scholarly journals Electrochemical performances discharged to lower potential for LiNi0.5Mn1.5O4 cathode material synthesized by PAA-assisted co-precipitation method

2015 ◽  
Author(s):  
Zhen Wang ◽  
Weiquan Shao ◽  
Shaou Chen ◽  
Lizhu He ◽  
Hongliang Li ◽  
...  
Keyword(s):  
Cathode Material ◽  
Precipitation Method ◽  
Electrochemical Performances ◽  
Co Precipitation

Synthesis and Electrochemical Properties of 0.5Li2MnO3•0.5LiMn0.5Ni0.5O2

2010 ◽  
Vol 105-106 ◽  
pp. 664-667
Author(s):  
Sheng Wen Zhong ◽  
Wei Hu ◽  
Qian Zhang
Keyword(s):  
Cathode Material ◽  
Electrochemical Properties ◽  
Specific Capacity ◽  
Precipitation Method ◽  
Electrochemical Performances ◽  
Discharge Specific Capacity ◽  
Xrd Patterns ◽  
Co Precipitation ◽  
Two Stages ◽  
Calcined Temperature

The precursor of Mn0.75Ni0.25CO3 is prepared by carbonate co-precipitation method. And the cathode material 0.5Li2MnO3•0.5LiMn0.5Ni0.5O2 is synthesized with two stages calcining temperatures T1 and T2. T1 represents 400°C, 500°C, 600°C and T2 is selected at 750°C, 850°C, 950°C respectively. XRD Patterns shows that the cathode material has the integrated structures of Li2MnO3 and LiMO2, and it has better crystallization during the rise of calcined temperature at 950°C. The electrochemical performances tests indicates that the initial discharge specific capacity are greater than 220mAh/g at the current density 0.2 mA/cm2 in 2.5-4.6V at room temperature. When cathode material is calcined at 750°C, its discharge specific capacity even reach to 248mAh/g, but the cathode material has more perfect general electrochemical properties during calcined temperature at 950°C.

Novel solvo/hydrothermal assisted co-precipitation method for faceted LiNi1/3Mn1/3Co1/3O2 cathode material

2015 ◽  
Vol 627 ◽  
pp. 206-210 ◽  
Author(s):  
Ruirui Zhao ◽  
Zilian Yang ◽  
JinCan Chen ◽  
Zhanjun Chen ◽  
Jiaxing Liang ◽  
...  
Keyword(s):  
Cathode Material ◽  
Precipitation Method ◽  
Co Precipitation

Preparation and Electrochemical Performance of Mn3O4/GR Composites Electrode Material in Supercapacitors

2019 ◽  
Vol 807 ◽  
pp. 50-56
Author(s):  
Yun Long Zhou ◽  
Zhi Biao Hu ◽  
Li Mei Wu ◽  
Jiao Hao Wu
Keyword(s):  
Room Temperature ◽  
Raw Materials ◽  
Precipitation Method ◽  
Electrochemical Performances ◽  
Manganese Sulfate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Co Precipitation ◽  
A Current ◽  
Discharge Test

Using hydrated manganese sulfate and general type graphene (GR) as raw materials, Mn3O4/GR composite has been successfully prepared by the liquid phase chemical co-precipitation method at room temperature. X-ray diffraction (XRD) was used to investigate the phase structure of Mn3O4powder and Mn3O4/GR composite; The electrochemical performances of the samples were elucidated by cyclic voltammetry and galvanostatic charge-discharge test in 0.5 mol/L Na2SO4electrolyte. The results show that the Mn3O4/GR composite possesses graphene phase and good reversibility; the composite also displays a specific capacitance of 318.8 F/g at a current density of 1 A/g.

Electrochemical Properties of Nanocrystalline Y2-xPrxRu2O7 Pyrochlore for Electrodic Application in IT-SOFCS

2006 ◽  
Vol 972 ◽  
Author(s):  
Chiara Abate ◽  
Keith Duncan ◽  
Enrico Traversa ◽  
Eric Wachsman
Keyword(s):  
Cathode Material ◽  
Phase Boundary ◽  
Electrochemical Impedance ◽  
Charge Transfer Resistance ◽  
Nanocrystalline Powders ◽  
Precipitation Method ◽  
Electrode Polarization ◽  
Transfer Resistance ◽  
Triple Phase Boundary ◽  
Co Precipitation

AbstractNanocrystalline powders of Y2-xPrxRu2O7 were prepared by a co-precipitation method, and were tested as electrode on ESB and GDC electrolytes by electrochemical impedance spectroscopy in the 300-750°C temperatures range. The electrode polarization was studied as a function of the amount of praseodymium in the cathode material. Both systems, Y2-xPrxRu2O7/ESB and Y2-xPrxRu2O7/GDC, showed a similar variation of the electrode area specific resistance (ASR). Y1.5Pr0.5Ru2O7 cathode material presented the best performance, with ASR value of 0.19 Ωcm2 on ESB and 4.23 Ωcm2 on GDC at 700°C. Furthermore, the change in ASR with the oxygen partial pressure suggested that the rate limiting step is the surface diffusion of the adsorbed oxygen at the electrode surface to the triple-phase boundary. Thus, the low value of resistivity of the Y1.5Pr0.5Ru2O7 in contact with ESB results from a much lower charge transfer resistance compared to the Y2-xPrxRu2O7/GDC system, and a partial solid diffusion at the interface electrode/electrolyte that increases the effective triple phase boundary length. This suggests that Y2-xPrxRu2O7 is a promising material for cathode application in ESB-based electrolyte for intermediate temperature solid oxide fuel cells (IT-SOFCs).

Graphene modified Li-rich cathode material Li[Li0.26Ni0.07Co0.07Mn0.56]O2 for lithium ion battery

2014 ◽  
Vol 07 (06) ◽  
pp. 1440013 ◽  
Author(s):  
Xiangjun Li ◽  
Hongxing Xin ◽  
Xiaoying Qin ◽  
Xueqin Yuan ◽  
Di Li ◽  
...  
Keyword(s):  
Electrochemical Impedance ◽  
Rate Capability ◽  
Lithium Ion ◽  
Cycling Performance ◽  
Precipitation Method ◽  
Electrochemical Performances ◽  
Charge Transfer Reaction ◽  
Ion Diffusion ◽  
Co Precipitation ◽  
Kinetics Of

Lithium and Mn rich solid solution materials Li [ Li 0.26 Ni 0.07 Co 0.07 Mn 0.56] O 2 were synthesized by a carbonate co-precipitation method and modified with a layer of graphene. The graphene-modified cathodes exhibit improved rate capability and cycling performance as compared to the bare cathodes. Electrochemical impedance spectroscopy (EIS) analyses reveal that the improved electrochemical performances are due to acceleration kinetics of lithium-ion diffusion and the charge transfer reaction of the graphene-modified cathodes.

Sign in / Sign up

Export Citation Format

Share Document