scholarly journals Vibratory Conveying by Rectilinear Vibration in an Oblique Direction

1974 ◽  
Vol 40 (479) ◽  
pp. 1099-1104
Author(s):  
Sakiichi OKABE ◽  
Yasuo YOKOYAMA ◽  
Yasuo JIMBO
Keyword(s):  

Being engaged in collecting materials for a work entitled “A Picture of Naval Architecture in the 18th and 19th Centuries,” the author was induced to visit this country, with a view to become acquainted with the various innovations and improvements lately introduced here in the art of ship-building; and, in the present communication, offers some remarks upon the plans proposed by Mr. Seppings, an account of which has formerly been before the Royal Society, and is printed in their Transactions for 1814. After giving an outline of the fundamental principles upon which Mr. Seppings’s improvements in naval architecture principally depend, and dwelling especially upon the diagonal pieces of timber which he employs to strengthen the usual rectangular frame-work, the author proceeds to state that similar contrivances were long ago suggested and even practised by the French ship-builders, in order to give strength to the general fabric of their vessels. Instead of making the ceiling parallel to the exterior planks, they arranged it in the oblique direction of the diagonals of the parallelograms formed by the timber and the ceiling, in the whole of that part of the ship’s sides between the orlop and limber-strake next the kelson. They then covered this ceiling with riders, as usual, and placed crosspieces between them in the direction of the second diameter of the parallelogram. This system, however, was abandoned in the French navy, on account of its expense, of its diminishing the capacity of the hold, and of the erroneous notion that the longitudinal length of the ship was diminished by the obliquity of the ceiling. In 1755, the Academy of Sciences rewarded M. Chauchot, a naval engineer, for the suggestion of employing oblique for transverse riders; and in 1772, M. Clairon des Lauriers employed diagonal strengtheners in the construction of the frigate l’Oiseau.


2016 ◽  
Vol 62 (No. 4) ◽  
pp. 198-204
Author(s):  
M. Brožek

The contribution contains results of bonded joints strength tests. The tests were carried out according to the modified standard ČSN EN 1465 (66 8510):2009. The spruce three-ply wood of 4 mm thickness was used for bonding according to ČSN EN 636 (49 2419):2013. The test samples of 100 × 25 mm size were cut out from a semi-product of 2,440 × 1,220 mm size in the direction of its longer side (angle 0°), in the oblique direction (angle 45°) and in the direction of its shorter side (crosswise – angle 90°). The bonding was carried out using eight different domestic as well as foreign adhesives according to the technology prescribed by the producer. All used adhesives were designated for wood bonding. At the bonding the consumption of the adhesive was determined. After curing, the bonded assemblies were loaded using a universal tensile-strength testing machine up to the rupture. The rupture force and the rupture type were registered. Finally, the technical-economical evaluation of the experiments was carried out. 


1859 ◽  
Vol 9 ◽  
pp. 194-196

In a former paper “ On the Phenomenon of Relief of the Image formed on the ground glass of the Camera Obscura,” which I com­municated to the Royal Society on the 8th of May 1856, after having investigated the cause of that extraordinary fact and tried to explain it, I found that the images produced separately by the various points of the whole aperture of an object-glass are visible only when the refracted rays are falling on the ground glass in a line nearly coinciding with the optic axes ; so that when both eyes are equally distant from the centre of the ground glass, each eye perceives only the image refracted in an oblique direction on that surface from the opposite side of the object-glass. Consequently each side of an object-glass, in proportion to its aperture, giving a different perspec­tive of a solid placed before it, the result is an illusion of relief as conspicuous as when looking naturally at the objects themselves. From the consideration of these singular facts, unnoticed before, I was led to think that it would be possible to construct a new Stereoscope, in which looking with both eyes at once on a ground glass at the point of coalescence of the two images of a stereoscopic slide, each refracted by a separate lens, we could see it on that surface in the same relief which is produced by the common stereoscope.


1829 ◽  
Vol 119 ◽  
pp. 241-254 ◽  

Some years ago my attention was drawn to those algebraic quantities, which are commonly called impossible roots or imaginary quantities: it appeared extraordinary, that mathematicians should be able by means of these quan­tities to pursue their investigations, both in pure and mixed mathematics, and to arrive at results which agree with the results obtained by other independent processes; and yet that the real nature of these quantities should be entirely unknown, and even their real existence denied. One thing was evident re­specting them; that they were quantities capable of undergoing algebraic operations analogous to the operations performed on what are called possible quantities, and of producing correct results: thus it was manifest, that the operations of algebra were more comprehensive than the definitions and funda­mental principles; that is, that they extended to a class of quantities, viz. those commonly called impossible roots, to which the definitions and funda­mental principles were inapplicable. It seemed probable, therefore, that there was a deficiency in the definitions and fundamental principles of algebra ; and that other definitions and fundamental principles might be discovered of a more comprehensive nature, which would extend to every class of quantities to which the operations of algebra were applicable; that is, both to possible and impossible quantities, as they are called. I was induced therefore to examine into the nature of algebraic operations, with a view, if possible, of arriving at these general definitions and fundamental principles: and I found, that, by considering algebra merely as applied to geometry, such principles and definitions might be obtained. The fundamental principles and definitions which I arrived at were these: that all straight lines drawn in a given plane from a given point, in any direction whatever, are capable of being algebra­ically represented, both in length and direction; that the addition of such lines (when estimated both in length and direction) must be performed in the same manner as composition of motion in dynamics; and that four such lines are proportionals, -both in length and direction, when they are proportionals in length, and the fourth is inclined to the third at the same angle that the second is to the first. From these principles I deduced, that, if a line drawn in any given direction be assumed as a positive quantity, and consequently its oppo­site, a negative quantity, a line drawn at right angles to the positive or nega­tive direction will be the square root of a negative quantity, and a line drawn in an oblique direction will be the sum of two quantities, the one either posi­tive or negative, and the other, the square root of a negative quantity.


2011 ◽  
Vol 250-253 ◽  
pp. 2744-2748
Author(s):  
Chun Yang Liu ◽  
Zhen Bao Li ◽  
Hua Ma ◽  
Jian Qiang Han ◽  
Shi Cai Chen

Experiments on reinforced concrete frame spatial joints are conducted under low level cyclic loadings.The seismic performance of the spatial joints is investigated,including failure mode,hysterisis curve, stiffness degradation,energy dissipation and displacement ductility.The experiment result shows that the column-hinge damage mechanism had happened and the bearing capactity ,energy dissipation character and displacement ductility had decreased under the oblique direction earthquake effect.The aseismic designing method should consider the oblique direction earthquake effect.


It has always appeared a paradox in mathematics, that by em­ploying what are called imaginary or impossible quantities, and sub­jecting them to the same algebraic operations as those which are performed on quantities that are real and possible, the results ob­tained should always prove perfectly correct. The author inferring from this fact, that the operations of algebra are of a more compre­hensive nature than its definitions and fundamental principles, was led to inquire what extension might be given to these definitions and principles, so as to render them strictly applicable to quantities of every description, whether real or imaginary. This deficiency, he conceives, may be supplied by having recourse to certain geometrical considerations. By taking into account the directions as well as the lengths of lines drawn in a given plane, from a given point, the ad­dition of such lines may admit of being performed in the same man­ner as the composition of motions in dynamics; and four such lines may be regarded as proportional, both in length and direction, when they are proportionals in length, and, when also the fourth is inclined to the third at the same angle that the second is to the first. From this principle he deduces, that if a line drawn in any given di­rection be assumed as a positive quantity, and consequently its op­posite a negative quantity, a line drawn at right angles to the posi­tive or negative direction will be represented by the square root of a negative quantity ; and a line drawn in an oblique direction will be represented by the sum of two quantities, the one either positive or negative, and the other the square root of a negative quantity. On this subject, the author published a treatise in April 1828; since which period several objections have been made to this hypothesis. The purpose of the present paper is to answer these objections. The first of these is, that impossible roots should be considered merely as the indications of some impossible condition, which the pro­position that has given rise to them involves; and that they have in fact no real or absolute existence. To this it is replied by the author, that although such a statement may be true in some cases, it is by no means necessarily so in all; and that these quantities re­semble in this respect fractional and negative roots, which, whenever they are excluded by the nature of the question, are indeed signs of impossibility, but yet in other cases are admitted to be real and significant quantities. We have therefore no stronger reasons, à priori , for denying the real existence of what are called impossible roots, because they are in some cases the signs of impossibility, than we should have for refusing that character to fractional or negative roots on similar grounds.


2018 ◽  
Vol 100 (6) ◽  
pp. 459-463
Author(s):  
D Yap ◽  
S Goddard ◽  
M Ng ◽  
A Al-Hussaini ◽  
D Owens

Introduction Several methods of securing a tracheostomy tube have been described in the literature including using ties or tapes around the neck and suturing the plastic flange to the neck in various ways. However, there are no wet lab-based studies to objectively determine the force required to displace the tracheostomy tube using different securing techniques. Ours is the first animal tissue simulation study published in the literature. Methods A simulated tracheostomy stoma was created on a sheep neck model. A tracheostomy tube was inserted into the stoma and secured using various methods. Tension tests were conducted to significantly displace the tube from the stoma. Each technique was repeated six times on different sheep necks. All results were analysed using SPSS®. Results Repeat measurements indicated that the largest displacement forces come from an oblique direction while the lowest force values were found at the lateral angle. Averages of displacement showed that medially placed sutures required the largest forces in comparison with other securing methods. Wilcoxon signed-rank testing indicated that medial and continuous suture security resists displacement at forces that otherwise displace flange and interrupted sutures. Conclusions This study has shown that any type of securing suture requires a greater displacement force than the strap of the tracheostomy tube holder alone. Medially placed sutures require a greater displacement force than those placed laterally. Displacement in the lateral direction requires the least force in comparison with movement at perpendicular or oblique angles.


2021 ◽  
Vol 12 ◽  
pp. 100180
Author(s):  
Fang Wang ◽  
Weiguo Li ◽  
Wendi Bao ◽  
Zhonglu Lv

Sign in / Sign up

Export Citation Format

Share Document