and rehabilitative treatment of the foot and ankle.


2016 ◽  
Vol 40 (5) ◽  
pp. 624-635 ◽  
Author(s):  
Robert Needham ◽  
Roozbeh Naemi ◽  
Aoife Healy ◽  
Nachiappan Chockalingam

Background: Relatively little is known about spine during gait compared to movement analysis of the lower extremities. The trunk is often regarded and analysed as a single rigid segment and there is a paucity of information on inter-segmental movement within the spine and its relationship to pelvis and lower limbs. Objectives: To develop and validate a new multi-segment kinematic model to assess regional three-dimensional movement of the lumbar, lower thoracic and upper thoracic spine during gait. Study design: Observational study. Methods: The study was conducted in two parts: (1) to provide validation measures on the kinematic model built in commercially available software and (2) to apply the marker configuration to the spine at T3, T8 and L3 during gait analysis on 10 healthy male volunteers. Results: Proposed model revealed excellent concurrent validation measures between an applied input angle to the recorded output angle from the kinematic model. A high reliability was observed during gait analysis, both during a single session and between sessions for all participants. Conclusion: The thoracic region of the spine should not be modelled as a single rigid segment and the proposed three-dimensional cluster is reliable and repeatable to assess the inter-segmental movement of the spine. Clinical relevance Reliable kinematic data can be collected using the three-dimensional cluster technique, thus, allowing researchers to accurately distinguish between movement patterns of healthy individuals to those with a clinical condition, and provide confidence in data acquisition during the monitoring process of an implemented rehabilitation intervention programme.


2020 ◽  
Vol 81 ◽  
pp. 281-282
Author(s):  
S. Pitarch-Corresa ◽  
C. Herrera-Ligero ◽  
J.Y. Torres-Villanueva ◽  
E. Medina-Ripoll ◽  
F. Parra-González ◽  
...  

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yuezong Wang ◽  
Jinghui Liu ◽  
Mengfei Guo ◽  
LiuQIan Wang

Purpose A three-dimensional (3D) printing error simulation approach is proposed to analyze the influence of tilted vertical beams on the 3D printing accuracy. The purpose of this study is to analyze the influence of such errors on printing accuracy and printing quality for delta-robot 3D printer. Design/methodology/approach First, the kinematic model of a delta-robot 3D printer with an ideal geometric structure is proposed by using vector analysis. Then, the normal kinematic model of a nonideal delta-robot 3D robot with tilted vertical beams is derived based on the above ideal kinematic model. Finally, a 3D printing error simulation approach is proposed to analyze the influence of tilted vertical beams on the 3D printing accuracy. Findings The results show that tilted vertical beams can indeed cause 3D printing errors and further influence the 3D printing quality of the final products and that the 3D printing errors of tilted vertical beams are related to the rotation angles of the tilted vertical beams. The larger the rotation angles of the tilted vertical beams are, the greater the geometric deformations of the printed structures. Originality/value Three vertical beams and six horizontal beams constitute the supporting parts of the frame of a delta-robot 3D printer. In this paper, the orientations of tilted vertical beams are shown to have a significant influence on 3D printing accuracy. However, the effect of tilted vertical beams on 3D printing accuracy is difficult to capture by instruments. To reveal the 3D printing error mechanisms under the condition of tilted vertical beams, the error generation mechanism and the quantitative influence of tilted vertical beams on 3D printing accuracy are studied by simulating the parallel motion mechanism of a delta-robot 3D printer with tilted vertical beams.


Sign in / Sign up

Export Citation Format

Share Document