Effects of the Solar Radiation Torque on Sun-Synchronous Gravity Gradient Stabilized Spacecraft

2003 ◽  
Author(s):  
Giovanni B. Palmerini
1966 ◽  
Vol 88 (2) ◽  
pp. 444-450 ◽  
Author(s):  
R. J. McElvain ◽  
L. Schwartz

The considerations necessary for minimization of solar radiation pressure effects for gravity-gradient stabilized vehicles are presented here. Owing to the rather weak restoring forces available for gravity-gradient stabilized vehicles, solar pressure torques represent a prime source of attitude errors unless steps are taken to minimize their effects. The solar torque minimization procedure generally consists of four distinct steps for a given vehicle configuration: (a) Derivation of the solar torque expressions for the characteristic vehicle configuration, including such effects as diffuse reflection, multiple reflections, and so on; (b) identification of the relative contribution of the solar torques on the various surfaces, and facilitation of solar torque minimization by balancing torque contributions of similar time variation and opposite sign against one another; (c) minimization of the torque about the vehicle axis with the weakest restoring torque (usually the local vertical) via optimization of reflectance characteristics and other physical parameters (using a steepest descent or similar approach); and (d) determination of the vehicle attitude response for the nominal configuration and reflectances, suggesting any configurational changes which might reduce peak attitude errors if necessary. The minimization procedure is performed in this paper using the NASA / Hughes Applications Technology Satellite (ATS) as a prime example of a gravity-gradient-stabilized satellite in an environment where solar pressure is the predominant external disturbance. The application of the solar balancing techniques to the ATS configuration resulted in peak yaw torques of less than 1 dyne-cm for the synchronous altitude satellite, and corresponding peak attitude errors of less than 1 deg in all axes due to solar pressure torques. Although the torque minimization procedures presented here are applicable in the general sense, the application of the techniques to a specific configuration requires derivation of the solar torque expressions for that particular configuration; therefore, the torque minimization example for the NASA/Hughes ATS vehicle can serve as a guide for other configuration applications.


Space Weather ◽  
2006 ◽  
Vol 4 (6) ◽  
pp. n/a-n/a ◽  
Author(s):  
Tracy Staedter
Keyword(s):  

2003 ◽  
Vol 107 ◽  
pp. 743-747
Author(s):  
D. R.S. Lean ◽  
SD. Siciliano
Keyword(s):  

2019 ◽  
pp. 53-65
Author(s):  
Renata Domingos ◽  
Emeli Guarda ◽  
Elaise Gabriel ◽  
João Sanches

In the last decades, many studies have shown ample evidence that the existence of trees and vegetation around buildings can contribute to reduce the demand for energy by cooling and heating. The use of green areas in the urban environment as an effective strategy in reducing the cooling load of buildings has attracted much attention, though there is a lack of quantitative actions to apply the general idea to a specific building or location. Due to the large-scale construction of high buildings, large amounts of solar radiation are reflected and stored in the canyons of the streets. This causes higher air temperature and surface temperature in city areas compared to the rural environment and, consequently, deteriorates the urban heat island effect. The constant high temperatures lead to more air conditioning demand time, which results in a significant increase in building energy consumption. In general, the shade of the trees reduces the building energy demand for air conditioning, reducing solar radiation on the walls and roofs. The increase of urban green spaces has been extensively accepted as effective in mitigating the effects of heat island and reducing energy use in buildings. However, by influencing temperatures, especially extreme, it is likely that trees also affect human health, an important economic variable of interest. Since human behavior has a major influence on maintaining environmental quality, today's urban problems such as air and water pollution, floods, excessive noise, cause serious damage to the physical and mental health of the population. By minimizing these problems, vegetation (especially trees) is generally known to provide a range of ecosystem services such as rainwater reduction, air pollution mitigation, noise reduction, etc. This study focuses on the functions of temperature regulation, improvement of external thermal comfort and cooling energy reduction, so it aims to evaluate the influence of trees on the energy consumption of a house in the mid-western Brazil, located at latitude 15 ° S, in the center of South America. The methodology adopted was computer simulation, analyzing two scenarios that deal with issues such as the influence of vegetation and tree shade on the energy consumption of a building. In this way, the methodological procedures were divided into three stages: climatic contextualization of the study region; definition of a basic dwelling, of the thermophysical properties; computational simulation for quantification of energy consumption for the four facade orientations. The results show that the façades orientated to north, east and south, without the insertion of arboreal shading, obtained higher values of annual energy consumption. With the adoption of shading, the facades obtained a consumption reduction of around 7,4%. It is concluded that shading vegetation can bring significant climatic contribution to the interior of built environments and, consequently, reduction in energy consumption, promoting improvements in the thermal comfort conditions of users.


Sign in / Sign up

Export Citation Format

Share Document