A Numerical Study of the Thrust Generation from a Honeybee Wing Model near the Water Surface

2021 ◽  
Author(s):  
Dominic D. Chandar ◽  
Niamh Carlin ◽  
Shashank K Karanth ◽  
Awie Viljoen ◽  
Wei Hua Ho
Keyword(s):  
Water Surface ◽  
Numerical Study ◽  
Wing Model ◽  
Thrust Generation

scholarly journals 3D Numerical Study of the Flow Properties in a Double-Spur Dikes Field during a Flood Process

Water ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1574 ◽  
Author(s):  
Xun Han ◽  
Pengzhi Lin
Keyword(s):  
Water Surface ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Field Measurements ◽  
Navier Stokes ◽  
Eddy Simulation ◽  
River Bed ◽  
Hydrodynamic Evolution ◽  
Spur Dikes ◽  
Potential Damage

A 3D numerical model is developed to study the flow characteristics of a double-spur dikes field on Yangtze River during a flood process, which was presented by the variation of the flow condition. The model is based on Navier–Stokes (NS) equations, the porous medium method (PMM) is employed to treat the solid structures including the river bed surface, the volume of fluid (VOF) method is applied to track the motion of the water surface during the flood process, and large eddy simulation (LES) is adopted to capture the turbulence transport and dissipation. Using this model, the target reach’s flow field before the construction of double-spur dikes is simulated first, while the numerical results are compared to the field measurements on flow velocity and water surface level, and fairly good agreements are shown. Then, the model is applied to reproduce the hydrodynamic evolution during a flood process after double-spur dikes’ constructions, while the detailed 3D flow fields are obtained under some certain states with different submergence rates of the spur dikes; finally, the potential damage positions around these spur dikes are analyzed accordingly.

A Conceptual Model of Flapping-Wing Mechanism Inspired from the Results of Numerical Study

2013 ◽  
Vol 397-400 ◽  
pp. 783-788
Author(s):  
Xing Wei Zhang ◽  
Chao Wang ◽  
Hang Liu
Keyword(s):  
Conceptual Model ◽  
Power Efficiency ◽  
Stokes Equations ◽  
Numerical Study ◽  
Flapping Wing ◽  
Numerical Results ◽  
Navier Stokes ◽  
Active Deformation ◽  
Navier Stokes Equations ◽  
Wing Model

This paper investigates the aerodynamic forces of several plunging wing models by means of computational fluid dynamics. A finite volume method was used to solve the two-dimensional unsteady incompressible Navier-Stokes equations. The forces and power efficiency have been calculated and compared between sets of different models. Current work found that the nonsymmetrical moving can enhance the lift and thrust forces. The numerical results also prove that the flexible wing model can be use to improve the efficiency and reduce the input. Additionally, a new conceptual model for flapping wing mechanism with active deformation and adaptive nonsymmetrical driving motion is proposed base on the numerical results.

Numerical Study of Winglet Cant Angle Effect on Wing Performance at Low Reynolds Number

2013 ◽  
Vol 393 ◽  
pp. 366-371
Author(s):  
C.F. Mat Taib ◽  
Abdul Aziz Jaafar ◽  
Salmiah Kasolang
Keyword(s):  
Reynolds Number ◽  
Numerical Analysis ◽  
Numerical Study ◽  
Low Reynolds Number ◽  
Lift Coefficient ◽  
Wing Model ◽  
Low Reynolds ◽  
Wing Performance ◽  
Drag Ratio ◽  
Lift To Drag Ratio

The study on the effect of winglet shape in wing design has been a focus of many researchers. Nevertheless, the effect of cant angle on the wing performances at low Reynolds number has not been fully explored. This paper describes the effect of a single semi-circular shaped winglet attached with a rectangular wing model to lower the drag without increasing the span of the wing. Aerodynamic characteristics for the rectangular wing (NACA 65-3-218) with and without semi-circular winglets have been studied using STAR CCM+ 4.0. This numerical analysis is based on Finite Volume Approach. Simulations were carried out on the rectangular wing model with and without winglet at aspect ratio of 2.73 and Reynolds number of 0.16 x 10 6 for various angles of attack. From the numerical analysis, wing performance characteristics in terms of lift coefficient CL, drag coefficient CD, and lift-to-drag ratio, CL/CD were obtained. It was found that the addition of a semi-circular winglet has resulted in a larger lift curve slope and higher Lift-to-Drag ratio in comparison with the case of a wing without winglet. Further investigation has revealed that a wing with semi-circular winglet with cant angle of 45 degree has produced the best Lift-to-Drag ratio, CL/CD.

Numerical Study on Thrust Generation Performance of Plunging Airfoils

2013 ◽  
Vol 312 ◽  
pp. 235-238
Author(s):  
Ji Gao ◽  
Rui Shan Yuan ◽  
Ming Hui Zhang ◽  
Yong Hui Xie
Keyword(s):  
Viscous Flow ◽  
Numerical Study ◽  
Angle Of Attack ◽  
Leading Edge ◽  
Thrust Coefficient ◽  
Propulsive Efficiency ◽  
Propulsion Performance ◽  
Incompressible Viscous Flow ◽  
Thrust Generation ◽  
The Difference

In this paper, the effects of angle of attack, camber and camber location on propulsion performance of flapping airfoils undergoing plunging motion were numerically studied at Re=20000 and h=0.175. The unsteady incompressible viscous flow around four different airfoil sections was simulated applying the dynamic mesh. The results show that the time averaged thrust coefficient CTmean and propulsive efficiency η of the symmetric airfoil decrease with the increasing angle of attack, and the variation of CTmean is more obvious than that of CPmean. Both CTmean and η for NACA airfoils studied in this paper decrease with the increasing camber and the difference between the propulsion performances of different airfoils is not obvious, and the thrust generation and power of various NACA airfoils gradually increase during the downstroke and decrease during the upstroke. Under the same conditions, the airfoil with a further distance between the maximum camber location and the chord of the leading edge leads to higher propulsive efficiency.

Numerical study of harbor oscillations induced by water surface disturbances within harbors of constant depth

2018 ◽  
Vol 68 (12) ◽  
pp. 1663-1681 ◽  
Author(s):  
Junliang Gao ◽  
Xiaojun Zhou ◽  
Li Zhou ◽  
Jun Zang ◽  
Qiang Chen ◽  
...  
Keyword(s):  
Water Surface ◽  
Numerical Study ◽  
Constant Depth ◽  
Harbor Oscillations ◽  
Surface Disturbances

Numerical Study on Boiling Mechanism and Rapid Phase Transfer Phenomenon of LNG Discharging on Water

2012 ◽  
Vol 516-517 ◽  
pp. 97-106 ◽  
Author(s):  
Bin Zhang ◽  
Wan Qing Wu ◽  
Jian Wei Zhang
Keyword(s):  
Mass Transfer ◽  
Transfer Rate ◽  
Water Surface ◽  
Phase Transfer ◽  
Numerical Study ◽  
Mass Transfer Rate ◽  
Initial Time ◽  
Rapid Phase ◽  
Boiling Mechanism ◽  
Superheat Limit

Abstract. Aiming at analyzing boiling mechanism and confirming rapid phase Abstract. Aiming at analyzing boiling mechanism and confirming rapid phase transfer (RPT) taking place conditions of LNG discharging on water. The models of pool spreading, heat and mass transfer rate and LNG’s property are coupled in this paper. The conditions of RPT has been confirmed, which included LNG directly contacting with water and the water temperature should higher than LNG’s superheat limit temperature, but the RPT would not take place if the LNG boils on ice. The model of LNG discharging on water has been established in this paper, which is used to simulate Boe and Burro-9 experiments. The results showed that the models can simulate evaporation and boiling rate well, and can be used in predicting the initial time of RPT happening when the discharging process is calm and the location of discharging is near the water surface.

Sign in / Sign up

Export Citation Format

Share Document