scholarly journals BROADBAND AND HIGH EFFICIENCY SINGLE-LAYER REFLECTARRAY USING CIRCULAR RING ATTACHED TWO SETS OF PHASE-DELAY LINES

2018 ◽  
Vol 66 ◽  
pp. 193-202 ◽  
Author(s):  
Fei Xue ◽  
Hongjian Wang ◽  
Yinghui Wang ◽  
Longjun Zhang
2017 ◽  
Vol 26 (5) ◽  
pp. 057701 ◽  
Author(s):  
Hai-Sheng Hou ◽  
Guang-Ming Wang ◽  
Hai-Peng Li ◽  
Wen-Long Guo ◽  
Tang-jing Li ◽  
...  

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Feiying Sun ◽  
Changbin Nie ◽  
Xingzhan Wei ◽  
Hu Mao ◽  
Yupeng Zhang ◽  
...  

Abstract Two-dimensional (2D) materials with excellent optical properties and complementary metal-oxide-semiconductor (CMOS) compatibility have promising application prospects for developing highly efficient, small-scale all-optical modulators. However, due to the weak nonlinear light-material interaction, high power density and large contact area are usually required, resulting in low light modulation efficiency. In addition, the use of such large-band-gap materials limits the modulation wavelength. In this study, we propose an all-optical modulator integrated Si waveguide and single-layer MoS2 with a plasmonic nanoslit, wherein modulation and signal light beams are converted into plasmon through nanoslit confinement and together are strongly coupled to 2D MoS2. This enables MoS2 to absorb signal light with photon energies less than the bandgap, thereby achieving high-efficiency amplitude modulation at 1550 nm. As a result, the modulation efficiency of the device is up to 0.41 dB μm−1, and the effective size is only 9.7 µm. Compared with other 2D material-based all-optical modulators, this fabricated device exhibits excellent light modulation efficiency with a micron-level size, which is potential in small-scale optical modulators and chip-integration applications. Moreover, the MoS2-plasmonic nanoslit modulator also provides an opportunity for TMDs in the application of infrared optoelectronics.


2018 ◽  
Vol 27 (2) ◽  
pp. 440-447 ◽  
Author(s):  
T. Shabbir ◽  
R. Saleem ◽  
S. U. Rehman ◽  
M. F. Shafique

Materials ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2029
Author(s):  
Tianyu Zhang ◽  
Asu Li ◽  
Ren Sheng ◽  
Mingyang Sun ◽  
Ping Chen

High-efficiency single-layer organic light-emitting diodes (OLEDs) based on a simple structure doped with iridium(III) bis(4-phenylthieno[3,2-c]pyridinato-N,C2′) acetylacetonate (PO-01) as emission dyes are realized, achieving maximum current efficiency (CE) and power efficiency (PE) of 37.1 cd A−1 and 33.3 lm W−1 as well as low turn-on voltage of 3.31 V. Such superior performance is mainly attributed to the employment of a uniform co-host structure and assisted charge transport property of phosphors dyes, which were in favor of the balance of charge carrier injection and transport in the single emitting layer (EML). Moreover, systematic researches on the position of exciton recombination region and the dopant effect on charge carriers were subsequently performed to better understand the operational mechanism. It could be experimentally found that the orange emitting dopants promoted the acceleration of the charge carriers transport and raised the exciton recombination efficiency, eventually leading to an excellent performance of single-layer OLEDs.


Sign in / Sign up

Export Citation Format

Share Document