Analytical Thermal Boundary Condition for Quasi-Transient Simulation of Internal Flow Experiments

2021 ◽  
pp. 1-11
Author(s):  
Peter R. Forsyth ◽  
David Gillespie ◽  
Matthew McGilvray
Keyword(s):  
Boundary Condition ◽  
Internal Flow ◽  
Thermal Boundary Condition ◽  
Transient Simulation ◽  
Flow Experiments

scholarly journals Darcy-Brinkman free convection about a wedge and a cone subjected to a mixed thermal boundary condition

1992 ◽  
Vol 15 (4) ◽  
pp. 789-794 ◽  
Author(s):  
G. Ramanaiah ◽  
V. Kumaran
Keyword(s):  
Heat Transfer ◽  
Boundary Condition ◽  
Heat Flux ◽  
Porous Medium ◽  
Heat Transfer Coefficient ◽  
Free Convection ◽  
Transformation Group ◽  
Darcy Number ◽  
Thermal Boundary Condition ◽  
High Porosity

The Darcy-Brinkman free convection near a wedge and a cone in a porous medium with high porosity has been considered. The surfaces are subjected to a mixed thermal boundary condition characterized by a parameterm;m=0,1,∞correspond to the cases of prescribed temperature, prescribed heat flux and prescribed heat transfer coefficient respectively. It is shown that the solutions for differentmare dependent and a transformation group has been found, through which one can get solution for anymprovided solution for a particular value ofmis known. The effects of Darcy number on skin friction and rate of heat transfer are analyzed.

An Investigation of Local Heat Transfer during Grinding Process—Effects of Porosity of Grinding Wheel

1979 ◽  
Vol 101 (2) ◽  
pp. 97-103 ◽  
Author(s):  
Y. Saito ◽  
N. Nishiwaki ◽  
Y. Ito
Keyword(s):  
Heat Transfer ◽  
Boundary Condition ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Thermal Boundary Condition ◽  
Grinding Wheel ◽  
Grinding Process ◽  
Workpiece Surface

The thermal boundary condition around the workpiece surface is one of important factors to analyze the thermal deformation of a workpiece, which is in close relation to the machining, accuracy of grinding. The heat dissipation from the workpiece surface which is influenced by the flow pattern, may govern this thermal boundary condition. In consequence, it is necessary to clarify the convection heat transfer coefficient and the flow pattern of air and/or grinding fluid around surroundings of a rotating grinding wheel and of a workpiece. Here experiments were carried out in a surface grinding process to measure the flow velocity, wall pressure and local heat transfer by changing the porosity of the grinding wheel. The air blowing out from the grinding wheel which is effected by the porosity may be considered to have large influences on the local heat transfer coefficient, which is found to be neither symmetric nor uniform over the workpiece surface.

The Investigation of a Fluid-Solid Interaction Mathematical Model under Combined Convective Jeffrey Flow and Radiation Effect Embedded Newtonian Heating as the Thermal Boundary Condition over a Vertical Stretching Sheet

2020 ◽  
Vol 399 ◽  
pp. 65-75 ◽  
Author(s):  
Abdul Rahman Mohd Kasim ◽  
Nur Syamilah Arifin ◽  
Syazwani Mohd Zokri ◽  
Mohd Zuki Salleh
Keyword(s):  
Differential Equation ◽  
Boundary Condition ◽  
Stretching Sheet ◽  
Solid Phase ◽  
Particle Interaction ◽  
Thermal Boundary Condition ◽  
Dust Particles ◽  
Jeffrey Fluid ◽  
Physical Parameters ◽  
Newtonian Heating

The investigation on the interaction between solid and fluid under combined convective flow has been carried out mathematically. The Jeffrey fluid model is taken as the fluid phase and the model is being embedded with the dust particles (solid phase). This two-phase model is constructed by introducing the fluid-particles interaction forces in the momentum equations of the fluid and dust phases, respectively. The natural and forced convections together with the aligned magnetic field are considered on the fluid flow. Also, the Newtonian heating as thermal boundary condition is induced on the vertical stretching sheet. In order to reduce the complexity of the model, the governing equations are transformed from partial differential equation into ordinary differential equation via suitable similarity transformation. The solutions are obtained in terms of velocity and temperature profiles for the fluid and particles phases respectively whereby the Keller-box method is utilized to obtain the desired outcomes. The influences of several significant physical parameters are visualized graphically to clarify the flow and heat transfer characteristic for both phases. The investigation found that the fluid’s velocity is affected by the presence of the dust particles which led to decelerate the fluid transference. The present flow model is able to be compared with the single-phase fluid cases if the fluid-particle interaction parameter is ignored.

Sign in / Sign up

Export Citation Format

Share Document