scholarly journals PENERAPAN VALUE ENGINEERING PADA PROYEK PEMBANGUNAN RSUD SANJIWANI GIANYAR DI MASA PANDEMI COVID-19

2021 ◽  
Vol 9 (1) ◽  
pp. 21
Author(s):  
Aditya Permana Putra ◽  
Anak Agung Gde Agung Yana ◽  
I Nyoman Yudha Astana
Keyword(s):  

Dalam pembangunan proyek konstruksi, biaya merupakan salah satu faktor penting yang menentukan keberlangsungan proyek. Pada studi kasus proyek pembangunan RSUD Sanjiwani Gianyar terdapat permasalahan bahwa terjadinya perubahan desain awal pada ruang isolasi terkait protokol COVID-19 yang menyebabkan kurangnya anggaran biaya rencana awal, sehingga perlu dilakukan penghematan biaya. Salah satu metode yang dapat digunakan untuk melakukan penghematan biaya yaitu metode Value Engineering (VE). VE adalah suatu metode pendekatan yang kreatif dan terencana dengan tujuan untuk mengefisienkan biaya-biaya yang tidak diperlukan. Tujuan dari penelitian ini adalah untuk menganalisis item-item pekerjaan yang berpotensi dihemat, menganalisis alternatif terbaik pengganti desain awal, dan menghitung besar penghematan biaya setelah dilakukan penerapan VE tersebut. Pada penelitian ini digunakan metode penelitian deskriptif kuantitatif. Analisis VE dilakukan dalam enam tahapan yaitu: tahap informasi, tahap analisis fungsi, tahap kreatif, tahap evaluasi, tahap pengembangan, dan tahap presentasi. Hasil analisis VE menunjukkan bahwa penghematan dapat dilakukan pada pekerjaan struktur beton dengan mengganti balok dan pelat konvensional menjadi balok precast dan pelat metal deck yang menghasilkan penghematan sebesar Rp1.046.477.531,18 atau 4,47%, pada pekerjaan penutup lantai digunakan alternatif lantai keramik sebagai pengganti lantai granite tile didapat penghematan sebesar Rp1.058.532.387,51 atau 34,64%, dan pada pekerjaan kusen, pintu, jendela digunakan alternatif daun pintu aluminium sebagai pengganti daun pintu plywood lapis HPL yang menghasilkan penghematan sebesar Rp117.598.489,53 atau 4,41%. Total penghematan biaya setelah dilakukan analisis VE adalah sebesar Rp2.043.035.163,40 atau 1,50% dari anggaran biaya awal.

PCI Journal ◽  
2006 ◽  
Vol 51 (4) ◽  
pp. 18-40 ◽  
Author(s):  
Pete Hamill ◽  
Camille H. Bechara ◽  
Mario Bertolini ◽  
Helmuth Wilden ◽  
Mark Biebighauser

2016 ◽  
Vol 12 (4) ◽  
Author(s):  
Ari Sandyavitri

This paper objectives are to; (i) identification of risky slopes (within 4 Provinces in Sumatra including Provinces of Riau, West Sumatra, Jambi and South Sumatra encompassing 840 kms of the “Jalan Lintas Sumatra” highway) based on Rockfall Hazard Rating Systems (RHRS) method; (ii) developing alternatives to stabilize slope hazards, and (iii) selecting appropriate slopes stabilization techniques based on both proactive approach and value engineering one. Based on the Rockfall Hazard Rating Systems (RHRS) method, it was identified 109 steep slopes prone to failure within this highway section. Approximately, 15 slopes were identified as potential high-risk slopes (RHRS scores were calculated >200 points). Based on the proactive approach, seven riskiest slopes ware identified. The preferred stabilization alternatives to remedy most of these slopes are suggested as follow; either (i) a combination of retaining wall and drainage, or (ii) gabion structure and drainage. However, different approaches may yield different results, there are at least 2 main consideration in prioritizing slope stabilization; (i) based on the riskiest slopes, and(ii) the least expensive stabilization alternatives.


2017 ◽  
Vol 7 (1) ◽  
pp. 43-52
Author(s):  
Mochamad Tamim Ma’ruf

One-solving methods and techniques necessary to avoid inefficiencies and not economic costs as well as reduce the cost of housing construction is the method of Value Engineering. Value engineering is a method and cost control techniques to analyze a function to its value at the lowest cost alternative (most economical) without reducing the quality desired.At the writing of this study used a comparison method by comparing the initial design to the design proposal of the author. In the housing projects Upgrading Tirto Penataran Asri type 70, the application of Value Engineering conducted on the job a couple walls and roofs pair by replacing some work items with a more economical alternative but does not change the original function and high aesthetic level and still qualify safe. For that performed the step of determining a work item, the alternative stage, the analysis stage, and the stage of recommendations to get a Value Engineering application and cost savings against the wall a couple of work items and partner roof.The proposed design as compared to the initial design. Work items discussed was the work of a couple wall having analyzed obtained savings of Rp. 2,747,643.56 and the work of the roof pair obtained savings of Rp. 2,363,446.80. Thus the total overall savings gained is Rp 5,111,090.36 or savings of 0048%.


2010 ◽  
Author(s):  
Jay Mandelbaum ◽  
Heather W. Williams ◽  
Anthony C. Hermes

Sign in / Sign up

Export Citation Format

Share Document