Experimental Evaluation of Formaldehyde Adsorption Capacity of Synthetic Zeolite

2021 ◽  
Vol 22 (4) ◽  
pp. 250-258
Author(s):  
Jong-Hyun Kim ◽  
Choon-Ki Na ◽  
Jeong-In Lee ◽  
Do-Yong Kim
2018 ◽  
Vol 16 (2) ◽  
pp. 138 ◽  
Author(s):  
Yulius Dala Ngapa ◽  
Sri Sugiarti ◽  
Zaenal Abidin

A synthetic zeolite was produced from natural zeolite from Ende-Nusa Tenggara Timur (NTT) by hydrothermal method. This study aims to produce synthetic zeolite from Ende natural zeolite to remove cation dye through the adsorption process. Temperature of crystal formation (ageing) was performed at 60 °C for 6 h and hydrothermal process was at 100 °C for 24 h. The natural zeolite produced synthetic NaP1 and synthetic Faujasite. Based on the research results, the synthesis of zeolite by the hydrothermal method can enhance the adsorption capacity and Cation Exchange Capacity (CEC). The adsorption capacity in the natural zeolites of type ZG, ZL and ZC before the hydrothermal process were 17.289, 17.276, and 16.483 mg/g, respectively, and after hydrothermal they increased to 37.398, 37.369 and 37.362 mg/g, respectively. In addition, the CEC increased from 84.154, 81.042, and 77.474 cmol/kg, respectively, to 244.063, 216.354, and 211.432 cmol/kg, respectively. The Langmuir model most closely matched the isothermal adsorption equilibrium process.


2016 ◽  
Vol 166 ◽  
pp. 484-492 ◽  
Author(s):  
Kowsalya Vellingiri ◽  
Ki-Hyun Kim ◽  
Eilhann E. Kwon ◽  
Akash Deep ◽  
Sang-Hee Jo ◽  
...  

2017 ◽  
Vol 890 ◽  
pp. 93-97
Author(s):  
Wara Dyah Pita Rengga ◽  
Sri Wahyuni ◽  
Agung Feinnudin

The performance of nanosilver loaded bamboo-based activated carbon as an adsorbent used for the adsorptive removal of formaldehyde in the air. The size porous of the active carbon is predominantly on the size of mesoporous and microporous. Adsorption tests have been evaluated in laboratory scale fixed-bed column, at different temperatures and initial formaldehyde concentration. In order to investigate is both equilibrium and thermodynamic aspects. The experimental data was fitted with Langmuir model and fit well with the adsorption capacity of 91-110 mg/g. The increase in temperature reduces the adsorption capacity. The thermodynamic parameters show that the values of ∆Go obtained to confirm the feasibility of activated carbon effective sorbents of formaldehyde. The formaldehyde adsorption process is exothermic and adsorbent has a good affinity to formaldehyde.


2012 ◽  
Vol 490-495 ◽  
pp. 3495-3499
Author(s):  
Tao Hu ◽  
Yong Yang ◽  
Jian Wen Xia

Modification of attapulgite by KH-570 for formaldehyde adsorption and characterization of the resulting sorbents by SEM, BET, FT-IR and TG-DSC were conducted, as well as the test of the breakthrough curves of formaldehyde dynamic adsorption. The results show that KH570 was grafted with the surface silanol group of attapulgite. The adsorption capacity of attapulgite for formaldehyde was improved significantly by KH-570, which has a certain utility to remove the formaldehyde gas in the air.


Sign in / Sign up

Export Citation Format

Share Document