scholarly journals Investigation of Phase Pattern Modulation for Digital Fringe Projection Profilometry

2020 ◽  
Vol 20 (1) ◽  
pp. 43-49
Author(s):  
Cheng-Yang Liu ◽  
Chung-Yi Wang
Keyword(s):  
Three Dimensional ◽  
Phase Shifting ◽  
Fringe Projection ◽  
Depth Range ◽  
Digital Fringe Projection ◽  
Great Possibility ◽  
Fringe Patterns ◽  
Pattern Modulation ◽  
Profile Reconstruction ◽  
Fringe Projection Profilometry

AbstractThe fringe projection profilometry with sinusoidal patterns based on phase-shifting algorithms is commonly distorted by the nonlinear intensity response of commercial projector. In order to solve this issue, sinusoidal width modulation is presented to generate binary sinusoidal patterns for defocusing the projection. However, the residual errors in the phase maps are usually notable for highly accurate three-dimensional shape measurements. In this paper, we propose the fringe patterns of the sinusoidal, square, and triangular periodic waveforms with seven-step phase-shifting algorithm to further improve the accuracy of three-dimensional profile reconstruction. The absolute phase values are calculated by using quality guided path unwrapping. We learn that by properly selecting fringe patterns according to the target shape, the undesired harmonics of the measured surface have negligible effect on the phase values. The experiments are presented to verify the imaging performances of three fringe patterns for different testing targets. The triangular fringe patterns are suitable for the shape measurements of complex targets with curved surfaces. The results provide a great possibility for high-accuracy shape measurement technique with wider measuring depth range.

A New Three-Dimensional Profilometer for Surface Profile Measurement Using Digital Fringe Projection and Phase Shifting

2005 ◽  
Vol 295-296 ◽  
pp. 471-476
Author(s):  
Liang Chia Chen ◽  
S.H. Tsai ◽  
Kuang Chao Fan
Keyword(s):  
High Speed ◽  
Structured Light ◽  
Three Dimensional ◽  
Surface Profile ◽  
Phase Shifting ◽  
Fringe Projection ◽  
Surface Measurement ◽  
Profile Measurement ◽  
Digital Fringe Projection ◽  
Fringe Patterns

The development of a three-dimensional surface profilometer using digital fringe projection technology and phase-shifting principle is presented. Accurate and high-speed three-dimensional profile measurement plays a key role in determining the success of process automation and productivity. By integrating a digital micromirror device (DMD) with the developed system, exclusive advantages in projecting flexible and accurate structured-light patterns onto the object surface to be measured can be obtained. Furthermore, the developed system consists of a specially designed micro-projecting optical unit for generating flexibly optimal structured-light to accommodate requirements in terms of measurement range and resolution. Its wide angle image detection design also improves measurement resolution for detecting deformed fringe patterns. This resolves the problem in capturing effective deformed fringe patterns for phase shifting, especially when a coaxial optical layout of a stereomicroscope is employed. Experimental results verified that the maximum error was within a reasonable range of the measured depth. The developed system and the method can provide a useful and effective tool for 3D full field surface measurement ranging from µm up to cm scale.

scholarly journals Single-shot detection of 8 unique monochrome fringe patterns representing 4 distinct directions via multispectral fringe projection profilometry

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Parsa Omidi ◽  
Mohamadreza Najiminaini ◽  
Mamadou Diop ◽  
Jeffrey J. L. Carson
Keyword(s):  
Spatial Resolution ◽  
Fringe Pattern ◽  
Three Dimensional ◽  
Fringe Projection ◽  
Video Frame ◽  
Single Shot ◽  
Shot Detection ◽  
Fringe Patterns ◽  
Fringe Projection Profilometry ◽  
Multispectral Camera

AbstractSpatial resolution in three-dimensional fringe projection profilometry is determined in large part by the number and spacing of fringes projected onto an object. Due to the intensity-based nature of fringe projection profilometry, fringe patterns must be generated in succession, which is time-consuming. As a result, the surface features of highly dynamic objects are difficult to measure. Here, we introduce multispectral fringe projection profilometry, a novel method that utilizes multispectral illumination to project a multispectral fringe pattern onto an object combined with a multispectral camera to detect the deformation of the fringe patterns due to the object. The multispectral camera enables the detection of 8 unique monochrome fringe patterns representing 4 distinct directions in a single snapshot. Furthermore, for each direction, the camera detects two π-phase shifted fringe patterns. Each pair of fringe patterns can be differenced to generate a differential fringe pattern that corrects for illumination offsets and mitigates the effects of glare from highly reflective surfaces. The new multispectral method solves many practical problems related to conventional fringe projection profilometry and doubles the effective spatial resolution. The method is suitable for high-quality fast 3D profilometry at video frame rates.

scholarly journals High-resolution Three-dimensional Surface Imaging Microscope Based on Digital Fringe Projection Technique

2020 ◽  
Vol 20 (3) ◽  
pp. 139-144
Author(s):  
Cheng-Yang Liu ◽  
Tzu-Ping Yen ◽  
Chien-Wen Chen
Keyword(s):  
High Resolution ◽  
Imaging System ◽  
Three Dimensional ◽  
Fringe Projection ◽  
Surface Imaging ◽  
Projection Technique ◽  
Digital Fringe Projection ◽  
Absolute Phase ◽  
The Absolute ◽  
Fringe Patterns

AbstractThe three-dimensional (3-D) micro-scale surface imaging system based on the digital fringe projection technique for the assessments of microfiber and metric screw is presented in this paper. The proposed system comprises a digital light processing (DLP) projector, a set of optical lenses, a microscope, and a charge coupled device (CCD). The digital seven-step fringe patterns from the DLP projector pass through a set of optical lenses before being focused on the target surface. A set of optical lenses is designed for adjustment and size coupling of fringe patterns. A high-resolution CCD camera is employed to picture these distorted fringe patterns. The wrapped phase map is calculated by seven-step phase-shifting calculation from these distorted fringe patterns. The unwrapping calculation with quality guided path is introduced to compute the absolute phase values. The dimensional calibration methods are used to acquire the transformation between real 3-D shape and the absolute phase value. The capability of complex surface measurement for our system is demonstrated by using ISO standard screw M1.6. The experimental results for microfiber with 3 μm diameter indicate that the spatial and vertical resolutions can reach about 3 μm in our system. The proposed system provides a fast digital imaging system to examine the surface features with high-resolution for automatic optical inspection industry.

Algorithms for Generating Adaptive Projection Patterns for 3-D Shape Measurement

2007 ◽  
Author(s):  
Tao Peng ◽  
Satyandra K. Gupta
Keyword(s):  
Point Cloud ◽  
Measurement Accuracy ◽  
Point Clouds ◽  
Fringe Projection ◽  
Shape Measurement ◽  
Digital Fringe Projection ◽  
Physical Experiments ◽  
Dense Point ◽  
Improved Performance ◽  
Fringe Patterns

Point cloud acquisition using digital fringe projection (PCCDFP) is a non-contact technique for acquiring dense point clouds to represent the 3-D shapes of objects. Most existing PCCDFP systems use projection patterns consisting of straight fringes with fixed fringe pitches. In certain situations, such patterns do not give the best results. In our earlier work, we have shown that in some situations, patterns that use curved fringes with spatial pitch variation can significantly improve the process of constructing point clouds. This paper describes algorithms for automatically generating adaptive projection patterns that use curved fringes with spatial pitch variation to provide improved results for an object being measured. In addition, we also describe the supporting algorithms that are needed for utilizing adaptive projection patterns. Both simulation and physical experiments show that, adaptive patterns are able to achieve improved performance, in terms of measurement accuracy and coverage, than fixed-pitch straight fringe patterns.

Shape defect measurement by fringe projection profilometry and phase-shifting algorithms

2020 ◽  
Vol 59 (01) ◽  
pp. 1
Author(s):  
Sotero Ordoñes Nogales ◽  
Manuel Servin ◽  
Moises Padilla ◽  
Ivan Choque ◽  
Jorge L. Flores Nuñez ◽  
...  
Keyword(s):  
Phase Shifting ◽  
Fringe Projection ◽  
Fringe Projection Profilometry
Sign in / Sign up

Export Citation Format

Share Document