scholarly journals A Comparison of Separators vs. Membranes in Nonaqueous Redox Flow Battery Electrolytes Containing Small Molecule Active Materials

Author(s):  
Zhiming Liang ◽  
N. Harsha Attanayake ◽  
Katharine Greco ◽  
Bertrand Neyhouse ◽  
John L. Barton ◽  
...  

<p>The lack of suitable membranes for nonaqueous electrolytes limits cell capacity and cycle lifetime in organic redox flow cells. Using soluble, stable materials, we sought to compare the best performance that could be achieved with commercially available microporous separators and ion-selective membranes. We use organic species with proven stability to avoid deconvoluting capacity fade due to crossover and/or cell imbalance from materials degradation. We found a trade-off between lifetime and coulombic efficiency: non-selective separators achieve more stable performance but suffer from low coulombic efficiencies, while ion-selective membranes achieve high coulombic efficiencies but experience capacity loss over time. When electrolytes are pre-mixed prior to cycling, coulombic efficiency remains high, but capacity is lost due to cell imbalance, which can be recovered by electrolyte rebalancing. The results of this study highlight the potential for gains in nonaqueous cell performance that may be enabled by suitable membranes.</p>

2021 ◽  
Author(s):  
Zhiming Liang ◽  
N. Harsha Attanayake ◽  
Katharine Greco ◽  
Bertrand Neyhouse ◽  
John L. Barton ◽  
...  

<p>The lack of suitable membranes for nonaqueous electrolytes limits cell capacity and cycle lifetime in organic redox flow cells. Using soluble, stable materials, we sought to compare the best performance that could be achieved with commercially available microporous separators and ion-selective membranes. We use organic species with proven stability to avoid deconvoluting capacity fade due to crossover and/or cell imbalance from materials degradation. We found a trade-off between lifetime and coulombic efficiency: non-selective separators achieve more stable performance but suffer from low coulombic efficiencies, while ion-selective membranes achieve high coulombic efficiencies but experience capacity loss over time. When electrolytes are pre-mixed prior to cycling, coulombic efficiency remains high, but capacity is lost due to cell imbalance, which can be recovered by electrolyte rebalancing. The results of this study highlight the potential for gains in nonaqueous cell performance that may be enabled by suitable membranes.</p>


Batteries ◽  
2018 ◽  
Vol 4 (4) ◽  
pp. 48 ◽  
Author(s):  
Arjun Bhattarai ◽  
Purna Ghimire ◽  
Adam Whitehead ◽  
Rüdiger Schweiss ◽  
Günther Scherer ◽  
...  

The vanadium redox flow battery (VRFB) is one of the most mature and commercially available electrochemical technologies for large-scale energy storage applications. The VRFB has unique advantages, such as separation of power and energy capacity, long lifetime (>20 years), stable performance under deep discharge cycling, few safety issues and easy recyclability. Despite these benefits, practical VRFB operation suffers from electrolyte imbalance, which is primarily due to the transfer of water and vanadium ions through the ion-exchange membranes. This can cause a cumulative capacity loss if the electrolytes are not rebalanced. In commercial systems, periodic complete or partial remixing of electrolyte is performed using a by-pass line. However, frequent mixing impacts the usable energy and requires extra hardware. To address this problem, research has focused on developing new membranes with higher selectivity and minimal crossover. In contrast, this study presents two alternative concepts to minimize capacity fade that would be of great practical benefit and are easy to implement: (1) introducing a hydraulic shunt between the electrolyte tanks and (2) having stacks containing both anion and cation exchange membranes. It will be shown that the hydraulic shunt is effective in passively resolving the continuous capacity loss without detrimentally influencing the energy efficiency. Similarly, the combination of anion and cation exchange membranes reduced the net electrolyte flux, reducing capacity loss. Both approaches work efficiently and passively to reduce capacity fade during operation of a flow battery system.


2020 ◽  
Vol 49 (45) ◽  
pp. 16047-16053
Author(s):  
Brian H. Robb ◽  
Scott E. Waters ◽  
Michael P. Marshak

Here, we outline some basic pitfalls in the electrochemical investigation of aqueous metal complexes, advocate for the use of bulk electrolysis in redox flow cells for electrolyte analysis, and demonstrate methods of operation and performance of a lab scale redox flow battery.


2006 ◽  
Vol 160 (1) ◽  
pp. 716-732 ◽  
Author(s):  
C. Ponce de León ◽  
A. Frías-Ferrer ◽  
J. González-García ◽  
D.A. Szánto ◽  
F.C. Walsh

2018 ◽  
Vol 31 (2) ◽  
pp. 148-153 ◽  
Author(s):  
Jili Xie ◽  
Guanlin Li ◽  
Wang Tan

The double-layer membrane consisting of sulfonated poly(ether sulfone) (SPES) sub-layer and polyvinyl alcohol (PVA) sub-layer (denoted as SPES/PVA membrane) was prepared and employed as the separator for vanadium redox flow battery (VRB) system to evaluate the vanadium ions permeability and cell performance. The SPES/PVA membrane is a double-layer structure and exhibits dramatically lower vanadium ions permeability and better cell performance compared to the pristine SPES membrane, PVA membrane, and Nafion117 membrane. The vanadium ion permeability of SPES/PVA membrane is one order of magnitude lower than that of Nafion117 membrane. In further work, the single cell with SPES/PVA membrane showed significantly lower capacity loss, higher coulombic efficiency (>92.5%), and higher energy efficiency (>83.9%) than Nafion117 membrane. In the self-discharge test, SPES/PVA membrane showed 1.8 times longer duration in the open circuit decay than Nafion117 membrane. With all the good properties and low cost, this new kind of double-layer membrane is suggested to have excellent commercial prospects as an ion exchange membrane for VRB systems.


Batteries ◽  
2019 ◽  
Vol 5 (3) ◽  
pp. 57 ◽  
Author(s):  
Seyed Madani ◽  
Erik Schaltz ◽  
Søren Knudsen Kær

The determination of coulombic efficiency of the lithium-ion batteries can contribute to comprehend better their degradation behavior. In this research, the coulombic efficiency and capacity loss of three lithium-ion batteries at different current rates (C) were investigated. Two new battery cells were discharged and charged at 0.4 C and 0.8 C for twenty times to monitor the variations in the aging and coulombic efficiency of the battery cell. In addition, prior cycling was applied to the third battery cell which consist of charging and discharging with 0.2 C, 0.4 C, 0.6 C, and 0.8 C current rates and each of them twenty times. The coulombic efficiency of the new battery cells was compared with the cycled one. The experiments demonstrated that approximately all the charge that was stored in the battery cell was extracted out of the battery cell, even at the bigger charging and discharging currents. The average capacity loss rates for discharge and charge during 0.8 C were approximately 0.44% and 0.45% per cycle, correspondingly.


2020 ◽  
Vol 8 (31) ◽  
pp. 15715-15724 ◽  
Author(s):  
Jingchao Chai ◽  
Amir Lashgari ◽  
Xiao Wang ◽  
Caroline K. Williams ◽  
Jianbing “Jimmy” Jiang

A non-aqueous redox flow battery based on all-PEGylated, metal-free compounds is presented. The PEGylation enhances the stability of the redox-active materials, alleviating crossover by increasing the anolyte and catholyte species’ molecular sizes.


Sign in / Sign up

Export Citation Format

Share Document