scholarly journals The Simulation Design of the Microstrip Antenna Based on The New Left-Handed Structure

Author(s):  
Zhiliang Song ◽  
Chuanfang Bai ◽  
Rongtao Gao ◽  
Xianfeng Zeng
2017 ◽  
Vol 9 (8) ◽  
pp. 1705-1712
Author(s):  
Haixiong Li ◽  
Yunlong Gong ◽  
Jiakai Zhang ◽  
Jun Ding ◽  
Chenjiang Guo

In this study, a dual-layered polarization and frequency reconfigurable microstrip antenna is proposed based on sequential mechanical axial rotation of the circular metal radiator. The antenna can be reconfigured among three different polarized modes, including the linear polarization (LP), left-handed circular polarization and right-handed circular polarization in the band from 4.68 to 4.80 GHz (2.53%). The resonance frequency of the proposed antenna with the same LP mode could also be tuned in the range from 4.70 to 5.03 GHz by mechanical rotation of the breach-truncated circular metal radiator as well as the circular substrate. Furthermore, the polarization characteristic and frequency can be reconfigured, respectively, as the circular radiator is taken an axial rotation with an angle of 360°. The presented antenna in the four different states has been numerically simulated and fabricated for the experimental measurement, the investigated characteristics includes the port reflection coefficient, axial ratio, radiation pattern, gain, and the radiation efficiency. The simulated and test results agreed well with each other. This antenna enriches the novel mechanical reconfigurable method except for the popular electrical approach.


2019 ◽  
Vol 2019 (19) ◽  
pp. 6218-6221
Author(s):  
Vladimir Y. Abramov ◽  
Dmitriy S. Klyuev ◽  
Anatoly M. Neshcheret ◽  
Oleg V. Osipov ◽  
Alexander A. Potapov

2015 ◽  
Vol 8 (8) ◽  
pp. 1253-1263 ◽  
Author(s):  
R. Hafezifard ◽  
Jalil Rashed-Mohassel ◽  
Mohammad Naser-Moghadasi ◽  
R. A. Sadeghzadeh

A circularly polarized (CP) and high gain Microstrip antenna is designed in this paper using metamaterial concepts. The antenna, built on a metamaterial substrate, showed significant size reduction and less mutual coupling in an array compared with similar arrays on conventional substrates. Demonstrated to have left-handed magnetic characteristics, the methodology uses complementary split-ring resonators (SRRs) placed horizontally between the patch and the ground plane. In order to reduce mutual coupling in the array structure, hexagonal-SRRs are embedded between antenna elements. The procedure is shown to have great impact on the antenna performance specifically its bandwidth which is broadened from 400 MHz to 1.2 GHz for X-band and as well as its efficiency. The structure has also low loss and improved standing wave ratio and less mutual coupling. The results show that a reduction of 26.6 dB in mutual coupling is obtained between elements at the operation frequency of the array. Experimental data show a reasonably good agreement between simulation and measured results.


Author(s):  
Nabilah Abdul Jaffar ◽  
Norlida Buniyamin ◽  
Kasumawati Lias

This paper presents the outcome of a literature review that an overview of various types of antenna and metamaterial applicator performance towards cancerous tissue or cell for non-invasive hyperthermia cancer treatment (NIHCT) procedure. From the review, it shows that when LHM lens integrated with an antenna, focusing capabilities of the antenna towards the cancerous area can be improved. However, current applicators have a poor focusing effect when directed towards the actual tumor area. In conjunction with that, this paper proposes a new design of modified applicator that is microstrip antenna integrated with left-handed metamaterial (LHM) lens. The antenna termed microstrip-LHM (M-LHM) lens antenna is proposed for use in NIHCT. It is expected to improve the focusing capabilities of an antenna which is used to kill the cancerous area and thus improve the hyperthermia cancer treatment procedure success rate. In addition, this paper provides an overview of heating techniques used in hyperthermia to enhance focusing capabilities and a few metamaterial advantages that can improve the focusing effect and reduced the hot-spots. Specific Absorption Rate (SAR) will be investigated to evaluate the focusing abilities of the proposed applicator using the SEMCAD X Solver.


2019 ◽  
Vol 61 (6) ◽  
pp. 1559-1565 ◽  
Author(s):  
Jia Kai Zhang ◽  
Jia Chen Xu ◽  
Jun Ding ◽  
Chen Jiang Guo

Sign in / Sign up

Export Citation Format

Share Document