scholarly journals Analisis Lalu Lintas pada Ruas Jalan Lingkar Sicincin-Lubuk Alung Kab.Padang Pariaman untuk Disain Perkerasan

2019 ◽  
Vol 14 (2) ◽  
pp. 1
Author(s):  
Dwina Archenita
Keyword(s):  
Pavement Design ◽  
Traffic Load ◽  
Survey Period ◽  
Ring Road ◽  
The Road ◽  
Road Pavement ◽  
Road Section ◽  
On The Road ◽  
Subgrade Strength

Traffic is an important part of road pavement design in addition to subgrade strength. This is because traffic is a burden for the road and is very decisive in the thick planning of each layer of pavement. Thus the calculation of the traffic load should have been carried out before carrying out the design of the pavement. The Sicincin - Lubuk Alung ring road section located in Kab.Padang Pariaman is one of the road sections designed with pavement design. Therefore, a traffic survey was carried out on the road section. Traffic surveys are carried out for three days, two days on weekdays and one day on holidays. Every day the survey time is divided into three times, morning, afternoon and evening at rush hour. The survey in the morning takes place at 07:15 - 08:15 and 08:15 - 09:15 while in the afternoon it takes place at 13:00 - 14:00 and 14:00 - 15:00. Furthermore, for the afternoon survey, it will be held at 16:00 - 17:00 and 17:00 - 18:00. After processing the data, in each survey period the LHR value is obtained for both directions. The LHR value used for pavement design is the largest LHR value of all LHR values obtained.

scholarly journals Road improvement from flexible pavement to rigid on Munjul - Panimbang Road Banten

2019 ◽  
Vol 270 ◽  
pp. 03007
Author(s):  
Telly Rosdiyani ◽  
Gunawan Noor ◽  
Irja Iswan
Keyword(s):  
Regional Development ◽  
Secondary Data ◽  
Concrete Pavement ◽  
Public Welfare ◽  
Primary Data ◽  
The Road ◽  
Road Pavement ◽  
Concrete Plate ◽  
Road Section ◽  
On The Road

Roads are an important element in promoting public welfare. With the approach of regional development, the achievement of balance and equitable regional development. Munjul-Panimbang Road Section, a crossroads of tourist access and liaison between villages and sub-districts, this certainly requires an increase in roads in facilitating transportation mobility. Improving the pavement structure that has been declining is one of the solutions that must be done immediately by replacing the pavement flexure structure into concrete pavement (Rigit Pavement). This project has been completed, thereby analyzing the suitability of the Concrete Pavement Road Pavement Planning. This road improvement uses the Concrete Pavement Concatenated Pavement (BBDT) type, stretching the thickness of concrete plate and the required reinforcement diameter. The research method based on Concrete Pavement Concrete Pavement Planning, Pd T-14 2003. Primary data and secondary data are needed as supporting in research. The result of the analysis shows that concrete pavement planning is 15 cm thick concrete plaster and perforated reinforcement per meter using 5D15 mm - 200 mm, while crosslinks per meter of 2D10 mm - 500 mm can withstand the burden of vehicles traveling on the road with the age of 20 years.

scholarly journals EVALUASI KERUSAKAN PERKERASAN LENTUR RUAS TOL JAKARTA-CIKAMPEK DAN ALTERNATIF PENANGANANNYA

2021 ◽  
Vol 4 (4) ◽  
pp. 837
Author(s):  
Hans Hendito ◽  
Anissa Noor Tajudin
Keyword(s):  
Traffic Load ◽  
Pavement Condition ◽  
The Road ◽  
Toll Road ◽  
Road Pavement ◽  
A Value ◽  
Design Life ◽  
Common Causes ◽  
On The Road ◽  
Range Of Values

The most common causes of road damage are the design life of the road that has been passed, waterlogging on the road due to poor drainage, or even traffic load which can cause the service life of the road to be shorter than planned. To find out the conditions on the Jakarta-Cikampek Toll Road. Calculates the value of road pavement conditions calculated using the Indeks Kondisi Perkerasan (IKP) on the Jakarta-Cikampek Toll Road. To find out what kind of treatment we should do for the damage that occurs. The Indeks Kondisi Perkerasan is a quantitative indicator of pavement conditions that has a range of values ranging from 0 – 100, with a value of 0 representing the worst pavement condition while 100 representing the best pavement condition. The IKP method has a level of handling type for each IKP value. According to the IKP guidelines, the type of handling that must be carried out with an average IKP value of 96,32 is routine maintenance. For further research, it’s necessary to conduct a direct survey, so that accurate results can be obtained. It is necessary to study with various methods to be able to compare the level of accuracy of a method. ABSTRAKPenyebab kerusakan jalan yang paling umum adalah umur rencana jalan yang telah dilewati, genangan air pada jalan yang diakibatkan drainase yang buruk, atau bahkan beban lalu lintas yang berlebihan yang dapat menyebabkan umur pakai jalan akan menjadi lebih pendek daripada perencanaannya. Untuk mengetahui kondisi pada jalan Tol Jakarta-Cikampek. Menghitung nilai kondisi perkerasan jalan jika dihitung dengan Indeks Kondisi Perkerasan (IKP) pada ruas Tol Jakarta-Cikampek. Untuk mengetahui penanganan seperti apa yang harus kita lakukan terhadap kerusakan yang terjadi. Kondisi Perkerasan atau IKP adalah indikator kuantitatif (numerik) kondisi perkerasan yang mempunyai rentang nilai mulai 0 – 100, dengan nilai 0 nya menyatakan kondisi perkerasan paling jelek sementara 100 menyatakan kondisi perkerasan terbaik. Metode IKP memiliki tingkat jenis penanganan tiap nilai IKP. Menurut pedoman IKP, jenis penanganan yang harus dilakukan dengan nilai IKP rata-rata 96,32 adalah pemeliharaan rutin. Untuk penelitian selanjutnya, perlu untuk survei secara langsung, supaya hasil yang didapat lebih maksimal. Perlu diteliti dengan metode yang beragam untuk dapat membandingkan tingkat keakuratan sebuah metode.

scholarly journals Laboratory Study of the Use of Additional Reacted and Activated Rubber (RAR) Materials on Asphalt Concrete-Wearing Course (AC-WC) Mix

2019 ◽  
Vol 2 (1) ◽  
pp. 10
Author(s):  
Bayu Tirta Leksana Purnomo ◽  
Latif Budi Suparman ◽  
Agus Taufik Mulyono
Keyword(s):  
Structural Damage ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Traffic Load ◽  
Infrastructure Development ◽  
The Road ◽  
Road Pavement ◽  
The Government ◽  
On The Road ◽  
Under Construction

<em>The development of infrastructure in Indonesia was increasing. The government focuses on boosting infrastructure development to create long-term economic growth. Therefore, a qualified infrastructure was a standard of an advanced rapidly economy. One of them is under construction was road and toll road infrastructure. As a result of the development was the occurrence of the increasing volume of vehicles on the road. Due to this resulting in an increased load reposition and also increased vehicle load on the road, it was then combined with a wet tropical climate or humid warm areas in Indonesia that have high rainfall and temperatures that can reach 38<sup>o</sup>C, resulting in structural damage such as cracks, rutting, stripping, and pothole. Performance from pavement also declined faster than the estimated plan. Roads in Indonesia mostly use the type of concrete asphalt mixture. Characteristics for concrete asphalt prioritize stability. In fact, the most important thing was the stability and durability of the road. Various ways can be done to overcome the road damage and acquire the ideal characteristics such as the use of added materials to Hot Mix Asphalt. To improve the performance of pavement characteristics, the use of added materials was expected to overcome problems that are affected by temperature, weather, increased vehicle volume, and increased traffic load. The added materials are to enhance Reacted and Activated Rubber (RAR) which was a developed crumb rubber to increase durability and keep the level of road pavement stability.</em>

scholarly journals Impact of the Application of Grinding and Grooving of a Concrete Road Pavement on Noise Level in the Environment

2021 ◽  
Vol 1203 (3) ◽  
pp. 032106
Author(s):  
Artur Nowoświat ◽  
Rafał Żuchowski ◽  
Michał Bukała
Keyword(s):  
Noise Level ◽  
Traffic Noise ◽  
The Road ◽  
Road Pavement ◽  
Road Section ◽  
Close Proximity ◽  
Before And After ◽  
Reduction Methods ◽  
On The Road ◽  
The Impact

Abstract A growing number of cars and trucks moving around on our roads contributes to the rise of noise level to which people in their immediate vicinity are exposed. The regulations in force impose on road managers the obligation to limit road noise to the permissible level in compliance with the applicable regulations. The obligation to ensure protection against traffic noise applies equally to newly designed roads and to the existing ones which are being extended or modernized. This type of noise is generated principally by the interaction between tires and road pavement. Therefore, the design and construction of quiet pavements plays a very important role in reducing environmental noise and may in some cases be an alternative to other noise reduction methods. The article undertakes the task of assessing the impact of grinding technology and grooving technology of the existing concrete pavement on the reduction of noise propagation in the environment. The article involves the tests of road pavement made of cement concrete. The tests were carried out on the road section before and after the above-mentioned works, using the method similar to Close Proximity Method (CPX) and the noise measurement method at road edge at a distance of 10.0 m and height of 4.0 m. The obtained results were illustrated with a noise range map for the modified and standard road pavements.

scholarly journals Peningkatan Nilai CBR Tanah Dasar (Sub Grade) dengan Penambahan Kapur dan Abu Sekam Padi

2019 ◽  
Vol 14 (2) ◽  
pp. 24
Author(s):  
Liliwarti -
Keyword(s):  
Bearing Capacity ◽  
Rice Husk ◽  
Soil Stabilization ◽  
Rice Husk Ash ◽  
Road Construction ◽  
Traffic Load ◽  
Rigid Pavement ◽  
The Road ◽  
Road Pavement ◽  
On The Road

The subgrade is very important on road construction, because its functions for support the traffic loads. The subgrade is not able to bearing capacity the traffic load , can cause damage such as cracks, settlement,and deformation on the flexible pavement or rigid pavement. to solve in this problems, it is necessary to improve the mechanical properties of subgrade for increasing soil bearing capacity and reducing the swelling potential. The Sicincin ring road - Lubuk Alung, Padang Pariaman district which has deformed, settlement and cracks on the road pavement, caused by poor bearing capacity of the subgrade. To solve these problems, it is necessary to have the soil improvements (stabilization) for subgrade In this paper soil stabilization is done by mixing soil with lime and rice husk ash (variations in lime content of 5%, 8%, 11%, 14% and 17%) and rice husk ash (constant 2.5%) .The compaction test and CBR test is carried for each variation. The results in this study obtained the most optimal percentage of lime + rice husk ash is 11%, CBR design is 25%, and swelling value of 0.13%. CBR value of subgrade without lime and rice husk ash obtained CBR = 2.3%. So that there is a significantly increase in CBR value if using lime and rice husk ash as stabilization material for subgrade. These results can be used by experts to choose effective stabilization methods.

Desain Perkerasan Jalan Sumberboto - Gununggede Blitar Menggunakan Metode Manual Desain

2021 ◽  
Vol 4 (2) ◽  
pp. 186
Author(s):  
Uminarsih Uminarsih ◽  
Yosef Cahyo Setianto Poernomo ◽  
Agata Iwan Candra ◽  
Fajar Romadhon
Keyword(s):  
Road Construction ◽  
Bottom Layer ◽  
Flexible Pavement ◽  
The Road ◽  
Total Budget ◽  
Road Pavement ◽  
Road Users ◽  
Road Section ◽  
Beach Tourism ◽  
On The Road

The road is an access that connects an area with other areas. With the road, mobility will be easier so that it has an impact on increasing or stabilizing the economy. The Sumberboto-Gunung Gede Blitar road section is one of the access roads to Tambakrejo beach tourism. To improve comfort and safety for road users, it is necessary to improve road quality. This study aims to plan the pavement on the Sumberboto-Gunung Gede Blitar road section. The planning is carried out on the condition of the heavily damaged pavement, with a service life of more than 10 years, the width of the road is 4 meters, the length of the road is 6 kilometers, the type of collector road is class II, and the type of pavement is laston. The planning carried out includes the addition of roads in the hills of Blitar Regency, the data used includes the condition of the sections on the road with calculations referring to the Design Manual Number 02/M/BM/2013 road pavement. The planning results obtained road construction with flexible pavement, with a specification of a surface layer of 10 cm, a layer of 20 cm for the top foundation, 25 cm for the bottom layer of the foundation. From this plan, a total budget of Rp. 13,572,808,084.00 (thirteen billion five hundred seventy-two million eight hundred thousand rupiah) is required. With these results, it can be used as a reference in realizing road construction on the Sumberboto-Gunung Gede Blitar road section.

scholarly journals Deep convolution neural network model in problem of crack segmentation on asphalt images

2019 ◽  
Vol 19 (1) ◽  
pp. 63-73 ◽  
Author(s):  
B. V. Sobol ◽  
A. N. Soloviev ◽  
P. V. Vasiliev ◽  
L. A. Podkolzina
Keyword(s):  
Neural Network ◽  
Convolution Neural Network ◽  
Traffic Load ◽  
The Road ◽  
Road Pavement ◽  
Modeling And Forecasting ◽  
Long Time ◽  
Deep Convolution Neural Network ◽  
On The Road ◽  
Managing System

Introduction.Early defect illumination (cracks, chips, etc.) in the high traffic load sections enables to reduce the risk under emergency conditions. Various photographic and video monitoring techniques are used in the pavement managing system. Manual evaluation and analysis of the data obtained may take unacceptably long time. Thus, it is necessary to improve the conditional assessment schemes of the monitor objects through the autovision.Materials and Methods.The authors have proposed a model of a deep convolution neural network for identifying defects on the road pavement images. The model is implemented as an optimized version of the most popular, at this time, fully convolution neural networks (FCNN). The teaching selection design and a two-stage network learning process considering the specifics of the problem being solved are shown. Keras and TensorFlow frameworks were used for the software implementation of the proposed architecture.Research Results.The application of the proposed architecture is effective even under the conditions of a limited amount of the source data. Fine precision is observed. The model can be used in various segmentation tasks. According to the metrics, FCNN shows the following defect identification results: IoU - 0.3488, Dice - 0.7381.Discussion and Conclusions.The results can be used in the monitoring, modeling and forecasting process of the road pavement wear.

scholarly journals The Limestone as a Materials Combination of Base Course on the Road Pavement

2021 ◽  
Vol 1125 (1) ◽  
pp. 012019
Author(s):  
Yosef Cahyo Setianto Poernomo ◽  
Sigit Winarto ◽  
Zendy Bima Mahardana ◽  
Dwifi Aprillia Karisma ◽  
Rekso Ajiono
Keyword(s):  
The Road ◽  
Road Pavement ◽  
Base Course ◽  
On The Road

scholarly journals PENGARUH KEMACETAN DI SIMPANG SABILILLAH TERHADAP IMPLEMENTASI CITRA LALU LINTAS DI SIMPANG PROGRESIF

2015 ◽  
Vol 9 (2) ◽  
pp. 114
Author(s):  
Supiyono, Dwi Ratnaningsih, Rudy Ariyanto
Keyword(s):  
Road Traffic ◽  
Flame Length ◽  
Traffic Volume ◽  
Signalized Intersections ◽  
Degree Of Saturation ◽  
The Road ◽  
Road Section ◽  
On The Road ◽  
High Traffic Volume

Progress of a country in line with the progress of traffic (transport). Fluency in traffic is determined by the smoothness of traffic on the road. Problems often arise on the highway is congestion at the intersection. Neither was signalized intersections and signalized intersections. Problems at the intersection is less accuracy green flame at the intersection with the number of vehicles in a segment. A road with high traffic volume vehicle green flame low while other road traffic volume small green flame length. So in a long queue roads, while other roads are deserted while still green flame.     This study aims to minimize the occurrence of conflic at the intersection of green flame. Research will make iterations in the intersection, where a road section which will be nominated densely green flame, the flame of the green according to the volume of traffic on these roads. Each road will be a green flame in accordance with the volume of traffic, without having to change any program there is a change in traffic volume.The degree of saturation of the calculation obtained by ....Keywords: roads, hight traffic, progressive intersection, degree saturation

Sign in / Sign up

Export Citation Format

Share Document