Growth of Seaweed Codium sp in Super Intensive Shrimp Pond Liquid Waste

Author(s):  
Fauzia Nur ◽  
Rajuddin Syamsuddin ◽  
Rustam .
Keyword(s):  
2012 ◽  
Vol 2 (1) ◽  
Author(s):  
Salahuddin, Chafid Fandeli, dan Eko Sugiharto

well-managed, it will contribute to the improvement of both regional and national economy. However, MahakamRiver gets liquid waste pollution that has significant impact on water quality and results in conflicts betweenthe local societies, especially the shrimp pond farmers and the fishermen and the oil and gas industrial company.This research uses descriptive-comparative analysis with ANOVA test to compare samples (water, soil/sediment,shrimp, and mangrove) of the shrimp fishpond (many mangrove, moderate mangrove, few mangrove, and withoutany mangrove). The pollution load which is analyzed includes: cadmium content (Cd), lead (Pb), oil and grease (O& G), mercury (Hg), and arsenic (As). The significance level is 90% with error of 5% (0.05).The water of Mahakam Delta is still in the normality limit as seen from the maximum pollution load in the Decreeof the Minister of Living Environment No. 51 of 2004 on Ocean Water Standard seen from chemical, physical,and biological parameters. The presence of mangrove contributes positive value to the balance of the quality of thewaters and to the neutralizing of heavy metals contents of Mahakam Delta as shown in the average difference inthe Pb, Cd, O & G, As and Hg of the samples of water, soils/sediment, shrimp and mangrove which are drawnfrom the of shrimp pond with many mangrove, moderate mangrove, few mangrove and without any mangrove,which is significantly different (p < 0.05). Shrimp pond with many mangrove has less average levels of Pb, Cd, M& L, As and Hg compared with the pond with less and without mangrove. The shrimp pond with many mangrovescontributes significantly and positively to the prevention of the pollution of Pb, Cd, O and G, As and Hg at low level


1986 ◽  
Vol 84 ◽  
Author(s):  
Masahiro Okamoto ◽  
Koichi Chino ◽  
Tsutomu Baba ◽  
Tatsuo Izumida ◽  
Fumio Kawamura ◽  
...  

AbstractA new solidification technique using cement-glass, which is a mixture of sodium silicate, cement, additives, and initiator of the solidification reaction, was developed for sodium borate liquid waste generated from pressurized water reactor (PWR) plants. The cement-glass could solidify eight times as much sodium borate as cement could, because the solidifying reaction of the cement-glass is not hindered by borate ions.The reaction mechanism of sodium silicate and phosphoric silicate (initiator), the main components of cement-glass, was studied through X-ray diffraction and compressive strength measurements. It was found that three- dimensionally bonded silicon dioxide was produced by polymerization of the two silicates. The leaching ratio of cesium from the cement-glass package was one-tenth that of the cement one. This low value was attributed to a high cesium adsorption ability of the cement-glass and it could be theoretically predicted accordingly.


2018 ◽  
Vol 6 (2) ◽  
Author(s):  
Arie Herlambang

Basically, nature has the ability to perform the restoration of environmental damage caused by increased human activity, but because of the limited carrying capacity, then the environment has decreased the quality from year to year. In saving the environment, technology plays a role in reducing the risk of pollution, increased efi siensi process, and creating processes and environmentall friendly products, monitoring and prediction of environment quality, environmental pollution control, restoration and environmental improvement. Waste Technology (end of pipe technology) are widely used to cope with environmental pollution, both for liquid waste, solid and air. Waste processing technology developed for the waste can be in accordance with quality standards thathave been established, while monitoring technology has been developed either manually or automatically. For recovery and improvement of technology has been developed remedies and restoration that rely on bacteria in nature.Keywords: end of pipe technology, reuse, recycle, reduce (3R), carrying capacity, and environment pollution


2003 ◽  
Vol 792 ◽  
Author(s):  
V. Aubin ◽  
D. Caurant ◽  
D. Gourier ◽  
N. Baffier ◽  
S. Esnouf ◽  
...  

ABSTRACTProgress on separating the long-lived fission products from the high level radioactive liquid waste (HLW) has led to the development of specific host matrices, notably for the immobilization of cesium. Hollandite (nominally BaAl2Ti6O16), one of the main phases constituting Synroc, receives renewed interest as specific Cs-host wasteform. The radioactive cesium isotopes consist of short-lived Cs and Cs of high activities and Cs with long lifetime, all decaying according to Cs+→Ba2++e- (β) + γ. Therefore, Cs-host forms must be both heat and (β,γ)-radiation resistant. The purpose of this study is to estimate the stability of single phase hollandite under external β and γ radiation, simulating the decay of Cs. A hollandite ceramic of simple composition (Ba1.16Al2.32Ti5.68O16) was essentially irradiated by 1 and 2.5 MeV electrons with different fluences to simulate the β particles emitted by cesium. The generation of point defects was then followed by Electron Paramagnetic Resonance (EPR). All these electron irradiations generated defects of the same nature (oxygen centers and Ti3+ ions) but in different proportions varying with electron energy and fluence. The annealing of irradiated samples lead to the disappearance of the latter defects but gave rise to two other types of defects (aggregates of light elements and titanyl ions). It is necessary to heat at relatively high temperature (T=800°C) to recover an EPR spectrum similar to that of the pristine material. The stability of hollandite phase under radioactive cesium irradiation during the waste storage is discussed.


Sign in / Sign up

Export Citation Format

Share Document