The paper presents the results of laboratory measurement of temperature in the machining zone during the straight turning of a shaft made of the AMS 5643 steel. The machining trials were recorded using the FLIR 620 thermographic camera, and the ThermaCam Researcher software was used to archive and analyse the measurement results. The experimental test plan for varying machining parameters (vc, ap, f) was developed using the Taguchi method, and the ANOVA was used for statistical processing of results. The experiment involved nine trials with a coated insert and nine trials with an uncoated insert. The obtained results will be used to improve the cutting process simulation model.
Design and Experimental Test Plan for Hybrid Sulfur Single Cell Pressurized Electrolyzer