scholarly journals Clinical Use of a Computer Assisted Anatomic Total Shoulder Arthroplasty System: An Analysis of 574 Cases

10.29007/kld9 ◽  
2019 ◽  
Author(s):  
Alexander Greene ◽  
Sandrine Polakovic ◽  
Christopher Roche ◽  
Yifei Dai
Keyword(s):  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
Preoperative Planning ◽  
Total Shoulder Arthroplasty ◽  
Computer Assisted Surgery ◽  
Computer Assisted ◽  
Glenoid Component ◽  
Implant Placement ◽  
Implant Selection

Accurate reproduction of glenohumeral anatomy during anatomic total shoulder arthroplasty (aTSA) has been shown to correlate with positive clinical outcomes. Preoperative planning and computer assisted surgery (CAS) can improve upon glenoid placement, but such systems for aTSA have experienced limited commercial success. Postoperative surgical reports from the first 574 clinical cases of a commercially available CAS aTSA system were collected and analyzed for implant selection, implant placement, and incision start to incision close operative time, and compared to similar date cohorts for non-navigated cases. Navigated aTSA cases had a significantly longer incision time than non-navigated cases. Augmented glenoid components were used in a much higher percentage of navigated cases than non-navigated cases, suggesting that augmented glenoid components provide utility for correcting pathologic glenoid wear. The average resultant version of the implanted component increased with the size of augment used, suggesting there may not be a clear consensus on optimal retroversion. term clinical follow up will need to be collected to determine if preoperative planning combined with more precise and accurate glenoid component positioning leads to improved clinical outcomes and implant longevity.

scholarly journals Clinical Use of a Computer Assisted Reverse Total Shoulder Arthroplasty System: an Analysis of 1702 Cases

10.29007/hcd6 ◽  
2019 ◽  
Author(s):  
Alexander Greene ◽  
Sandrine Polakovic ◽  
Christopher Roche ◽  
Yifei Dai
Keyword(s):  
Shoulder Arthroplasty ◽  
Preoperative Planning ◽  
Total Shoulder Arthroplasty ◽  
Computer Assisted Surgery ◽  
Reverse Total Shoulder Arthroplasty ◽  
Computer Assisted ◽  
Glenoid Component ◽  
Implant Placement ◽  
Implant Selection ◽  
Reverse Total Shoulder

Placement of the glenoid component in reverse total shoulder arthroplasty (rTSA) is of paramount importance and can affect a patient’s range of motion postoperatively. Preoperative planning and computer assisted surgery (CAS) can improve upon glenoid placement, but such systems for rTSA have experienced limited commercial success. Postoperative surgical reports from the first 1702 clinical cases of a commercially available CAS rTSA system were collected and analyzed for implant selection, implant placement, and incision start to incision close operative time, and compared to similar date cohorts for non-navigated cases. Navigated rTSA cases had a significantly longer incision time than non-navigated cases. Augmented glenoid components were used in a much higher percentage of navigated cases than non-navigated cases, suggesting that augmented glenoid components provide utility for correcting pathologic glenoid wear. The average resultant version and inclination of the implanted component increased with the size of augment used, suggesting there may not be a clear consensus on optimal version or inclination. Long term clinical follow up will need to be collected to determine if preoperative planning combined with more precise and accurate glenoid component positioning leads to improved clinical outcomes and implant longevity.

scholarly journals Mid-term outcomes of bony increased offset-reverse total shoulder arthroplasty in the Asian population

2021 ◽  
Vol 24 (3) ◽  
pp. 125-134
Author(s):  
Kirtan Tankshali ◽  
Dong-Whan Suh ◽  
Jong-Hun Ji ◽  
Chang-Yeon Kim
Keyword(s):  
Los Angeles ◽  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
Intraoperative Complications ◽  
Total Shoulder Arthroplasty ◽  
Asian Population ◽  
Reverse Total Shoulder Arthroplasty ◽  
Scapular Notching ◽  
Reverse Total Shoulder

Background: To evaluate clinical and radiological outcomes of bony increased offset-reverse total shoulder arthroplasty (BIO-RSA) in the Asian population at mid-term follow-up.Methods: From June 2012 to August 2017 at a single center, 43 patients underwent BIO-RSA, and 38 patients with a minimum of 2 years of follow-up were enrolled. We evaluated the preoperative and postoperative clinical outcomes, radiological outcomes (notching and loosening), and complications of BIO-RSA at the last follow-up. In addition, we divided these patients into notching and not-notching groups and compared the demographics, preoperative, and postoperative characteristics of patients between the two groups.Results: Visual analog scale, American Shoulder and Elbow Surgeons, University of California-Los Angeles, and Simple Shoulder Test scores improved significantly from preoperative (average: 5, 39.43, 16.22, 3.94) to postoperative (average: 1.71, 78.91, 28.34, 7.8; p<0.05) outcomes. All range of motion except internal rotation improved significantly at the final follow-up (p<0.05), and the bone graft was well-incorporated with the native glenoid in all patients (100%). However, scapular notching was observed in 20/38 patients (53%). In the comparison between notching and not-notching groups (18 vs. 20 patients), there were no significant differences in demographics, radiological parameters, and clinical outcomes except acromion-greater tuberosity (AT) distance (p=0.003). Intraoperative complications were three metaphyseal fractures and one inferior screw malposition. Postoperative complications included one heterotopic ossification, one scapula neck stress fracture, one humeral stem loosening, and one late infection.Conclusions: BIO-RSA resulted in improved clinical outcomes at mid-term follow-up in the Asian population. Although better cosmesis and advantages of glenoid lateralization were observed, we observed higher rates of scapular notching compared to previously reported rates in BIO-RSA studies. In addition, adequate glenoid lateralization with appropriate humeral lengthening (AT distance) might reduce scapular notching.

Anatomic total shoulder arthroplasty with an inlay glenoid component: clinical outcomes and return to activity

2020 ◽  
Vol 29 (6) ◽  
pp. 1188-1196 ◽  
Author(s):  
Gregory L. Cvetanovich ◽  
Amanda J. Naylor ◽  
Michael C. O'Brien ◽  
Brian R. Waterman ◽  
Grant H. Garcia ◽  
...  
Keyword(s):  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Glenoid Component ◽  
Return To Activity

Radiographic and clinical outcomes of second generation Trabecular Metal™ glenoid components in total shoulder arthroplasty

2020 ◽  
pp. 175857322090998
Author(s):  
Raymond E Chen ◽  
Alexander M Brown ◽  
Alexander S Greenstein ◽  
Sandeep Mannava ◽  
Ilya Voloshin
Keyword(s):  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
Second Generation ◽  
Total Shoulder Arthroplasty ◽  
Implant Survival ◽  
Trabecular Metal ◽  
Metal Debris ◽  
Shoulder Range Of Motion ◽  
Shoulder Range

Background Total shoulder arthroplasty with second generation porous tantalum glenoid implants (Trabecular Metal™) has shown good short-term outcomes, but mid-term outcomes are unknown. This study describes the clinical, radiographic, and patient-rated mid-term outcomes of total shoulder arthroplasty utilizing cemented Trabecular Metal™ glenoid components. Methods Patients who underwent anatomic total shoulder arthroplasty with cemented Trabecular Metal™ glenoid components for primary osteoarthritis were identified for minimum five-year follow-up. The primary outcome measure was implant survival; secondary outcome measures included patient-rated outcome scores, shoulder range of motion findings, and radiographic analysis. Results Twenty-seven patients were enrolled in the study. Twenty-one patients had full radiographic follow-up. Mean follow-up was 6.6 years. There was 100% implant survival. Shoulder range of motion significantly improved and the mean American Shoulder and Elbow Society score was 89.8. There was presence of metal debris radiographically in 24% of patients. Twenty-nine percent of patients had evidence of radiolucency. Fourteen percent of patients had moderate superior subluxation. Conclusion Total shoulder arthroplasty with second generation cemented Trabecular Metal™ glenoid components yielded good outcomes at mean 6.6-year follow-up. Metal debris incidence and clinical outcomes were similar to short-term findings. The presence of metal debris did not significantly affect clinical outcomes. Continued observation of these patients will elucidate longer-term implant survival.

Bilateral total shoulder arthroplasty: A systematic review of clinical outcomes

2020 ◽  
pp. 175857322091682
Author(s):  
John-Rudolph H Smith ◽  
Darby A Houck ◽  
Jessica A Hart ◽  
Jonathan T Bravman ◽  
Rachel M Frank ◽  
...  
Keyword(s):  
Patient Satisfaction ◽  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
English Language ◽  
External Rotation ◽  
Total Shoulder Arthroplasty ◽  
Cochrane Library ◽  
Level Of Evidence ◽  
Patient Reported

Background The purpose of this study was to describe the clinical outcomes following bilateral total shoulder arthroplasty (TSA). Methods A systematic search of the PubMed, Embase, and Cochrane Library databases following PRISMA guidelines was performed. English-language literature published from 2010 to 2018 analyzing bilateral TSA (anatomic and/or reverse) with a minimum one-year follow-up was reviewed by two independent reviewers. Study quality was evaluated with the Modified Coleman Methodology Score and the methodological index for non-randomized studies score. Results Eleven studies (1 Level II, 3 Level III, 7 Level IV) with 292 patients were included. Two studies reported on bilateral anatomic TSA ( n = 54), six reported on bilateral reverse TSA (RTSA; n = 168), two reported on anatomic TSA with contralateral RTSA (TSA/RTSA; n = 31), and one compared bilateral anatomic TSA ( n = 26) and bilateral RTSA ( n = 13). Among studies, mean revision rate ranged from 0% to 10.53% and mean complication rate ranged from 4.9% to 31.3%. At final follow-up, patients experienced significant overall improvements in range of motion and patient-reported outcome score measurements. However, bilateral anatomic TSA resulted in greater improvements in external rotation compared to bilateral RTSA. Overall patient satisfaction was 91.0%. Conclusion The available data indicate that bilateral TSA allows for functional and pain improvements and result in high patient satisfaction. Level of evidence IV.

scholarly journals Anatomic Total Shoulder Arthroplasty Using a Self-Pressurizing Pegged Bone-Preserving Cemented Glenoid Component: A 2- to 5-Year Follow-up Study

2018 ◽  
Vol 2 ◽  
pp. 247154921775047
Author(s):  
Joaquin Sanchez-Sotelo ◽  
Ngoc Tram V Nguyen ◽  
Mark Morrey
Keyword(s):  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Total Shoulder Arthroplasty ◽  
Loose Body ◽  
Deep Infection ◽  
Glenoid Component ◽  
Total Shoulder Arthroplasties ◽  
Shoulder Arthroplasties ◽  
And Function

Background: High rates of radiographic loosening have been reported with various glenoid designs. Many available designs sacrifice most of the bone at the central portion of the glenoid vault, creating large areas of deficiency when revision becomes necessary. The purpose of this study was to report the 2- to 5-year outcome of shoulder arthroplasty using a bone-preserving all-polyethylene glenoid components with self-pressurizing pegs. Methods: Between August 2011 and December 2014, 202 consecutive anatomic total shoulder arthroplasties (TSAs) were performed by a single surgeon with implantation of a self-pressurizing cemented pegged glenoid component in 190 patients (12 patients had both shoulders replaced). Patients were followed up prospectively and evaluated for pain, motion, strength, American Shoulder and Elbow Surgeons (ASES) scores, and radiographic changes. The mean follow-up time was 2.7 (2–5) years. Results: TSA improved pain and function reliably. At the most recent follow-up, 94% of the shoulders had no or mild pain. Motion included 154 ± 25° of elevation, 68 ± 18° of external rotation, and median internal rotation to T10 (range, iliac crest to T4). The most recent average ASES score was 82 ± 15 points. Early postoperative radiographs showed no radiolucent lines. No humeral or glenoid component was considered radiographically loose at the most recent follow-up. Complications requiring reoperation included subscapularis insufficiency (4), posterior instability (2), deep infection (1), stiffness (1), and a painful loose body (1). No components were revised for loosening. Conclusions: Anatomic TSA using a cemented bone-preserving all-polyethylene pegged self-pressurizing glenoid component provided satisfactory clinical outcomes and survival at 2 to 5 years.

scholarly journals Anatomical total shoulder arthroplasty in young patients with osteoarthritis

2018 ◽  
Vol 100-B (4) ◽  
pp. 485-492 ◽  
Author(s):  
M. O. Gauci ◽  
N. Bonnevialle ◽  
G. Moineau ◽  
M. Baba ◽  
G. Walch ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
Polyethylene Wear ◽  
Total Shoulder Arthroplasty ◽  
Young Patients ◽  
Glenoid Component ◽  
Implant Survival ◽  
Survivorship Analysis ◽  
Kaplan Meier ◽  
Glenoid Loosening

Aims Controversy about the use of an anatomical total shoulder arthroplasty (aTSA) in young arthritic patients relates to which is the ideal form of fixation for the glenoid component: cemented or cementless. This study aimed to evaluate implant survival of aTSA when used in patients aged < 60 years with primary glenohumeral osteoarthritis (OA), and to compare the survival of cemented all-polyethylene and cementless metal-backed glenoid components. Materials and Methods A total of 69 consecutive aTSAs were performed in 67 patients aged < 60 years with primary glenohumeral OA. Their mean age at the time of surgery was 54 years (35 to 60). Of these aTSAs, 46 were undertaken using a cemented polyethylene component and 23 were undertaken using a cementless metal-backed component. The age, gender, preoperative function, mobility, premorbid glenoid erosion, and length of follow-up were comparable in the two groups. The patients were reviewed clinically and radiographically at a mean of 10.3 years (5 to 12, sd 26) postoperatively. Kaplan–Meier survivorship analysis was performed with revision as the endpoint. Results A total of 26 shoulders (38%) underwent revision surgery: ten (22%) in the polyethylene group and 16 (70%) in the metal-backed group (p < 0.0001). At 12 years’ follow-up, the rate of implant survival was 74% (sd 0.09) for polyethylene components and 24% (sd 0.10) for metal-backed components (p < 0.0002). Glenoid loosening or failure was the indication for revision in the polyethylene group, whereas polyethylene wear with metal-on-metal contact, instability, and insufficiency of the rotator cuff were the indications for revision in the metal-backed group. Preoperative posterior subluxation of the humeral head with a biconcave/retroverted glenoid (Walch B2) had an adverse effect on the survival of a metal-backed component. Conclusion The survival of a cemented polyethylene glenoid component is three times higher than that of a cementless metal-backed glenoid component ten years after aTSA in patients aged < 60 years with primary glenohumeral OA. Patients with a biconcave (B2) glenoid have the highest risk of failure. Cite this article: Bone Joint J 2018;100-B:485–92.

scholarly journals Medium to long-term results of a recessed glenoid for glenoid resurfacing in total shoulder arthroplasty

2019 ◽  
Vol 12 (1_suppl) ◽  
pp. 31-39
Author(s):  
Mark Ross ◽  
Jean-Marc Glasson ◽  
Justin Alexander ◽  
Christopher G Conyard ◽  
Benjamin Hope ◽  
...  
Keyword(s):  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Long Term Results ◽  
Shoulder Replacement ◽  
Shoulder Hemiarthroplasty ◽  
Total Shoulder Replacement ◽  
Implant Survivorship

Background Recessed mini-glenoid components provide an alternative to total shoulder replacement that may avoid some of the known shortcomings and complications associated with shoulder hemiarthroplasty or standard glenoid components in difficult cases. This study reports survivorship, radiological and clinical outcomes of a recessed mini-glenoid implant in a consecutive cohort. Methods Retrospective cohort study reporting outcomes of 28 consecutive shoulders (27 patients) following total shoulder replacement using a recessed, cemented mini-glenoid implant at two sites. Results The most frequent diagnosis was primary osteoarthritis (79%); glenoid morphology was Walch Type A (67%), B1 15%, B2 10% and C 10%. At final follow-up, pain was 16.3 (SD = 23.1), American Shoulder and Elbow Score was 64.5 (SD = 31.9) and (normalized) Constant score was 83.0 (SD = 20.7). Implant survivorship at average final follow-up of seven years (3–13) was 96.4%. Seven mini-glenoids showed small peripheral radiolucent lines at one-year X-ray follow-up but were non-progressive on subsequent imaging. Discussion Recessed polyethylene mini-glenoid is an attractive alternative for shoulder arthroplasty and provides an intermediate solution between standard glenoid components and hemiarthroplasty. Our medium to long-term results demonstrate reliable clinical outcomes, absence of glenoid erosion, low complication rate and satisfactory implant survivorship.

Sign in / Sign up

Export Citation Format

Share Document