scholarly journals Effect of Shot Peening on the Rotating Bending Fatigue Strength of Piano Wires

1974 ◽  
Vol 23 (248) ◽  
pp. 398-403
Author(s):  
Nobuo MIYAGAWA ◽  
Mikio MUKOYAMA ◽  
Akira ONO
Keyword(s):  
Fatigue Strength ◽  
Shot Peening ◽  
Bending Fatigue ◽  
Rotating Bending Fatigue ◽  
Rotating Bending ◽  
Bending Fatigue Strength

High Cycle Fatigue Behavior of Thermally Oxidized Ti6Al4V Alloy

2007 ◽  
Vol 561-565 ◽  
pp. 2179-2182 ◽  
Author(s):  
Mehmet Cingi ◽  
Onur Meydanoglu ◽  
Hasan Guleryuz ◽  
Murat Baydogan ◽  
Huseyin Cimenoglu ◽  
...  
Keyword(s):  
Fatigue Strength ◽  
Yield Strength ◽  
Thermal Oxidation ◽  
Fatigue Behavior ◽  
Surface Hardness ◽  
Ti6al4v Alloy ◽  
Bending Fatigue ◽  
Rotating Bending Fatigue ◽  
Rotating Bending ◽  
Bending Fatigue Strength

In this study, the effect of thermal oxidation on the high cycle rotating bending fatigue behavior of Ti6Al4V alloy was investigated. Oxidation, which was performed at 600°C for 60 h in air, considerably improved the surface hardness and particularly the yield strength of the alloy without scarifying the tensile ductility. Unfortunately, the rotating bending fatigue strength at 5x106 cycles decreased from about 610 MPa to about 400 MPa upon oxidation. Thus, thermal oxidation leaded a reduction in the fatigue strength of around 34%, while improving the surface hardness (HV0.1) and yield strength 85 % and 36 %, respectively.

Rotating Bending Fatigue Strength and Fracture Mode of Shot Peened Materials under Various Conditions

2003 ◽  
Vol 2003 (0) ◽  
pp. 281-282 ◽  
Author(s):  
Eikyou BO ◽  
Kenji KANAZAWA ◽  
Ryuji IKEDA ◽  
Keiichi SATO ◽  
Akira TANGE
Keyword(s):  
Fatigue Strength ◽  
Fracture Mode ◽  
Bending Fatigue ◽  
Rotating Bending Fatigue ◽  
Rotating Bending ◽  
Bending Fatigue Strength

Improvement of Fatigue Strength of Aluminum Alloy by Cavitation Shotless Peening

2002 ◽  
Vol 124 (2) ◽  
pp. 135-139 ◽  
Author(s):  
Hitoshi Soyama ◽  
Kenichi Saito ◽  
Masumi Saka
Keyword(s):  
Aluminum Alloy ◽  
Fatigue Strength ◽  
Shot Peening ◽  
High Speed ◽  
Bending Fatigue ◽  
Hydraulic Machinery ◽  
Bending Fatigue Test ◽  
Rotating Bending Fatigue ◽  
Rotating Bending ◽  
Cavitation Shotless Peening

Cavitation impact, which normally produces severe damage in hydraulic machinery, can be used to modify surfaces in the same way as shot peening. Cavitation impact enables the surface of a material to be peened without the use of shot, thus it is called cavitation shotless peening. As there are no solid body collisions occurring in this peening process, the roughness of the peened surface should be less than that produced by shot peening. This characteristic makes it suitable for peening soft metals. In order to demonstrate the improvement of the fatigue strength of aluminum alloy by this process, specimens were subjected to the process, and then tested in a rotating bending fatigue test. Cavitation impacts were produced and controlled by using a submerged high speed water jet with cavitation, i.e., a cavitating jet. It was revealed that the fatigue strength of an aluminum alloy specimen treated by this peening process was 50% stronger than that of a specimen without peening.

Sign in / Sign up

Export Citation Format

Share Document