scholarly journals Rational Engineering of Hydratase from Lactobacillus Acidophilus Reveals Critical Residues Directing Substrate Specificity and Regioselectivity

2019 ◽  
Author(s):  
Bekir Engin Eser ◽  
Michal Poborsky ◽  
Rongrong Dai ◽  
Shigenobu Kishino ◽  
Anita Ljubic ◽  
...  
Keyword(s):  
Fatty Acids ◽  
Substrate Specificity ◽  
Lactobacillus Acidophilus ◽  
Catalytic Efficiency ◽  
Fold Increase ◽  
Wild Type ◽  
Active Site Residues ◽  
Diverse Range ◽  
Preparative Scale ◽  
Conversion Rates

<div>Enzymatic conversion of abundant fatty acids (FAs) through fatty acid hydratases (FAHs) presents an environment-friendly and efficient route for production of high-value hydroxy fatty acids (HFAs). However, a limited diversity was achieved among HFAs to date with respect to chain length and hydroxy group position, due to high substrate- and regio-selectivity of hydratases. In this study, we compared two highly similar FAHs from Lactobacillus acidophilus: FA-HY2 has narrow substrate scope and strict regioselectivity, whereas FA-HY1 utilize longer chain substrates and hydrate various double bond positions. We reveal three active-site residues that play remarkable role in directing substrate specificity and regioselectivity of hydration. When these residues on FA-HY2 are mutated to the corresponding residues in FA-HY1, we observe a significant expansion of substrate scope and distinct shift and enhancement in hydration of double bonds towards -end of FAs. A three-residue mutant of FA-HY2 (TM-FA-HY2; T391S/H393S/I378P) displayed an impressive reversal of regioselectivity towards linoleic acid, shifting ratio of the HFA product regioisomers (10-OH:13-OH) from 99:1 to 12:88. Although kcat values are still low in comparison to wild-type FA-HY1, TM-FA-HY2 exhibited about 60-fold increase in catalytic efficiency (kcat/Km) compared to wild-type FA-HY2. Important changes in regioselectivity were also observed with mutant enzymes for arachidonic acid and C18 PUFAs. In addition, TM-FA-HY2 variant exhibited high conversion rates for cis-5, cis-8, cis-11, cis-14, cis-17-eicosapentaenoic acid (EPA) and cis-8, cis-11, cis-14-eicosatrienoic acid (ETA) at preparative scale and enabled isolation of 12-hydroxy products with moderate yields. Furthermore, we demonstrated the potential of microalgae as a source of diverse FAs for HFA production. Our study paves the way for tailor-made FAH design and for efficient conversion of FA sources into diverse range of HFAs with high potential for various applications from polymer industry to medical field.</div><div><br></div>

scholarly journals Rational Engineering of Hydratase from Lactobacillus Acidophilus Reveals Critical Residues Directing Substrate Specificity and Regioselectivity

2019 ◽  
Author(s):  
Bekir Engin Eser ◽  
Michal Poborsky ◽  
Rongrong Dai ◽  
Shigenobu Kishino ◽  
Anita Ljubic ◽  
...  
Keyword(s):  
Fatty Acids ◽  
Substrate Specificity ◽  
Lactobacillus Acidophilus ◽  
Catalytic Efficiency ◽  
Fold Increase ◽  
Wild Type ◽  
Active Site Residues ◽  
Diverse Range ◽  
Preparative Scale ◽  
Conversion Rates

<div>Enzymatic conversion of abundant fatty acids (FAs) through fatty acid hydratases (FAHs) presents an environment-friendly and efficient route for production of high-value hydroxy fatty acids (HFAs). However, a limited diversity was achieved among HFAs to date with respect to chain length and hydroxy group position, due to high substrate- and regio-selectivity of hydratases. In this study, we compared two highly similar FAHs from <i>Lactobacillus acidophilus</i>: FA-HY2 has narrow substrate scope and strict regioselectivity, whereas FA-HY1 utilize longer chain substrates and hydrate various double bond positions. We reveal three active-site residues that play remarkable role in directing substrate specificity and regioselectivity of hydration. When these residues on FA-HY2 are mutated to the corresponding residues in FA-HY1, we observe a significant expansion of substrate scope and distinct shift and enhancement in hydration of double bonds towards omega-end of FAs. A three-residue mutant of FA-HY2 (TM-FA-HY2; T391S/H393S/I378P) displayed an impressive reversal of regioselectivity towards linoleic acid, shifting ratio of the HFA product regioisomers (10-OH:13-OH) from 99:1 to 12:88. Although kcat values are still low in comparison to wild-type FA-HY1, TM-FA-HY2 exhibited about 60-fold increase in catalytic efficiency (<i>k</i><sub>cat</sub>/<i>K</i><sub>m</sub>) compared to wild-type FA-HY2. Important changes in regioselectivity were also observed with mutant enzymes for arachidonic acid and C18 PUFAs. In addition, TM-FA-HY2 variant exhibited high conversion rates for <i>cis</i>-5, <i>cis</i>-8, <i>cis</i>-11,<i> cis</i>-14, <i>cis</i>-17-eicosapentaenoic acid (EPA) and <i>cis</i>-8, <i>cis</i>-11, <i>cis</i>-14-eicosatrienoic acid (ETA) at preparative scale and enabled isolation of 12-hydroxy products with moderate yields. Furthermore, we demonstrated the potential of microalgae as a source of diverse FAs for HFA production. Our study paves the way for tailor-made FAH design and for efficient conversion of FA sources into diverse range of HFAs with high potential for various applications from polymer industry to medical field.</div><div><br></div>

scholarly journals Rational Engineering of Hydratase from Lactobacillus Acidophilus Reveals Critical Residues Directing Substrate Specificity and Regioselectivity

2019 ◽  
Author(s):  
Bekir Engin Eser ◽  
Michal Poborsky ◽  
Rongrong Dai ◽  
Shigenobu Kishino ◽  
Anita Ljubic ◽  
...  
Keyword(s):  
Fatty Acids ◽  
Substrate Specificity ◽  
Lactobacillus Acidophilus ◽  
Catalytic Efficiency ◽  
Fold Increase ◽  
Wild Type ◽  
Active Site Residues ◽  
Diverse Range ◽  
Preparative Scale ◽  
Conversion Rates

<div>Enzymatic conversion of abundant fatty acids (FAs) through fatty acid hydratases (FAHs) presents an environment-friendly and efficient route for production of high-value hydroxy fatty acids (HFAs). However, a limited diversity was achieved among HFAs to date with respect to chain length and hydroxy group position, due to high substrate- and regio-selectivity of hydratases. In this study, we compared two highly similar FAHs from <i>Lactobacillus acidophilus</i>: FA-HY2 has narrow substrate scope and strict regioselectivity, whereas FA-HY1 utilize longer chain substrates and hydrate various double bond positions. We reveal three active-site residues that play remarkable role in directing substrate specificity and regioselectivity of hydration. When these residues on FA-HY2 are mutated to the corresponding residues in FA-HY1, we observe a significant expansion of substrate scope and distinct shift and enhancement in hydration of double bonds towards omega-end of FAs. A three-residue mutant of FA-HY2 (TM-FA-HY2; T391S/H393S/I378P) displayed an impressive reversal of regioselectivity towards linoleic acid, shifting ratio of the HFA product regioisomers (10-OH:13-OH) from 99:1 to 12:88. Although kcat values are still low in comparison to wild-type FA-HY1, TM-FA-HY2 exhibited about 60-fold increase in catalytic efficiency (<i>k</i><sub>cat</sub>/<i>K</i><sub>m</sub>) compared to wild-type FA-HY2. Important changes in regioselectivity were also observed with mutant enzymes for arachidonic acid and C18 PUFAs. In addition, TM-FA-HY2 variant exhibited high conversion rates for <i>cis</i>-5, <i>cis</i>-8, <i>cis</i>-11,<i> cis</i>-14, <i>cis</i>-17-eicosapentaenoic acid (EPA) and <i>cis</i>-8, <i>cis</i>-11, <i>cis</i>-14-eicosatrienoic acid (ETA) at preparative scale and enabled isolation of 12-hydroxy products with moderate yields. Furthermore, we demonstrated the potential of microalgae as a source of diverse FAs for HFA production. Our study paves the way for tailor-made FAH design and for efficient conversion of FA sources into diverse range of HFAs with high potential for various applications from polymer industry to medical field.</div><div><br></div>

scholarly journals DNA polymerase β: analysis of the contributions of tyrosine-271 and asparagine-279 to substrate specificity and fidelity of DNA replication by pre-steady-state kinetics

1997 ◽  
Vol 323 (1) ◽  
pp. 103-111 ◽  
Author(s):  
Vadim S. KRAYNOV ◽  
Brian G. WERNEBURG ◽  
Xuejun ZHONG ◽  
Hui LEE ◽  
Jinwoo AHN ◽  
...  
Keyword(s):  
Steady State ◽  
Substrate Specificity ◽  
Dna Polymerase ◽  
Excision Repair ◽  
Catalytic Efficiency ◽  
Main Function ◽  
Wild Type ◽  
Active Site Residues ◽  
Dna Polymerase Β ◽  
Steady State Kinetics

DNA polymerase β (pol β) from rat brain, overexpressed in Escherichia coli, was used as a model to study the factors responsible for substrate specificity [kpol, Kd(app) and kpol/Kd (app)] and fidelity during DNA synthesis. The roles of two active-site residues, Asn-279 and Tyr-271, were examined by construction of N279A, N279Q, Y271A, Y271F and Y271S mutants followed by structural analyses by NMR and CD and functional analyses by pre-steady-state kinetics. The results are summarized as follows. (i) None of the two-dimensional NMR spectra of the mutants was significantly perturbed relative to that for wild-type pol β, suggesting that Tyr-271 and Asn-279 are not important for the global structure of the protein. (ii) CD analyses of guanidinium hydrochloride-induced denaturation showed that all mutants behaved similarly to the wild type in the free energy of denaturation, suggesting that Tyr-271 and Asn-279 are not critical for the conformational stability of pol β. (iii) The Kd(app) for the correct dNTP was lower than that for the incorrect dNTP by a factor of 10-30 in the case of wild-type pol β. Upon mutation to give N279A and N279Q, the Kd(app) for the correct dNTP increased by a factor of 15-25. As a consequence, the Kd(app) values for the correct and incorrect nucleotides were similar for N279A and N279Q, suggesting that the main function of the side chain of Asn-279 is in discrimination between the binding of correct and incorrect dNTPs. (iv) In the case of the Y271A mutant, the fidelity and the catalytic efficiency kpol/Kd(app) were little perturbed relative to the wild type. However, both the kpol and Kd(app) values for dNTP were 4-8 times lower in the case of the Y271A mutant than the corresponding values for wild-type pol β. Since the chemical step may not be rate-limiting for wild-type pol β, the effect on kpol could be quite significant if it is caused by a perturbation in the chemical step. (v) Pol β displayed the greatest specificity towards the G:C base pair, which is incorporated during base excision repair of G:U and G:T mispairs. This specificity was slightly enhanced for the Y271F mutant.

scholarly journals Strategic manipulation of the substrate specificity of Saccharomyces cerevisiae flavocytochrome b2

1994 ◽  
Vol 301 (3) ◽  
pp. 829-834 ◽  
Author(s):  
S Daff ◽  
F D Manson ◽  
G A Reid ◽  
S K Chapman
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Substrate Specificity ◽  
Catalytic Efficiency ◽  
Hydroxy Acids ◽  
Wild Type ◽  
Active Site Residues ◽  
Sequence Comparisons ◽  
Flavocytochrome B2 ◽  
Strategic Manipulation ◽  
Primary Substrate

Flavocytochrome b2 from Saccharomyces cerevisiae acts physiologically as an L-lactate dehydrogenase. Although L-lactate is its primary substrate, the enzyme is also able to utilize a variety of other (S)-2-hydroxy acids. Structural studies and sequence comparisons with several related flavoenzymes have identified the key active-site residues required for catalysis. However, the residues Ala-198 and Leu-230, found in the X-ray-crystal structure to be in contact with the substrate methyl group, are not well conserved. We propose that the interaction between these residues and a prospective substrate molecule has a significant effect on the substrate specificity of the enzyme. In an attempt to modify the specificity in favour of larger substrates, three mutant enzymes have been produced: A198G, L230A and the double mutant A198G/L230A. As a means of quantifying the overall kinetic effect of a mutation, substrate-specificity profiles were produced from steady-state experiments with (S)-2-hydroxy acids of increasing chain length, through which the catalytic efficiency of each mutant enzyme with each substrate could be compared with the corresponding wild-type efficiency. The Ala-198-->Gly mutation had little influence on substrate specificity and caused a general decrease in enzyme efficiency. However, the Leu-230-->Ala mutation caused the selectivity for 2-hydroxyoctanoate over lactate to increase by a factor of 80.

scholarly journals A structural and kinetic survey of GH5_4 endoglucanases reveals determinants of broad substrate specificity and opportunities for biomass hydrolysis

2020 ◽  
Vol 295 (51) ◽  
pp. 17752-17769
Author(s):  
Evan M. Glasgow ◽  
Elias I. Kemna ◽  
Craig A. Bingman ◽  
Nicole Ing ◽  
Kai Deng ◽  
...  
Keyword(s):  
Substrate Specificity ◽  
Protein Design ◽  
Plant Biomass ◽  
Catalytic Efficiency ◽  
Structural Features ◽  
Glycoside Hydrolases ◽  
Design Strategies ◽  
Biomass Hydrolysis ◽  
Diverse Range ◽  
Broad Specificity

Broad-specificity glycoside hydrolases (GHs) contribute to plant biomass hydrolysis by degrading a diverse range of polysaccharides, making them useful catalysts for renewable energy and biocommodity production. Discovery of new GHs with improved kinetic parameters or more tolerant substrate-binding sites could increase the efficiency of renewable bioenergy production even further. GH5 has over 50 subfamilies exhibiting selectivities for reaction with β-(1,4)–linked oligo- and polysaccharides. Among these, subfamily 4 (GH5_4) contains numerous broad-selectivity endoglucanases that hydrolyze cellulose, xyloglucan, and mixed-linkage glucans. We previously surveyed the whole subfamily and found over 100 new broad-specificity endoglucanases, although the structural origins of broad specificity remained unclear. A mechanistic understanding of GH5_4 substrate specificity would help inform the best protein design strategies and the most appropriate industrial application of broad-specificity endoglucanases. Here we report structures of 10 new GH5_4 enzymes from cellulolytic microbes and characterize their substrate selectivity using normalized reducing sugar assays and MS. We found that GH5_4 enzymes have the highest catalytic efficiency for hydrolysis of xyloglucan, glucomannan, and soluble β-glucans, with opportunistic secondary reactions on cellulose, mannan, and xylan. The positions of key aromatic residues determine the overall reaction rate and breadth of substrate tolerance, and they contribute to differences in oligosaccharide cleavage patterns. Our new composite model identifies several critical structural features that confer broad specificity and may be readily engineered into existing industrial enzymes. We demonstrate that GH5_4 endoglucanases can have broad specificity without sacrificing high activity, making them a valuable addition to the biomass deconstruction toolset.

scholarly journals Mutation of Glutamic Acid 103 of Toluene o-Xylene Monooxygenase as a Means To Control the Catabolic Efficiency of a Recombinant Upper Pathway for Degradation of Methylated Aromatic Compounds

2005 ◽  
Vol 71 (8) ◽  
pp. 4744-4750 ◽  
Author(s):  
Valeria Cafaro ◽  
Eugenio Notomista ◽  
Paola Capasso ◽  
Alberto Di Donato
Keyword(s):  
Metabolic Engineering ◽  
Substrate Specificity ◽  
Glutamic Acid ◽  
Aromatic Hydrocarbons ◽  
Metabolic Pathway ◽  
Aromatic Compounds ◽  
Catalytic Efficiency ◽  
Pseudomonas Stutzeri ◽  
Wild Type ◽  
Exclusive Production

ABSTRACT Toluene o-xylene monooxygenase (ToMO) and phenol hydroxylase (PH) of Pseudomonas stutzeri OX1 act sequentially in a recombinant upper pathway for the degradation of aromatic hydrocarbons. The catalytic efficiency and regioselectivity of these enzymes optimize the degradation of growth substrates like toluene and o-xylene. For example, the sequential monooxygenation of o-xylene by ToMO and PH leads to almost exclusive production of 3,4-dimethylcatechol (3,4-DMC), the only isomer that can be further metabolized by the P. stutzeri meta pathway. We investigated the possibility of producing ToMO mutants with modified regioselectivity compared with the regioselectivity of the wild-type protein in order to alter the ability of the recombinant upper pathway to produce methylcatechol isomers from toluene and to produce 3,4-DMC from o-xylene. The combination of mutant (E103G)-ToMO and PH increased the production of 4-methylcatechol from toluene and increased the formation of 3,4-DMC from o-xylene. These data strongly support the idea that the products and efficiency of the metabolic pathway can be controlled not only through mutations that increase the catalytic efficiency of the enzymes involved but also through tuning the substrate specificity and regioselectivity of the enzymes. These findings are crucial for the development of future metabolic engineering strategies.

scholarly journals Improving the Stability and Activity of Arginine Decarboxylase at Alkaline pH for the Production of Agmatine

2021 ◽  
Vol 1 ◽  
Author(s):  
Eun Young Hong ◽  
Sun-Gu Lee ◽  
Hyungdon Yun ◽  
Byung-Gee Kim
Keyword(s):  
Disulfide Bond ◽  
Specific Activity ◽  
Catalytic Efficiency ◽  
Arginine Decarboxylase ◽  
Saturation Mutagenesis ◽  
Alkaline Ph ◽  
Wild Type ◽  
Active Site Residues ◽  
Cellular Mechanisms

Agmatine, involved in various modulatory actions in cellular mechanisms, is produced from arginine (Arg) by decarboxylation reaction using arginine decarboxylase (ADC, EC 4.1.1.19). The major obstacle of using wild-type Escherichia coli ADC (ADCes) in agmatine production is its sharp activity loss and instability at alkaline pH. Here, to overcome this problem, a new disulfide bond was rationally introduced in the decameric interface region of the enzyme. Among the mutants generated, W16C/D43C increased both thermostability and activity. The half-life (T1/2) of W16C/D43C at pH 8.0 and 60°C was 560 min, which was 280-fold longer than that of the wild-type, and the specific activity at pH 8.0 also increased 2.1-fold. Site-saturation mutagenesis was subsequently performed at the active site residues of ADCes using the disulfide-bond mutant (W16C/D43C) as a template. The best variant W16C/D43C/I258A displayed a 4.4-fold increase in the catalytic efficiency when compared with the wild-type. The final mutant (W16C/D43C/I258A) was successfully applied to in vitro synthesis of agmatine with an improved yield and productivity (&gt;89.0% yield based on 100 mM of Arg within 5  h).

scholarly journals Characterization of a Mannose-6-Phosphate Isomerase fromThermus thermophilusand Increased l-Ribose Production by Its R142N Mutant

2010 ◽  
Vol 77 (3) ◽  
pp. 762-767 ◽  
Author(s):  
Soo-Jin Yeom ◽  
Eun-Sun Seo ◽  
Bi-Na Kim ◽  
Yeong-Su Kim ◽  
Deok-Kun Oh
Keyword(s):  
Specific Activity ◽  
Thermus Thermophilus ◽  
Catalytic Efficiency ◽  
Maximal Activity ◽  
Wild Type ◽  
Active Site Residues ◽  
Geobacillus Thermodenitrificans ◽  
Wild Type Enzyme ◽  
Mannose 6 Phosphate

ABSTRACTAn uncharacterized gene fromThermus thermophilus, thought to encode a mannose-6-phosphate isomerase, was cloned and expressed inEscherichia coli. The maximal activity of the recombinant enzyme forl-ribulose isomerization was observed at pH 7.0 and 75°C in the presence of 0.5 mM Cu2+. Among all of the pentoses and hexoses evaluated, the enzyme exhibited the highest activity for the conversion ofl-ribulose tol-ribose, a potential starting material for manyl-nucleoside-based pharmaceutical compounds. The active-site residues, predicted according to a homology-based model, were separately replaced with Ala. The residue at position 142 was correlated with an increase inl-ribulose isomerization activity. The R142N mutant showed the highest activity among mutants modified with Ala, Glu, Tyr, Lys, Asn, or Gln. The specific activity and catalytic efficiency (kcat/Km) forl-ribulose using the R142N mutant were 1.4- and 1.6-fold higher than those of the wild-type enzyme, respectively. Thekcat/Kmof the R142N mutant was 3.8-fold higher than that ofGeobacillus thermodenitrificansmannose-6-phosphate isomerase, which exhibited the highest activity to date for the previously reportedkcat/Km. The R142N mutant enzyme produced 213 g/literl-ribose from 300 g/literl-ribulose for 2 h, with a volumetric productivity of 107 g liter−1h−1, which was 1.5-fold higher than that of the wild-type enzyme.

scholarly journals Probing the Substrate Specificity of Aminopyrrolnitrin Oxygenase (PrnD) by Mutational Analysis

2006 ◽  
Vol 188 (17) ◽  
pp. 6179-6183 ◽  
Author(s):  
Jung-Kul Lee ◽  
Ee-Lui Ang ◽  
Huimin Zhao
Keyword(s):  
Substrate Specificity ◽  
Mutational Analysis ◽  
Catalytic Efficiency ◽  
Site Directed Mutagenesis ◽  
Saturation Mutagenesis ◽  
Directed Mutagenesis ◽  
Wild Type ◽  
Wild Type Enzyme ◽  
Enzyme Substrate ◽  
Molecular Determinants

ABSTRACT Molecular modeling and mutational analysis (site-directed mutagenesis and saturation mutagenesis) were used to probe the molecular determinants of the substrate specificity of aminopyrrolnitrin oxygenase (PrnD) from Pseudomonas fluorescens Pf-5. There are 17 putative substrate-contacting residues, and mutations at two of the positions, positions 312 and 277, could modulate the enzyme substrate specificity separately or in combination. Interestingly, several of the mutants obtained exhibited higher catalytic efficiency (approximately two- to sevenfold higher) with the physiological substrate aminopyrrolnitrin than the wild-type enzyme exhibited.

scholarly journals Elimination of a Free Cysteine by Creation of a Disulfide Bond Increases the Activity and Stability of Candida boidinii Formate Dehydrogenase

2016 ◽  
Vol 83 (2) ◽  
Author(s):  
Junxian Zheng ◽  
Taowei Yang ◽  
Junping Zhou ◽  
Meijuan Xu ◽  
Xian Zhang ◽  
...  
Keyword(s):  
Disulfide Bonds ◽  
Catalytic Efficiency ◽  
Fold Increase ◽  
Enzyme Inactivation ◽  
Cysteine Residues ◽  
Candida Boidinii ◽  
Wild Type ◽  
Nadh Regeneration ◽  
Content Type ◽  
The Cost

ABSTRACT NAD+-dependent formate dehydrogenase (FDH; EC 1.2.1.2) is an industrial enzyme widely used for NADH regeneration. However, enzyme inactivation caused by the oxidation of cysteine residues is a flaw of native FDH. In this study, we relieved the oxidation of the free cysteine of FDH from Candida boidinii (CboFDH) through the construction of disulfide bonds between A10 and C23 as well as I239 and C262. Variants A10C, I239C, and A10C/I239C were obtained by the site-directed mutagenesis and their properties were studied. Results showed that there were no significant changes in the optimum temperature and pH between variants and wild-type CboFDH. However, the stabilities of all variant enzymes were improved. Specifically, the CboFDH variant A10C (A10C fdh ) showed a significant increase in copper ion resistance and acid resistance, a 6.7-fold increase in half-life at 60°C, and a 1.4-fold increase in catalytic efficiency compared with the wild type. Asymmetric synthesis of l-tert-leucine indicated that the process time was reduced by 40% with variant A10C fdh , which benefited from the increase in catalytic efficiency. Circular dichroism analysis and molecular dynamics simulation indicated that variants that contained disulfide bonds lowered the overall root mean square deviation (RMSD) and consequently increased the protein rigidity without affecting the secondary structure of enzyme. This work is expected to provide a viable strategy to avoid the microbial enzyme inactivation caused by the oxidation of the free cysteine residues and improving their performances. IMPORTANCE FDH is widely used for NADH regeneration in dehydrogenase-based synthesis of optically active compounds to decrease the cost of production. This study highlighted a viable strategy that was used to eliminate the oxidation of free cysteine residues of FDH from Candida boidinii by the introduction of disulfide bonds. Using this strategy, we obtained a variant FDH with improved activity and stability. The improvement of activity and stability of FDH is expected to reduce its price and then further to decrease the cost of its application.

Sign in / Sign up

Export Citation Format

Share Document