scholarly journals Updating Geospatial Data by Creating a High Resolution Digital Surface Model

2018 ◽  
Vol 8 (2) ◽  
pp. 51-58 ◽  
Author(s):  
Iuliana Adriana Cuibac Picu
Keyword(s):  
Laser Scanning ◽  
Smart Cities ◽  
Geographic Information ◽  
Geospatial Data ◽  
Aerial Images ◽  
Aerial Photographs ◽  
Planning System ◽  
Surface Model ◽  
Digital Surface Model ◽  
Digital Terrain

Abstract Smart Cities are no longer just an aspiration, they are a necessity. For a city to be smart, accurate data collection or improvement the existing ones is needed, also an infrastructure that allows the integration of heterogeneous geographic information and sensor networks at a common technological point. Over the past two decades, laser scanning technology, also known as LiDAR (Light Detection and Ranging), has become a very important measurement method, providing high accuracy data and information on land topography, vegetation, buildings, and so on. Proving to be a great way to create Digital Terrain Models. The digital terrain model is a statistical representation of the terrain surface, including in its dataset the elements on its surface, such as construction or vegetation. The data use in the following article is from the LAKI II project “Services for producing a digital model of land by aerial scanning, aerial photographs and production of new maps and orthophotomaps for approximately 50 000 sqKm in 6 counties: Bihor, Arad, Hunedoara, Alba, Mures, Harghita including the High Risk Flood Zone (the border area with the Republic of Hungary in Arad and Bihor)”, which are obtained through LiDAR technology with a point density of 8 points per square meter. The purpose of this article is to update geospatial data with a higher resolution digital surface model and to demonstrate the differences between a digital surface models obtain by aerial images and one obtain by LiDAR technology. The digital surface model will be included in the existing geographic information system of the city Marghita in Bihor County, and it will be used to help develop studies on land use, transport planning system and geological applications. It could also be used to detect changes over time to archaeological sites, to create countur lines maps, flight simulation programs, or other viewing and modelling applications.

scholarly journals METHODS FOR THE UPDATE AND VERIFICATION OF FOREST SURFACE MODEL

2016 ◽  
Vol XLI-B4 ◽  
pp. 51-54
Author(s):  
M. Rybansky ◽  
M. Brenova ◽  
P. Zerzan ◽  
J. Simon ◽  
T. Mikita
Keyword(s):  
Laser Scanning ◽  
Digital Terrain Model ◽  
Geographic Location ◽  
Canopy Height ◽  
Aerial Photographs ◽  
Surface Model ◽  
Vegetation Growth ◽  
Terrain Model ◽  
Digital Terrain ◽  
Pulse Echo

The digital terrain model (DTM) represents the bare ground earth's surface without any objects like vegetation and buildings. In contrast to a DTM, Digital surface model (DSM) represents the earth's surface including all objects on it. The DTM mostly does not change as frequently as the DSM. The most important changes of the DSM are in the forest areas due to the vegetation growth. Using the LIDAR technology the canopy height model (CHM) is obtained by subtracting the DTM and the corresponding DSM. The DSM is calculated from the first pulse echo and DTM from the last pulse echo data. The main problem of the DSM and CHM data using is the actuality of the airborne laser scanning. <br><br> This paper describes the method of calculating the CHM and DSM data changes using the relations between the canopy height and age of trees. To get a present basic reference data model of the canopy height, the photogrammetric and trigonometric measurements of single trees were used. Comparing the heights of corresponding trees on the aerial photographs of various ages, the statistical sets of the tree growth rate were obtained. These statistical data and LIDAR data were compared with the growth curve of the spruce forest, which corresponds to a similar natural environment (soil quality, climate characteristics, geographic location, etc.) to get the updating characteristics.

scholarly journals METHODS FOR THE UPDATE AND VERIFICATION OF FOREST SURFACE MODEL

2016 ◽  
Vol XLI-B4 ◽  
pp. 51-54
Author(s):  
M. Rybansky ◽  
M. Brenova ◽  
P. Zerzan ◽  
J. Simon ◽  
T. Mikita
Keyword(s):  
Laser Scanning ◽  
Digital Terrain Model ◽  
Geographic Location ◽  
Canopy Height ◽  
Aerial Photographs ◽  
Surface Model ◽  
Vegetation Growth ◽  
Terrain Model ◽  
Digital Terrain ◽  
Pulse Echo

The digital terrain model (DTM) represents the bare ground earth's surface without any objects like vegetation and buildings. In contrast to a DTM, Digital surface model (DSM) represents the earth's surface including all objects on it. The DTM mostly does not change as frequently as the DSM. The most important changes of the DSM are in the forest areas due to the vegetation growth. Using the LIDAR technology the canopy height model (CHM) is obtained by subtracting the DTM and the corresponding DSM. The DSM is calculated from the first pulse echo and DTM from the last pulse echo data. The main problem of the DSM and CHM data using is the actuality of the airborne laser scanning. &lt;br&gt;&lt;br&gt; This paper describes the method of calculating the CHM and DSM data changes using the relations between the canopy height and age of trees. To get a present basic reference data model of the canopy height, the photogrammetric and trigonometric measurements of single trees were used. Comparing the heights of corresponding trees on the aerial photographs of various ages, the statistical sets of the tree growth rate were obtained. These statistical data and LIDAR data were compared with the growth curve of the spruce forest, which corresponds to a similar natural environment (soil quality, climate characteristics, geographic location, etc.) to get the updating characteristics.

scholarly journals IMG2nDSM: Height Estimation from Single Airborne RGB Images with Deep Learning

2021 ◽  
Vol 13 (12) ◽  
pp. 2417
Author(s):  
Savvas Karatsiolis ◽  
Andreas Kamilaris ◽  
Ian Cole
Keyword(s):  
Deep Learning ◽  
State Of The Art ◽  
Aerial Imagery ◽  
Aerial Images ◽  
Surface Model ◽  
Large Area ◽  
Digital Terrain ◽  
Terrain Models ◽  
Architectural Features ◽  
Rgb Images

Estimating the height of buildings and vegetation in single aerial images is a challenging problem. A task-focused Deep Learning (DL) model that combines architectural features from successful DL models (U-NET and Residual Networks) and learns the mapping from a single aerial imagery to a normalized Digital Surface Model (nDSM) was proposed. The model was trained on aerial images whose corresponding DSM and Digital Terrain Models (DTM) were available and was then used to infer the nDSM of images with no elevation information. The model was evaluated with a dataset covering a large area of Manchester, UK, as well as the 2018 IEEE GRSS Data Fusion Contest LiDAR dataset. The results suggest that the proposed DL architecture is suitable for the task and surpasses other state-of-the-art DL approaches by a large margin.

scholarly journals Automated Generation of Digital Terrain Model using Point Clouds of Digital Surface Model in Forest Area

2011 ◽  
Vol 3 (5) ◽  
pp. 845-858 ◽  
Author(s):  
Kande R.M.U. Bandara ◽  
Lal Samarakoon ◽  
Rajendra P. Shrestha ◽  
Yoshikazu Kamiya
Keyword(s):  
Digital Terrain Model ◽  
Point Clouds ◽  
Forest Area ◽  
Surface Model ◽  
Digital Surface Model ◽  
Automated Generation ◽  
Terrain Model ◽  
Digital Terrain

scholarly journals MULTISPECTRAL AIRBORNE LASER SCANNING FOR AUTOMATED MAP UPDATING

2016 ◽  
Vol XLI-B3 ◽  
pp. 323-330 ◽  
Author(s):  
Leena Matikainen ◽  
Juha Hyyppä ◽  
Paula Litkey
Keyword(s):  
Change Detection ◽  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Sensor Technology ◽  
Classification Error ◽  
Surface Model ◽  
Airborne Laser ◽  
Map Updating

During the last 20 years, airborne laser scanning (ALS), often combined with multispectral information from aerial images, has shown its high feasibility for automated mapping processes. Recently, the first multispectral airborne laser scanners have been launched, and multispectral information is for the first time directly available for 3D ALS point clouds. This article discusses the potential of this new single-sensor technology in map updating, especially in automated object detection and change detection. For our study, Optech Titan multispectral ALS data over a suburban area in Finland were acquired. Results from a random forests analysis suggest that the multispectral intensity information is useful for land cover classification, also when considering ground surface objects and classes, such as roads. An out-of-bag estimate for classification error was about 3% for separating classes asphalt, gravel, rocky areas and low vegetation from each other. For buildings and trees, it was under 1%. According to feature importance analyses, multispectral features based on several channels were more useful that those based on one channel. Automatic change detection utilizing the new multispectral ALS data, an old digital surface model (DSM) and old building vectors was also demonstrated. Overall, our first analyses suggest that the new data are very promising for further increasing the automation level in mapping. The multispectral ALS technology is independent of external illumination conditions, and intensity images produced from the data do not include shadows. These are significant advantages when the development of automated classification and change detection procedures is considered.

scholarly journals THE POSSIBILITY OF USING IMAGES OBTAINED FROM THE UAS IN CADASTRAL WORKS

2016 ◽  
Vol XLI-B1 ◽  
pp. 909-915 ◽  
Author(s):  
Z. Kurczynski ◽  
K. Bakuła ◽  
M. Karabin ◽  
M. Kowalczyk ◽  
J. S. Markiewicz ◽  
...  
Keyword(s):  
Image Matching ◽  
Bundle Adjustment ◽  
Aerial Photographs ◽  
Surface Model ◽  
Digital Surface Model ◽  
Reference Field ◽  
Alternative Source ◽  
Dense Image ◽  
Low Altitude ◽  
Very High

Updating the cadastre requires much work carried out by surveying companies in countries that have still not solved the problem of updating the cadastral data. In terms of the required precision, these works are among the most accurate. This raises the question: to what extent may modern digital photogrammetric methods be useful in this process? The capabilities of photogrammetry have increased significantly after the introduction of digital aerial cameras and digital technologies. For the registration of cadastral objects, i.e., land parcels’ boundaries and the outlines of buildings, very high-resolution aerial photographs can be used. The paper relates an attempt to use an alternative source of data for this task - the development of images acquired from UAS platforms. Multivariate mapping of cadastral parcels was implemented to determine the scope of the suitability of low altitude photos for the cadastre. In this study, images obtained from UAS with the GSD of 3 cm were collected for an area of a few square kilometres. Bundle adjustment of these data was processed with sub-pixel accuracy. This led to photogrammetric measurements being carried out and the provision of an orthophotomap (orthogonalized with a digital surface model from dense image matching of UAS images). Geometric data related to buildings were collected with two methods: stereoscopic and multi-photo measurements. Data related to parcels’ boundaries were measured with monoplotting on an orthophotomap from low-altitude images. As reference field surveying data were used. The paper shows the potential and limits of the use of UAS in a process of updating cadastral data. It also gives recommendations when performing photogrammetric missions and presents the possible accuracy of this type of work.

scholarly journals UAV AERIAL SURVEY: ACCURACY ESTIMATION FOR AUTOMATICALLY GENERATED DENSE DIGITAL SURFACE MODEL AND ORTHOTHOTO PLAN

2016 ◽  
Vol XLI-B6 ◽  
pp. 155-159
Author(s):  
M. A. Altyntsev ◽  
S. A. Arbuzov ◽  
R. A. Popov ◽  
G. V. Tsoi ◽  
M. O. Gromov
Keyword(s):  
Survey Data ◽  
Laser Scanning ◽  
Aerial Survey ◽  
Surface Model ◽  
Model Generation ◽  
Digital Surface Model ◽  
Reliable Criterion ◽  
Accuracy Estimation ◽  
Survey Accuracy ◽  
Digital Orthophoto

A dense digital surface model is one of the products generated by using UAV aerial survey data. Today more and more specialized software are supplied with modules for generating such kind of models. The procedure for dense digital model generation can be completely or partly automated. Due to the lack of reliable criterion of accuracy estimation it is rather complicated to judge the generation validity of such models. One of such criterion can be mobile laser scanning data as a source for the detailed accuracy estimation of the dense digital surface model generation. These data may be also used to estimate the accuracy of digital orthophoto plans created by using UAV aerial survey data. The results of accuracy estimation for both kinds of products are presented in the paper.

scholarly journals Photogrammetric surveying forests and woodlands with UAVs: techniques for automatic removal of vegetation and digital terrain model production for hydrological applications

2019 ◽  
Vol 7 (1) ◽  
pp. 1-20
Author(s):  
Fotis Giagkas ◽  
Petros Patias ◽  
Charalampos Georgiadis
Keyword(s):  
Vegetation Type ◽  
Digital Terrain Model ◽  
Point Clouds ◽  
Aerial Images ◽  
Surface Model ◽  
Terrain Model ◽  
Vegetation Height ◽  
Digital Terrain ◽  
Dense Point ◽  
Height Model

The purpose of this study is the photogrammetric survey of a forested area using unmanned aerial vehicles (UAV), and the estimation of the digital terrain model (DTM) of the area, based on the photogrammetrically produced digital surface model (DSM). Furthermore, through the classification of the height difference between a DSM and a DTM, a vegetation height model is estimated, and a vegetation type map is produced. Finally, the generated DTM was used in a hydrological analysis study to determine its suitability compared to the usage of the DSM. The selected study area was the forest of Seih-Sou (Thessaloniki). The DTM extraction methodology applies classification and filtering of point clouds, and aims to produce a surface model including only terrain points (DTM). The method yielded a DTM that functioned satisfactorily as a basis for the hydrological analysis. Also, by classifying the DSM–DTM difference, a vegetation height model was generated. For the photogrammetric survey, 495 aerial images were used, taken by a UAV from a height of ∼200 m. A total of 44 ground control points were measured with an accuracy of 5 cm. The accuracy of the aerial triangulation was approximately 13 cm. The produced dense point cloud, counted 146 593 725 points.

scholarly journals BUILDING OUTLINE EXTRACTION FROM AERIAL IMAGERY AND DIGITAL SURFACE MODEL WITH A FRAME FIELD LEARNING FRAMEWORK

2021 ◽  
Vol XLIII-B2-2021 ◽  
pp. 487-493
Author(s):  
X. Sun ◽  
W. Zhao ◽  
R. V. Maretto ◽  
C. Persello
Keyword(s):  
Deep Learning ◽  
Semantic Segmentation ◽  
Aerial Images ◽  
Surface Model ◽  
Digital Surface Model ◽  
Frame Field ◽  
Learning Framework ◽  
Elevation Data ◽  
3D Information ◽  
Direction Information

Abstract. Deep learning-based semantic segmentation models for building delineation face the challenge of producing precise and regular building outlines. Recently, a building delineation method based on frame field learning was proposed by Girard et al. (2020) to extract regular building footprints as vector polygons directly from aerial RGB images. A fully convolution network (FCN) is trained to learn simultaneously the building mask, contours, and frame field followed by a polygonization method. With the direction information of the building contours stored in the frame field, the polygonization algorithm produces regular outlines accurately detecting edges and corners. This paper investigated the contribution of elevation data from the normalized digital surface model (nDSM) to extract accurate and regular building polygons. The 3D information provided by the nDSM overcomes the aerial images’ limitations and contributes to distinguishing the buildings from the background more accurately. Experiments conducted in Enschede, the Netherlands, demonstrate that the nDSM improves building outlines’ accuracy, resulting in better-aligned building polygons and prevents false positives. The investigated deep learning approach (fusing RGB + nDSM) results in a mean intersection over union (IOU) of 0.70 in the urban area. The baseline method (using RGB only) results in an IOU of 0.58 in the same area. A qualitative analysis of the results shows that the investigated model predicts more precise and regular polygons for large and complex structures.

Sign in / Sign up

Export Citation Format

Share Document